Paul Hey wrote:
> Just putting the finishing touches to my new server, and I thought this would be the easy bit!
>
> I have 2 x Mygica T230 USB tuners, and the output of dmesg | grep dvb is as follows:
>
>
[ 3.211959] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
> [ 3.446397] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> [ 3.461827] dvb-usb: schedule remote query interval to 100 msecs.
> [ 3.462180] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
> [ 3.462192] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
> [ 3.697463] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> [ 3.708720] dvb-usb: schedule remote query interval to 100 msecs.
> [ 3.708819] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
> [ 3.708835] usbcore: registered new interface driver dvb_usb_cxusb
> [ 5.558367] dvb-usb: recv bulk message failed: -110
> [ 5.806360] dvb-usb: recv bulk message failed: -110
> [ 6.049085] si2168 7-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
> [ 6.783814] si2157 8-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
> [ 8.364698] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
> [ 9.174276] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
>
>
> Should I be worried about "dvb-usb: recv bulk message failed: -110",
Yes, that usually means there's an error somewhere or the device is borked. Do you have the devices on the same bus - (check lsusb), - if you do, move one to another port.
> -or is this a red herring?-