Elgato DVB>IP Server 1.1.0-402r1, Feb 19 2015, 17:49:21
Name: EyeTV Netstream 4C (2422)
System Status: {"CpuInfo":{"CPUs":1,"Idle":99,"Io":0,"Irq":0,"Nice":0,"Sirq":0,"Sys":0,"Usr":0}}
Board ID: 1
Streams: 4
(# Initialized Type Available Connected Active StreamID Setup Receiving Lock Transcoding TSPacketsReceived rate index sessionID [clientInfo])
#1: 1 6 1 1 0 -1 0 0 1 0 0
#2: 1 6 1 1 0 -1 0 0 0 0 0
#3: 1 6 1 1 0 -1 0 0 0 0 0
#4: 1 6 1 1 0 -1 0 0 0 0 0
Users:
[
    ]
==== Multicast ====
IP:224.0.0.22 hasMembers:1 refreshCounter: 0 lastReportTime: 120412
IP:239.255.255.250 hasMembers:1 refreshCounter: 0 lastReportTime: 2503
IP:224.0.0.251 hasMembers:1 refreshCounter: 0 lastReportTime: 4363
IP:224.0.0.252 hasMembers:1 refreshCounter: 0 lastReportTime: 120412
IP:224.0.0.2 hasMembers:1 refreshCounter: 0 lastReportTime: 120412
IP:239.2.0.252 hasMembers:1 refreshCounter: 0 lastReportTime: 124152
The date in the Tombea version output does not seem to be the compile date.
[ARCLinux]$ ls -l /usr/bin/T*
-rwxr-xr-x    1 root     root       3633240 Feb 19  2015 /usr/bin/Tombea
but your binary seems to be newer anyway.
[ARCLinux]$ Tombea --show-ports -i 1 --show-ip --verbose -D
Elgato DVB>IP Server 1.1.0-402r1, Feb 19 2015, 17:49:21
Compiled for ViXS ARC700 platform, XCode Version 4A5546
Copyright (C) 2013-2014 Elgato Systems GmbH, Germany
setting verbose mode
do not fork into background
17:20:28.8524  2714@     dbgcommand(): using printf
17:20:28.8661  2714@     main(): ===
17:20:28.8667  2714@     main(): # of addresses: 1
17:20:28.8674  2714@     main(): 'eth0': '10.10.0.103'
17:20:28.8680  2714@     main(): ===
17:20:28.8686  2714@     main(): en0 MAC address: '00:0C:6C:08:09:76'
17:20:28.8693  2714@     main(): ===
17:20:28.8699  2714@     main(): en0 IP address: '10.10.0.103'
MAC 00:0C:6C:08:09:76, IP 10.10.0.103 (total 1 IP), S/N 2422
HTTP port 10.10.0.103:80, RTSP port 10.10.0.103:554
17:20:28.8713  2714@     main(): Serial Number: '2422'
17:20:28.8721  2714@     main(): Hardware: Netstream 4C
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x0000097e to mii Register 0x10 (PHY Ctl Reg) ... OK
17:20:28.9013  2714@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x10 (PHY Ctl Reg) = 0x0000097e
17:20:28.9113  2714@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x01 (Phy Status Reg) = 0x0000796d
17:20:28.9214  2714@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x11 (PHY Sts Reg) = 0x0000ad42
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x00000007 to mii Register 0x1f (Page Select Reg) ... OK
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x000000a0 to mii Register 0x1e (Ext Page Sel Reg) ... OK
17:20:28.9512  2714@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x1a (RXC SSC Reg) = 0x00003850
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x00003850 to mii Register 0x1a (RXC SSC Reg) ... OK
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x00000000 to mii Register 0x1f (Page Select Reg) ... OK
17:20:28.9720  2714@     ReconfigurePHY(): Eth0 PHY state: up, ready, 1000M, duplex, crossover
17:20:28.9838  2744@     Watchdog_thread_proc(): +++ Watchdog_thread_proc(): Watchdog Thread Started...
Board ID:  1
17:20:28.9859  2714@     main(): adding VixsDevice #1
17:20:28.9867  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:28.9881  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:28.9910  2714@     walk_options(): CEVixsDevice: setting verbose output mode
17:20:28.9958  2714@     CEVixsDeviceController::CEVixsDeviceController(): Loading station list from disk ...
