Hello to all.
My current Tvheadend setup:
Motheboard: Gigabyte GA-N3150N-D2H
RAM: 4GB
TV card: TBS6205 DVB-T2/T/C Quad TV Tuner PCIe Card (using in DVB-C mode)
Operating system: Ubuntu 16.04.3 LTS
Kernel: 4.8.0-58-generic
Driver: tbs-open-linux-drivers_v171016.zip
Tvheadend version: 4.2.5-18~g951777a~xenial
OSCam version: svn11398
Smartcard Reader: 08e6:3437 Gemalto (was Gemplus) GemPC Twin SmartCard Reader
Service Provider: Estonian cable operator STV
I have experianced for some time an issue where I get continuity counter errors and transport error indicators randomly during watching live or recording a broadcast. Randomy means couple of times during two hours or once in an hour.
I have debugged the problem now by letting Tvheadend record a bunch of content and examining the log. What I witness in my logs are the following situations (in short):
...
2018-02-05 01:14:13.721 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: onid 0064 (100) tsid 0006 (6)
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: mux 346MHz in STV
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00CA (202) running 0 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00D5 (213) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00CB (203) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00C9 (201) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00D4 (212) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00D0 (208) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00CD (205) running 0 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00D6 (214) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00D2 (210) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00CE (206) running 0 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: sid 00CC (204) running 4 free_ca 1
2018-02-05 01:14:18.705 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
2018-02-05 01:14:29.608 [WARNING]:TS: STV/306MHz/TV3 Transport error indicator (total 2)
2018-02-05 01:14:29.613 [ DEBUG]:tbl-eit: eit: 306MHz in STV: PID 0012 CC error 7 != 3
2018-02-05 01:14:34.346 [ DEBUG]:cwc: Sending ECM (PID 5103) section=0/0, for service "TV3" (seqno: 10301)
2018-02-05 01:14:34.738 [ DEBUG]:cwc: Received ECM reply (PID 5103) for service "TV3" [0] even: c3.af.37.a9.02.58.8f.e9 odd: f8.a8.51.f1.d4.7f.23.76 (seqno: 10301 Req delay: 387 ms)
2018-02-05 01:14:34.738 [ DEBUG]:descrambler: info - service='TV3' caid=0B00(Conax) provid=000000 ecmtime=387 hops=1 reader='' from='localhost:xxxxx' protocol='newcamd'
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: onid 0064 (100) tsid 0025 (37)
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: mux 618MHz in STV
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: sid 0E7A (3706) running 4 free_ca 1
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: sid 0E79 (3705) running 4 free_ca 1
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: sid 0E78 (3704) running 4 free_ca 1
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: sid 0E77 (3703) running 4 free_ca 1
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: sid 0E76 (3702) running 4 free_ca 1
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: sid 0E75 (3701) running 0 free_ca 1
2018-02-05 01:14:52.867 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
...
2018-02-05 03:33:58.654 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
2018-02-05 03:34:13.664 [WARNING]:TS: STV/306MHz/TV3 Transport error indicator (total 6)
2018-02-05 03:34:13.668 [ DEBUG]:tbl-eit: eit: 306MHz in STV: PID 0012 CC error 14 != 11
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: onid 0064 (100) tsid 0021 (33)
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: mux 602MHz in STV
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: sid 0CEC (3308) running 4 free_ca 1
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: sid 0CE6 (3302) running 4 free_ca 1
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: sid 0CEE (3310) running 4 free_ca 1
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: sid 0CE7 (3303) running 4 free_ca 1
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: sid 0CED (3309) running 4 free_ca 1
2018-02-05 03:34:23.680 [ DEBUG]:tbl-base: sdt: sid 0CE5 (3301) running 4 free_ca 1
2018-02-05 03:34:23.681 [ DEBUG]:tbl-base: sdt: sid 0CE9 (3305) running 4 free_ca 1
2018-02-05 03:34:23.681 [ DEBUG]:tbl-base: sdt: sid 0CEB (3307) running 4 free_ca 1
2018-02-05 03:34:23.681 [ DEBUG]:tbl-base: sdt: sid 0CEA (3306) running 0 free_ca 1
2018-02-05 03:34:23.681 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
2018-02-05 03:34:24.547 [ DEBUG]:cwc: Sending ECM (PID 5103) section=0/0, for service "TV3" (seqno: 14524)
2018-02-05 03:34:24.956 [ DEBUG]:cwc: Received ECM reply (PID 5103) for service "TV3" [0] even: 78.62.f2.cc.44.be.f6.f8 odd: ba.c2.73.ef.22.c6.c4.ac (seqno: 14524 Req delay: 407 ms)
2018-02-05 03:34:24.956 [ DEBUG]:descrambler: info - service='TV3' caid=0B00(Conax) provid=000000 ecmtime=407 hops=1 reader='' from='localhost:xxxxx' protocol='newcamd'
2018-02-05 03:34:28.691 [ DEBUG]:tbl-base: sdt: onid 0064 (100) tsid 0021 (33)
...
