Are you sure that you don't have any problem?
dvb.txt
[ 9.061608] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 9.061612] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 9.065504] cx88[0]/2: dvb_register failed (err = -22)
[ 9.500290] dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in cold state, will try to load a firmware
[ 9.948574] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 10.651205] dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in warm state.
[ 10.651258] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 11.052856] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 11.407766] dvb-usb: schedule remote query interval to 50 msecs.
[ 11.407770] dvb-usb: Hauppauge Nova-TD-500 (84xxx) successfully initialized and connected.
[ 11.407914] usbcore: registered new interface driver dvb_usb_dib0700
Line 3 problem registering frontend
[ 9.177093] cx88-mpeg driver manager 0000:05:05.2: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 9.177096] cx88[0]/2-bb: ERROR: Hotplug firmware request failed (v4l-cx2341x-enc.fw).
[ 9.177098] cx88[0]/2-bb: Please fix your hotplug setup, the board will not work without firmware loaded!
[ 9.194050] cx88-mpeg driver manager 0000:05:05.2: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 9.194053] cx88[0]/2-bb: ERROR: Hotplug firmware request failed (v4l-cx2341x-enc.fw).
[ 9.194055] cx88[0]/2-bb: Please fix your hotplug setup, the board will not work without firmware loaded!
[ 9.500290] dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in cold state, will try to load a firmware
[ 9.948574] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 10.150263] dib0700: firmware started successfully.
[ 3282.297539] cx88-mpeg driver manager 0000:05:05.2: Direct firmware load for v4l-cx2341x-enc.fw failed with error -2
[ 3282.297547] cx88[0]/2-bb: ERROR: Hotplug firmware request failed (v4l-cx2341x-enc.fw).
[ 3282.297549] cx88[0]/2-bb: Please fix your hotplug setup, the board will not work without firmware loaded!
missing firmware v4l-cx2341x-enc.fw
[ 8.862136] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1
[ 9.061618] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 9.065502] cx88[0]/2: frontend initialization failed
[ 10.860337] usb 3-1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 11.191119] usb 3-1: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
again frontend problem
find firmware
v4l-cx2341x-enc.fw and put it in
/lib/firmware
or where you distro put them, and test again.