17:20:28.9977  2714@     CESATIPStream::Clear(): clearing
17:20:28.9984  2714@     CESATIPStream::Stop(): stopping 0...
17:20:28.9990  2714@     CESATIPStream::Stop(): stopping 0 done.
17:20:28.9998  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0004  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0012  2714@     main(): adding VixsDevice #2
17:20:29.0019  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:29.0025  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:29.0049  2714@     CESATIPStream::Clear(): clearing
17:20:29.0058  2714@     CESATIPStream::Stop(): stopping 0...
17:20:29.0064  2714@     CESATIPStream::Stop(): stopping 0 done.
17:20:29.0071  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0077  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0085  2714@     main(): adding VixsDevice #3
17:20:29.0093  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:29.0099  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:29.0123  2714@     CESATIPStream::Clear(): clearing
17:20:29.0130  2714@     CESATIPStream::Stop(): stopping 0...
17:20:29.0139  2714@     CESATIPStream::Stop(): stopping 0 done.
17:20:29.0146  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0153  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0160  2714@     main(): adding VixsDevice #4
17:20:29.0167  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:29.0173  2714@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:29.0199  2714@     CESATIPStream::Clear(): clearing
17:20:29.0206  2714@     CESATIPStream::Stop(): stopping 0...
17:20:29.0212  2714@     CESATIPStream::Stop(): stopping 0 done.
17:20:29.0218  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0225  2714@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0237  2746@     StaticWorkerThreadEntry(): worker thread running...
17:20:29.0287  2747@     CEplThread::ThreadProc(): ***attaching thread 2747, EPL
17:20:29.0298  2747@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0305  2747@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0337  2748@     CEplThread::ThreadProc(): ***attaching thread 2748, EPL
17:20:29.0345  2748@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0353  2748@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0396  2746@     CEplIGMPTracker::Start(): Starting
17:20:29.0398  2746@     CEplIGMPTracker::StartSocket(): Starting on '224.0.0.1'
17:20:29.0405  2746@     CEplIGMPTracker::StartSocket(): Starting on '224.0.0.22'
17:20:29.0417  2746@     CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:20:29.0423  2746@     CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:20:29.0437  2747@     walk_options(): VixsHAL: setting verbose output mode
17:20:29.0456  2747@     walk_options(): DVB-C FrontEnd: setting verbose output mode
17:20:29.0461  2747@     I2C_Init(): I2Clib: I2C system clock            = 25.000MHz
17:20:29.0463  2747@     I2C_Init(): I2Clib: I2C bus clock               = 400kHz
17:20:29.0465  2747@     I2C_Init(): I2Clib: I2C atomic period           = 62 sysclocks
17:20:29.0468  2747@     I2C_Init(): I2Clib: I2C bus timeout             = 700 sysclocks (11.3 i2cclocks)
17:20:29.0470  2747@     I2C_Init(): I2Clib: I2C read timeout            = 3000ms
17:20:29.0472  2747@     I2C_Init(): I2Clib: I2C write timeout           = 3000ms
17:20:29.0474  2747@     I2C_Init(): I2Clib: duration warning threshold  = 100000us
17:20:29.0475  2747@     DVBC_FE_FrontendInit(): [ZIM1902] Start init first MXL251 ...
17:20:29.0495  2750@     CEplThread::ThreadProc(): ***attaching thread 2750, EPL
17:20:29.0503  2750@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0511  2750@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0521  2749@     CEplThread::ThreadProc(): ***attaching thread 2749, EPL
17:20:29.0528  2749@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0546  2749@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0632  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1...
17:20:29.4889  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:29.4896  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:20:29.4904  2747@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:20:29.4918  2747@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:20:30.2732  2746@     CESATIPServer::SetIdle(): waited long enough for frontend 1 (11)
17:20:30.2735  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1 done.
17:20:30.2832  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2...
17:20:31.2813  2747@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:20:31.4932  2746@     CESATIPServer::SetIdle(): waited long enough for frontend 2 (11)
17:20:31.4934  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2 done.
17:20:31.5032  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3...
17:20:32.7131  2746@     CESATIPServer::SetIdle(): waited long enough for frontend 3 (11)
17:20:32.7134  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3 done.
17:20:32.7232  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4...
17:20:33.2887  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:33.2894  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:20:33.3391  2747@     DVBC_FE_FrontendInit(): [ZIM1902] End init first MXL251
17:20:33.3398  2747@     DVBC_FE_FrontendInit(): [ZIM1902] Start init second MXL251 ...
