Project

General

Profile

Big truble with TT CT-3650 Ci USB HD

Added by ovidiu marius almost 10 years ago

I installed on my linux server (debian squeeze) with last s2-liplianin driver and on dmesg | grep -i dvb, dvb card looks ok, loaded and ready to use but when I start tvheadend dvb card crash and give only errors.
In same configuration I use TT S2 - 3650 CiUSB HD and works perfect with tvheadend.

Please can someone give me a tip to make this dvb-c/t card to work with linux ???


Replies (6)

RE: Big truble with TT CT-3650 Ci USB HD - Added by Hein Rigolo almost 10 years ago

Why do you use the s2-liplianin drivers and not the default linux dvb drivers. As fas as i can tell this device is supported by the default kernel drivers.

RE: Big truble with TT CT-3650 Ci USB HD - Added by ovidiu marius almost 10 years ago

How can I use default kernel drivers ??
I don't know how can I set lt this card with default drivers, if you know can you show me how can I do this ?

Without s2-liplianin driver dvb card seems to appear ok on usb as : Bus 001 Device 002: ID 0b48:300d TechnoTrend AG TT-connect CT-3650 CI but not as dvb device so how can I use this on tvheadend ???

RE: Big truble with TT CT-3650 Ci USB HD - Added by Hein Rigolo almost 10 years ago

what kernel version are you running?

What you could do is manually compile the linux media kernel drivers and get the latest/greatest version.
see this to do this:
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers

Hein

RE: Big truble with TT CT-3650 Ci USB HD - Added by ovidiu marius almost 10 years ago

I have 2 devices :

Router Station Pro with Debwrt and 2.6.32.20 kernel (TT S2-3650 works TT CT-3650 don't works) and Pc with debian squeeze kernel 2.6.32-5 ( TT S2-3650 work, TT CT-3650 don't work) on bouth devices I have the same problem: TT CT-3650 seems to be ok until I start tvheadend.
As I say I try to install media_build packeage but I got only errors, I install v4l-dvb driver (TT CT-3650 appear ok only dvb-c but when I start tvheadend I got same problems) and when I install s2-liplianin I got bouth tunners C and T but with tvheadend again problems.

Here is what I have until I start tvheadend:

[email protected]:~# dmesg | grep -i dvb
dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT-connect CT-3650)
DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT-connect CT-3650)
DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)...
dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_ttusb2
[email protected]:~#

And here is what I have after I start tvheadend :

[email protected]:~# dmesg | grep -i dvb
dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT-connect CT-3650)
DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Technotrend TT-connect CT-3650)
DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)...
dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_ttusb2
tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
usb 1-1: firmware: requesting dvb-fe-tda10048-1.0.fw
dvb-usb: recv bulk message failed: -145
dvb-usb: bulk message failed: -145 (9/0)
dvb-usb: bulk message failed: -145 (8/0)
dvb-usb: bulk message failed: -145 (8/0)
dvb-usb: bulk message failed: -145 (9/0)
dvb-usb: bulk message failed: -145 (8/0)
dvb-usb: bulk message failed: -145 (9/0)
dvb-usb: bulk message failed: -145 (9/0)
dvb-usb: bulk message failed: -145 (21/0)
dvb-usb: bulk message failed: -145 (9/0)
dvb-usb: bulk message failed: -145 (9/0)
dvb-usb: bulk message failed: -145 (8/0)
DVB: TDA10023: tda10023_readreg: readreg error (reg 0x03, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023: tda10023_writereg, writereg error (reg 0x03, val 0x00, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023(0): tda10023_writereg, writereg error (reg 0x0a, val 0xed, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023: tda10023_writereg, writereg error (reg 0x0b, val 0x1b, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023(0): tda10023_writereg, writereg error (reg 0x0c, val 0x1e, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023: tda10023_writereg, writereg error (reg 0x0d, val 0x88, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023(0): tda10023_writereg, writereg error (reg 0x3d, val 0x00, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023: tda10023_writereg, writereg error (reg 0x05, val 0x46, ret 0)
dvb-usb: bulk message failed: -145 (9/0)
DVB: TDA10023(0): tda10023_writereg, writereg error (reg 0x08, val 0x43, ret 0)
[email protected]:~#

RE: Big truble with TT CT-3650 Ci USB HD - Added by ovidiu marius almost 10 years ago

It seems that nobody will help me with advice ...

RE: Big truble with TT CT-3650 Ci USB HD - Added by Hein Rigolo almost 10 years ago

we also have other things to do besides offering free advice and help on this forum...... please keep that in mind.

But:

This line in your dmesg might point to the real issue:

dvb-usb: recv bulk message failed: -145

somehow the usb device can not correctly communicate with your system.

I can understand why you get problems when you try to use linux-media drivers (the same that are in the mainline kernel). This is because they do not really work well with your kernel versions. I would suggest to try to update to a more recent kernel and then try to see what happens.

Also try to get the card working with the dvb-apps programs first. For more information about testing your dvb hardware please look at the linuxtv.org wiki for more information.

Hein

    (1-6/6)