2018-02-05 04:48:50.223 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
2018-02-05 04:48:51.033 [ DEBUG]:cwc: Sending ECM (PID 5103) section=0/0, for service "TV3" (seqno: 16774)
2018-02-05 04:48:51.435 [ DEBUG]:cwc: Received ECM reply (PID 5103) for service "TV3" [0] even: fa.f4.54.42.63.c1.57.7b odd: f0.f3.2c.0f.7c.44.f0.b0 (seqno: 16774 Req delay: 403 ms)
2018-02-05 04:48:51.436 [ DEBUG]:descrambler: info - service='TV3' caid=0B00(Conax) provid=000000 ecmtime=403 hops=1 reader='' from='localhost:xxxxx' protocol='newcamd'
2018-02-05 04:48:53.081 [ DEBUG]:tbl-eit: eit: 306MHz in STV: PID 0012 CC error 2 != 14
2018-02-05 04:48:53.111 [WARNING]:TS: STV/306MHz/TV3: MPEG2VIDEO
#301 Continuity counter error (total 2)
2018-02-05 04:48:53.111 [WARNING]:TS: STV/306MHz/TV3: MPEG2AUDIO
#302 Continuity counter error (total 1)
2018-02-05 04:48:57.662 [ DEBUG]:tbl-base: sdt: onid 0064 (100) tsid 0025 (37)
2018-02-05 04:48:57.662 [ DEBUG]:tbl-base: sdt: mux 618MHz in STV
2018-02-05 04:48:57.662 [ DEBUG]:tbl-base: sdt: sid 0E7A (3706) running 4 free_ca 1
2018-02-05 04:48:57.662 [ DEBUG]:tbl-base: sdt: sid 0E79 (3705) running 4 free_ca 1
...
2018-02-05 06:53:30.007 [ INFO]:dvr: About to set stop timer for "Paw Patrol" on "Nickelodeon" at start 1517806500 and original stop 1517807400 and overall stop at 1517808900
2018-02-05 06:53:30.009 [ DEBUG]:service: 3: Nickelodeon si 0x7fc7e80090f0 TurboSight TBS 6205 DVB-T/T2/C #3 : DVB-C #0 weight 0 prio 110 error 0
2018-02-05 06:53:30.009 [ DEBUG]:service: 12: Nickelodeon si 0x7fc7e8030060 TurboSight TBS 6205 DVB-T/T2/C #0 : DVB-C #0 weight 0 prio 210 error 0
2018-02-05 06:53:30.009 [ DEBUG]:service: 9: Nickelodeon si 0x7fc7e8016ba0 TurboSight TBS 6205 DVB-T/T2/C #1 : DVB-C #0 weight 0 prio 310 error 0
2018-02-05 06:53:30.009 [ DEBUG]:service: 6: Nickelodeon si 0x7fc7e801af50 TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-C #0 weight 0 prio 410 error 0
2018-02-05 06:53:30.009 [ INFO]:mpegts: 322MHz in STV - tuning on TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-C #0
2018-02-05 06:53:30.009 [ DEBUG]:linuxdvb: TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-C #0 - starting 322MHz in STV
2018-02-05 06:53:30.009 [ DEBUG]:mpegts: 322MHz in STV - started
2018-02-05 06:53:30.009 [ DEBUG]:mpegts: 322MHz in STV - open PID 0012 (18) [20/0x7fc7e8007760]
2018-02-05 06:53:30.010 [ DEBUG]:tbl-eit: eit: installed table handlers
2018-02-05 06:53:30.010 [ DEBUG]:tbl-eit: eit: grab started
2018-02-05 06:53:30.011 [ DEBUG]:mpegts: 322MHz in STV - open PID 0384 (900) [8/0x560b98af8310]
2018-02-05 06:53:30.011 [ DEBUG]:mpegts: 322MHz in STV - open PID 0385 (901) [8/0x560b98af8310]
2018-02-05 06:53:30.011 [ DEBUG]:mpegts: 322MHz in STV - open PID 0386 (902) [8/0x560b98af8310]
2018-02-05 06:53:30.011 [ DEBUG]:mpegts: 322MHz in STV - open PID 0387 (903) [8/0x560b98af8310]
2018-02-05 06:53:30.011 [ DEBUG]:mpegts: 322MHz in STV - open PID 0388 (904) [8/0x560b98af8310]
2018-02-05 06:53:30.011 [ DEBUG]:mpegts: 322MHz in STV - open PID 0384 (900) [16/0x7fc7e8004be0]
2018-02-05 06:53:30.011 [ DEBUG]:cwc: STV/322MHz/Nickelodeon using CWC localhost:xxxxx
2018-02-05 06:53:30.011 [ INFO]:subscription: 0032: "DVR: Paw Patrol" subscribing on channel "Nickelodeon", weight: 300, adapter: "TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-C #0", network: "STV", mux: "322MHz", provider: "STV", service: "Nickelodeon", profile="matroska"
2018-02-05 06:53:30.061 [WARNING]:linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0
2018-02-05 06:53:30.166 [ DEBUG]:linuxdvb: TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-C #0 - status GOOD (SIGNAL | CARRIER | VITERBI | SYNC | LOCK)
2018-02-05 06:53:30.167 [ DEBUG]:linuxdvb: TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-C #0 - locked
2018-02-05 06:53:30.168 [ DEBUG]:mpegts: 322MHz in STV - open PID 0000 (0) [20/0x7fc7e8006060]
2018-02-05 06:53:30.168 [ DEBUG]:mpegts: 322MHz in STV - open PID 0001 (1) [16/0x7fc7e80179b0]
2018-02-05 06:53:30.168 [ DEBUG]:mpegts: 322MHz in STV - open PID 0010 (16) [16/0x7fc7e8018e30]
2018-02-05 06:53:30.168 [ DEBUG]:mpegts: 322MHz in STV - open PID 0011 (17) [20/0x7fc7e8009a90]