17:20:33.4805  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:33.4812  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:20:33.4820  2747@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:20:33.4829  2747@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:20:33.9332  2746@     CESATIPServer::SetIdle(): waited long enough for frontend 4 (11)
17:20:33.9334  2746@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4 done.
17:20:33.9337  2746@     MyCESATIPServerClient::CESATIPServerClient_IdleMode(): server is idle. Going into low-power mode
17:20:33.9344  2751@     StandbyClock_thread_proc(): +++ StandbyClock_thread_proc(): Standby Clock Thread Started...
17:20:34.0436  2746@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.22' added to multicast list. size() is now 1
17:20:34.0441  2746@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.255.255.250' added to multicast list. size() is now 2
17:20:34.0445  2746@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.2' added to multicast list. size() is now 3
17:20:34.0448  2746@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.252' added to multicast list. size() is now 4
17:20:34.0452  2746@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.251' added to multicast list. size() is now 5
17:20:34.7634  2746@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.2.0.252' added to multicast list. size() is now 6
17:20:35.2783  2747@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:20:37.2889  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:37.2896  2747@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:20:37.3394  2747@     DVBC_FE_FrontendInit(): [ZIM1902] End init second MXL251
17:20:37.3700  2747@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3708  2747@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.3800  2748@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3803  2748@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.3900  2750@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3902  2750@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.3995  2749@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3998  2749@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.4032  2746@     StaticWorkerThreadEntry(): server initialized after 8361ms
Server initialized after 8361ms
17:20:37.4041  2746@     StaticWorkerThreadEntry(): # of DVB-C frontends:  4
17:20:37.4043  2746@     StaticWorkerThreadEntry(): # of DVB-T frontends:  0
17:20:37.4045  2746@     StaticWorkerThreadEntry(): # of DVB-T2 frontends: 0
17:20:37.4047  2746@     StaticWorkerThreadEntry(): # of DVB-S2 frontends: 0
Number of DVB-C frontends:  4
17:20:37.4059  2746@     CEDeviceHTTPServer::Start(): accepting connections
17:20:37.4067  2746@     CEDeviceHTTPServer::Start(): accepting connections
17:20:37.4072  2746@     StaticWorkerThreadEntry(): Server Name 'EyeTV Netstream 4C (2422)'
17:20:37.4151  2746@     CESATIPServer::SetStreamIDItemName(): changing mStreamIDItemName from "com.ses.streamID" to "com.elgato.streamID"
17:20:37.4165  2746@     CESATIPServer::SetDeviceID(): changing mDeviceID from 1 to 103
17:20:37.4333  2746@     StaticWorkerThreadEntry(): setting RTSP dump to 0 and HTTP dump to 0
17:20:44.0431  2751@     VixsDeviceStandby(): ##### VixsDeviceStandby(1) in #################################################
17:20:44.0434  2751@     VixsDeviceDebug(): g_IDLE_thread_alive    = 0, g_IDLE_thread_running   = 0
17:20:44.0437  2751@     VixsDeviceDebug(): g_IDLE_thread_started  = 0, g_IDLE_thread_stopped   = 0
17:20:44.0439  2751@     VixsDeviceDebug(): g_pTaskScheduler.empty = 0, g_pTaskScheduler->empty = 1, g_bTaskValid        = 0
17:20:44.0441  2751@     VixsDeviceDebug(): g_bInStandby           = 0, g_bStandbyPending       = 0
17:20:44.0443  2751@     VixsDeviceDebug(): g_bEnableIdleScan      = 0, g_bIdleScanPending      = 0, g_bMustAbortScan    = 0
17:20:44.0445  2751@     VixsDeviceDebug(): g_bIdleScanStarted     = 0, g_bIdleScanFinished     = 0, g_iIdleScanProgress = 0
