Project

General

Profile

cant find hellassat 39E + problems with oscam / camd.socket

Added by lord zerg about 10 years ago

hello , i want to ask you about adding satellite , i cant find Hellas sat 39E in satelites. how can i add it ? or im wrong in instalation ?


Replies (7)

RE: cant find hellassat 39E in satellites config - Added by Hein Rigolo about 10 years ago

You can manually add the mux information on the DVB Multiplexes tab under Configuration - DVB Adapters.
The pre configured satellite information under the "Add DVB Network" is just there to help you with adding this information in bulk.

Hein

RE: cant find hellassat 39E in satellites config - Added by lord zerg about 10 years ago

i add a mux even 2-3 muxes but nothing happens and it not find and any channel and any new transponders found. im sorry but i cant understand i readed any readmes and all the things and this still cant find transponders and channels... can you explain me what to do ?

RE: cant find hellassat 39E in satellites config - Added by Hein Rigolo about 10 years ago

can you give some more details on what information you added where? (maybe some screen shots?)

Hein

RE: cant find hellassat 39E in satellites config - Added by lord zerg about 10 years ago

I finally added 1 transponder manually and then 2 and 3 i found my mistake it is - Mhz of the transponder they must be 12,524,000 30,000,000 and no i added few but others not added automaticly ... why?
And i dont now what is NIT o network id is it provider ID ?
next of my questions is - what i must choose for S1 transponder i choose apsk-8 don't know is it good or no i don't know the details and if i have 2 LNBs in 2 dishes how can i add 2 provider ids so i can watch 2 providers ? :)
i'm sorry too much questions but here things are little different as i know them :)

RE: cant find hellassat 39E in satellites config - Added by Hein Rigolo about 10 years ago

Nit-o is only need if your provider does not correctly report the actual network. This is something that usually only happens on dvb-c networks. You should leave it empty if you do not need it. Using a bit of google you can see that the dvb-s transponders on your sat is using qpsk and the dvb-s2 is using 8-psk.

If your provider transmits the other transportstreams it can be picked up if you have enabled Autodetect muxes. If it does not, then you need to add them manually.

Have a look at this page with some more info about your sat.
http://en.kingofsat.net/sat-hellas2.php

RE: cant find hellassat 39E in satellites config - Added by lord zerg almost 10 years ago

now everything works but i have final (maybe) question :)
i sucessfully scan channels and i know how tvheadend works :) at last :)
now my problem is how to conect it with CCcam or oscam i found the Campt. camd.socket section and did it with 9000 port
in oscam i enabled dvb-api without AU update without username and without box type - i think this is useless...
i enabled camd3.5 with 9000 port and thats all but i think thats not enough tvheadend shows it green it means it connect but the thing is no cards are going to tvheadend
with newcamd is working perfect but there i need to setup new users for every provider im gona watch... and thats not cool :) i prefer camd.socket way
pls someone give advice what i forgot or im doing wrong and i dont know :)

RE: cant find hellassat 39E + problems with oscam / camd.socket - Added by Hein Rigolo almost 10 years ago

camd.socket is already flagged as not maintained and will be removed in the (near) future. So do not use this.

So CWC is the way forward. So that means you need to have a cardserver that can talk the newcamd protocol. OScam is a good option.
This also means that you do not use the DVB-API of OScam.

Tvheadend will forward ECM requests to the OScam server and also EMM updates if this is available for the encryption that you need to use.

Hein
p.s.: Please create a new topic if you have more questions etc.

    (1-7/7)