2018-02-05 06:53:30.168 [ DEBUG]:mpegts: 322MHz in STV - open PID 0011 (17) [16/0x7fc7e800af10]
2018-02-05 06:53:30.181 [ DEBUG]:mpegts: 322MHz in STV - open PID 14BD (5309) [32/0x7fc7e8015430]
2018-02-05 06:53:30.181 [ DEBUG]:service: STV/322MHz/Nickelodeon: Status changed to [Hardware input]
2018-02-05 06:53:30.181 [ DEBUG]:service: STV/322MHz/Nickelodeon: Status changed to [Hardware input] [Input on service]
2018-02-05 06:53:30.181 [ DEBUG]:service: STV/322MHz/Nickelodeon: Status changed to [Hardware input] [Input on service] [No access]
2018-02-05 06:53:30.181 [ DEBUG]:service: STV/322MHz/Nickelodeon: Status changed to [Hardware input] [Input on service] [Demuxed packets] [No access]
2018-02-05 06:53:30.211 [ DEBUG]:tbl-base: nit: network 0064 (100) [STV]
2018-02-05 06:53:30.211 [ DEBUG]:tbl-base: nit: DVB-C freq 306000000 sym 6956000 mod QAM/256 fec AUTO
2018-02-05 06:53:30.211 [ DEBUG]:tbl-base: nit: onid 0064 (100) tsid 0001 (1) mux 306MHz in STV
2018-02-05 06:53:30.211 [ DEBUG]:tbl-base: nit: service 038F (911) type 01 (1)
2018-02-05 06:53:30.211 [ DEBUG]:tbl-base: nit: service 0388 (904) type 01 (1)
...
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: mux 346MHz in STV
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00CA (202) running 0 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00D5 (213) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00CB (203) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00C9 (201) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00D4 (212) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00D0 (208) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00CD (205) running 0 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00D6 (214) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00D2 (210) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00CE (206) running 0 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: sid 00CC (204) running 4 free_ca 1
2018-02-05 06:57:46.002 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
2018-02-05 06:57:48.168 [ DEBUG]:cwc: Sending ECM (PID 5309) section=0/0, for service "Nickelodeon" (seqno: 17608)
2018-02-05 06:57:48.568 [ DEBUG]:cwc: Received ECM reply (PID 5309) for service "Nickelodeon" [0] even: c6.3f.4a.4f.7b.9e.61.7a odd: 7e.e2.05.65.09.52.fd.58 (seqno: 17608 Req delay: 399 ms)
2018-02-05 06:57:48.568 [ DEBUG]:descrambler: info - service='Nickelodeon' caid=0B00(Conax) provid=000000 ecmtime=399 hops=1 reader='' from='localhost:xxxxx' protocol='newcamd'
2018-02-05 06:57:50.704 [WARNING]:TS: STV/322MHz/Nickelodeon Transport error indicator (total 1)
2018-02-05 06:57:50.709 [ DEBUG]:tbl-eit: eit: 322MHz in STV: PID 0012 CC error 14 != 13
2018-02-05 06:57:50.709 [ DEBUG]:tbl-eit: eit: 322MHz in STV: PID 0012 CC error 0 != 15
2018-02-05 06:57:50.709 [ DEBUG]:tbl-eit: eit: 322MHz in STV: PID 0012 CC error 2 != 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: onid 0064 (100) tsid 0009 (9)
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: mux 370MHz in STV
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01FE (510) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01F8 (504) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01FB (507) running 0 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01FC (508) running 0 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01FF (511) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01F7 (503) running 4 free_ca 0
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01F6 (502) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01FA (506) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01F9 (505) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 0200 (512) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: sid 01F5 (501) running 4 free_ca 1
2018-02-05 06:57:51.245 [ DEBUG]:tbl-base: sdt: completed pid 17 table 00000040 / 000000f8
...
EPG grabber in use is "Over-The-Air EIT: DVB Gabber".
Could someone shed some light on this why those CC and TS errors actually happen :-) ? Or is it just me who cannot configure the service properly?
Thank you in advance,
Anti.