17:20:44.0447  2751@     VixsDeviceDebug(): g_bIdleScanRunning     = 0, g_lIdleScanInterval     = 604800, default = 604800
17:20:44.0449  2751@     VixsDeviceDebug(): g_LastIdleScanStart    = [never] (-1)
17:20:44.0451  2751@     VixsDeviceDebug(): g_LastIdleScanFinish   = [never] (-1)
17:20:44.0453  2751@     VixsDeviceDebug(): g_LastIdleScanDuration = [undefined] (-1), Stations Found: 0
17:20:44.0455  2751@     VixsDeviceStandby(): ##### VixsDeviceStandby(1) out ################################################
17:21:00.3235  2746@     CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:21:00.3243  2746@     CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:21:42.6533  2746@     CEplIGMPTracker::Process(): 10.10.0.1 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:21:42.6542  2746@     CEplIGMPTracker::Process(): we became non-querier because 0x0A0A0067 > 0x0A0A0001
17:22:22.4130  2746@     CESATIPServer::Process(): iter->refreshCounter is now 1 for '239.255.255.250'
17:22:22.4138  2746@     CESATIPServer::Process(): RefreshMcAddr() for '239.255.255.250'
17:22:22.4148  2746@     CEplIGMPTracker::RefreshMcAddr(): len=36, lenRequested=36
17:22:22.4157  2746@     CEplIGMPTracker::Process(): 10.10.0.103 -> 239.255.255.250 mc:239.255.255.250 QRV:2 QQIC:125 numSrc:0
17:22:22.8730  2746@     CESATIPServer::Process(): iter->refreshCounter is now 1 for '239.255.255.250'
17:22:22.8737  2746@     CESATIPServer::Process(): RefreshMcAddr() for '239.255.255.250'
17:22:22.8747  2746@     CEplIGMPTracker::RefreshMcAddr(): len=36, lenRequested=36
17:22:22.8755  2746@     CEplIGMPTracker::Process(): 10.10.0.103 -> 239.255.255.250 mc:239.255.255.250 QRV:2 QQIC:125 numSrc:0
no TV adapter visible.
[ARCLinux]$ Tombea --show-ports -i 1 --no-alternate-discovery --show-ip --verbose -D
Elgato DVB>IP Server 1.1.0-402r1, Feb 19 2015, 17:49:21
Compiled for ViXS ARC700 platform, XCode Version 4A5546
Copyright (C) 2013-2014 Elgato Systems GmbH, Germany
setting verbose mode
using Sat-IP discovery for DVB-C
do not fork into background
17:30:29.7274  2882@     dbgcommand(): using printf
17:30:29.7411  2882@     main(): ===
17:30:29.7418  2882@     main(): # of addresses: 1
17:30:29.7424  2882@     main(): 'eth0': '10.10.0.103'
17:30:29.7430  2882@     main(): ===
17:30:29.7436  2882@     main(): en0 MAC address: '00:0C:6C:08:09:76'
17:30:29.7444  2882@     main(): ===
17:30:29.7450  2882@     main(): en0 IP address: '10.10.0.103'
MAC 00:0C:6C:08:09:76, IP 10.10.0.103 (total 1 IP), S/N 2422
HTTP port 10.10.0.103:80, RTSP port 10.10.0.103:554
17:30:29.7465  2882@     main(): Serial Number: '2422'
17:30:29.7471  2882@     main(): Hardware: Netstream 4C
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x0000097e to mii Register 0x10 (PHY Ctl Reg) ... OK
17:30:29.7765  2882@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x10 (PHY Ctl Reg) = 0x0000097e
17:30:29.7864  2882@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x01 (Phy Status Reg) = 0x0000796d
17:30:29.7964  2882@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x11 (PHY Sts Reg) = 0x0000ad42
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x00000007 to mii Register 0x1f (Page Select Reg) ... OK
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x000000a0 to mii Register 0x1e (Ext Page Sel Reg) ... OK
17:30:29.8263  2882@     ReadMII():
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 mii Register 0x1a (RXC SSC Reg) = 0x00003850
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x00003850 to mii Register 0x1a (RXC SSC Reg) ... OK
****************************************************
*  synopGMAC debug Utility for Linux               *
*  Copyright(c) 2007-2007 Synopsys, Inc            *
*  Modified 2014 for Elgato Systems by Rolf Bartz  *
****************************************************
eth0 write 0x00000000 to mii Register 0x1f (Page Select Reg) ... OK
17:30:29.8472  2882@     ReconfigurePHY(): Eth0 PHY state: up, ready, 1000M, duplex, crossover
17:30:29.8591  2912@     Watchdog_thread_proc(): +++ Watchdog_thread_proc(): Watchdog Thread Started...
