Pede Bhj wrote:
> Hi guys,
>
> I am going crazy after having tried to get TVHeadend setup for a week or so.
>
> The setup:
> Raspberry Pi 2B
> OpenElec 6.0
> TVHeadend 4.0.3
> TT CT2-4400
>
> The stick seems to be working:
>
> > /storage/.kodi/addons$ dmesg | grep dvb
> > [ 6.114942] usb 1-1.4: dvb_usb_v2: found a 'TechnoTrend TVStick CT2-4400' in warm state
> > [ 6.115349] usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
> > [ 6.116781] usb 1-1.4: dvb_usb_v2: MAC address: bc:ea:2b:44:07:c1
> > [ 6.502274] usb 1-1.4: dvb_usb_v2: schedule remote query interval to 300 msecs
> > [ 6.502290] usb 1-1.4: dvb_usb_v2: 'TechnoTrend TVStick CT2-4400' successfully initialized and connected
> > [ 6.502417] usbcore: registered new interface driver dvb_usb_dvbsky
> > [ 235.505688] si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
>
> I have setup TVHeadend following various guides.
> I am looking for DVB-C in Denmark for "Stofanet".
> From w_scan I get the following (not the full list):
>
> > # C[2] <freq> <sr> <fec> <mod> [plp_id] [data_slice_id] [system_id] [# comment]
> > #------------------------------------------------------------------------------
> > C 378000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 386000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 394000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 402000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 410000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 418000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 426000000 6900000 NONE QAM256 # Stofa Bredballe
> > C 434000000 6900000 NONE QAM256 # Stofa Bredballe
>
> No matter how I try to setup the network/muxes the scan just "FAIL" instantly with no additional information to try to debug myself.
> I would greatly appreciate any assistance I can get.
>
> Thanks a lot!
> /phatty
>
>
http://s23.postimg.org/4c0cezf3f/Udklip.png
I don't personally use DVB-C but you may want to try adding additional zeros to the Symbol rate so it matches with the frequency. Also if you're running firmware 4.0.19 try an older version (4.0.11 for example) as I've had issues receiving DVB-T/T2 when using that firmware.