Phily D wrote:
> Hey folks,
> I'm struggling to configure something that should be easy from what I can tell from my searches. Hopefully someone can give me a few pointers
>
> I have a SAT>IP box connected to a multi-switch (all 4 inputs).
>
> The multi-switch has two sat dish inputs, controllable via diesqc;
> - one which is from an quad LNB pointed to Astra 28.8e.
> - one connected to another dish pointed towards Eutelsat 9e with a KA Band LNB for the local Irish unencrypted stations (Saorsat)
>
> It works great with other STBs so it isn't a multi-switch issue.
>
> I can get TVH to scan/tune 28.8e easily, but I can't for the life of me get it to detect (from what I can see) the second sat. Maybe I'm not sending the correct diesqc controls etc.
>
> Do I configure minisatip in the SAT>IP box (running satip-axe) to know about the second sat OR is this done via TVH?
I had the same problem. With minisatip there is a problem with the speed of the commands sent to the Diseqc switch. For satip-axe, this solution worked:
vi /etc/sysconfig/config
MINISATIP7="yes"
MINISATIP7_OPTS="--diseqc *:*2-1"
You can also try:
--diseqc-multi
:4
--diseqc-timing :250-54-15-15-15-0