Board ID:  1
17:30:29.8612  2882@     main(): adding VixsDevice #1
17:30:29.8621  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8628  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8658  2882@     walk_options(): CEVixsDevice: setting verbose output mode
17:30:29.8703  2882@     CEVixsDeviceController::CEVixsDeviceController(): Loading station list from disk ...
17:30:29.8723  2882@     CESATIPStream::Clear(): clearing
17:30:29.8731  2882@     CESATIPStream::Stop(): stopping 0...
17:30:29.8737  2882@     CESATIPStream::Stop(): stopping 0 done.
17:30:29.8745  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8751  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8759  2882@     main(): adding VixsDevice #2
17:30:29.8766  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8772  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8797  2882@     CESATIPStream::Clear(): clearing
17:30:29.8804  2882@     CESATIPStream::Stop(): stopping 0...
17:30:29.8811  2882@     CESATIPStream::Stop(): stopping 0 done.
17:30:29.8818  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8826  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8832  2882@     main(): adding VixsDevice #3
17:30:29.8847  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8854  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8877  2882@     CESATIPStream::Clear(): clearing
17:30:29.8884  2882@     CESATIPStream::Stop(): stopping 0...
17:30:29.8892  2882@     CESATIPStream::Stop(): stopping 0 done.
17:30:29.8898  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8906  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8912  2882@     main(): adding VixsDevice #4
17:30:29.8918  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8921  2882@     CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8939  2882@     CESATIPStream::Clear(): clearing
17:30:29.8942  2882@     CESATIPStream::Stop(): stopping 0...
17:30:29.8944  2882@     CESATIPStream::Stop(): stopping 0 done.
17:30:29.8946  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8948  2882@     CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8957  2914@     StaticWorkerThreadEntry(): worker thread running...
17:30:29.9019  2915@     CEplThread::ThreadProc(): ***attaching thread 2915, EPL
17:30:29.9041  2916@     CEplThread::ThreadProc(): ***attaching thread 2916, EPL
17:30:29.9051  2916@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9057  2916@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9101  2914@     CEplIGMPTracker::Start(): Starting
17:30:29.9108  2914@     CEplIGMPTracker::StartSocket(): Starting on '224.0.0.1'
17:30:29.9121  2916@     walk_options(): VixsHAL: setting verbose output mode
17:30:29.9147  2916@     walk_options(): DVB-C FrontEnd: setting verbose output mode
17:30:29.9156  2916@     I2C_Init(): I2Clib: I2C system clock            = 25.000MHz
17:30:29.9163  2916@     I2C_Init(): I2Clib: I2C bus clock               = 400kHz
17:30:29.9169  2916@     I2C_Init(): I2Clib: I2C atomic period           = 62 sysclocks
17:30:29.9177  2916@     I2C_Init(): I2Clib: I2C bus timeout             = 700 sysclocks (11.3 i2cclocks)
17:30:29.9184  2916@     I2C_Init(): I2Clib: I2C read timeout            = 3000ms
17:30:29.9192  2916@     I2C_Init(): I2Clib: I2C write timeout           = 3000ms
17:30:29.9198  2916@     I2C_Init(): I2Clib: duration warning threshold  = 100000us
17:30:29.9205  2916@     DVBC_FE_FrontendInit(): [ZIM1902] Start init first MXL251 ...
17:30:29.9217  2915@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9224  2915@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9234  2917@     CEplThread::ThreadProc(): ***attaching thread 2917, EPL
17:30:29.9243  2917@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9250  2917@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9259  2918@     CEplThread::ThreadProc(): ***attaching thread 2918, EPL
17:30:29.9268  2918@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9275  2918@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9288  2914@     CEplIGMPTracker::StartSocket(): Starting on '224.0.0.22'
17:30:29.9305  2914@     CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:30:29.9323  2914@     CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:30:29.9520  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1...
17:30:30.3695  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:30.3702  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:30:30.3710  2916@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:30:30.3730  2916@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:30:31.1621  2914@     CESATIPServer::SetIdle(): waited long enough for frontend 1 (11)
17:30:31.1624  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1 done.
17:30:31.1721  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2...
17:30:32.1679  2916@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:30:32.3816  2914@     CESATIPServer::SetIdle(): waited long enough for frontend 2 (11)
17:30:32.3819  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2 done.
17:30:32.3916  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3...
17:30:33.6016  2914@     CESATIPServer::SetIdle(): waited long enough for frontend 3 (11)
17:30:33.6019  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3 done.
17:30:33.6116  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4...
17:30:34.1771  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:34.1778  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:30:34.2276  2916@     DVBC_FE_FrontendInit(): [ZIM1902] End init first MXL251
17:30:34.2282  2916@     DVBC_FE_FrontendInit(): [ZIM1902] Start init second MXL251 ...
17:30:34.3676  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:34.3684  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:30:34.3691  2916@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:30:34.3700  2916@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:30:34.8216  2914@     CESATIPServer::SetIdle(): waited long enough for frontend 4 (11)
17:30:34.8219  2914@     CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4 done.
17:30:34.8221  2914@     MyCESATIPServerClient::CESATIPServerClient_IdleMode(): server is idle. Going into low-power mode
17:30:34.8228  2919@     StandbyClock_thread_proc(): +++ StandbyClock_thread_proc(): Standby Clock Thread Started...
17:30:34.9320  2914@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.22' added to multicast list. size() is now 1
17:30:34.9325  2914@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.255.255.250' added to multicast list. size() is now 2
17:30:34.9329  2914@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.252' added to multicast list. size() is now 3
17:30:34.9333  2914@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.251' added to multicast list. size() is now 4
17:30:34.9337  2914@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.2' added to multicast list. size() is now 5
17:30:36.1653  2916@     dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:30:38.1718  2914@     CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.2.0.252' added to multicast list. size() is now 6
17:30:38.1782  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:38.1790  2916@     dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:30:38.2320  2916@     DVBC_FE_FrontendInit(): [ZIM1902] End init second MXL251
17:30:38.2641  2916@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2648  2916@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2706  2915@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2708  2915@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2784  2917@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2786  2917@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2885  2918@     CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2888  2918@     CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2916  2914@     StaticWorkerThreadEntry(): server initialized after 8360ms
Server initialized after 8360ms
17:30:38.2926  2914@     StaticWorkerThreadEntry(): # of DVB-C frontends:  4
17:30:38.2928  2914@     StaticWorkerThreadEntry(): # of DVB-T frontends:  0
17:30:38.2930  2914@     StaticWorkerThreadEntry(): # of DVB-T2 frontends: 0
17:30:38.2932  2914@     StaticWorkerThreadEntry(): # of DVB-S2 frontends: 0
Number of DVB-C frontends:  4
17:30:38.2944  2914@     CEDeviceHTTPServer::Start(): accepting connections
17:30:38.2952  2914@     CEDeviceHTTPServer::Start(): accepting connections
17:30:38.2956  2914@     StaticWorkerThreadEntry(): Server Name 'EyeTV Netstream 4C (2422)'
17:30:38.3045  2914@     CESATIPServer::SetDeviceID(): changing mDeviceID from 1 to 103
17:30:38.3217  2914@     StaticWorkerThreadEntry(): setting RTSP dump to 0 and HTTP dump to 0
17:30:44.9315  2919@     VixsDeviceStandby(): ##### VixsDeviceStandby(1) in #################################################
17:30:44.9319  2919@     VixsDeviceDebug(): g_IDLE_thread_alive    = 0, g_IDLE_thread_running   = 0
17:30:44.9321  2919@     VixsDeviceDebug(): g_IDLE_thread_started  = 0, g_IDLE_thread_stopped   = 0
17:30:44.9323  2919@     VixsDeviceDebug(): g_pTaskScheduler.empty = 0, g_pTaskScheduler->empty = 1, g_bTaskValid        = 0
17:30:44.9325  2919@     VixsDeviceDebug(): g_bInStandby           = 0, g_bStandbyPending       = 0
17:30:44.9327  2919@     VixsDeviceDebug(): g_bEnableIdleScan      = 0, g_bIdleScanPending      = 0, g_bMustAbortScan    = 0
17:30:44.9329  2919@     VixsDeviceDebug(): g_bIdleScanStarted     = 0, g_bIdleScanFinished     = 0, g_iIdleScanProgress = 0
17:30:44.9331  2919@     VixsDeviceDebug(): g_bIdleScanRunning     = 0, g_lIdleScanInterval     = 604800, default = 604800
17:30:44.9333  2919@     VixsDeviceDebug(): g_LastIdleScanStart    = [never] (-1)
17:30:44.9335  2919@     VixsDeviceDebug(): g_LastIdleScanFinish   = [never] (-1)
17:30:44.9338  2919@     VixsDeviceDebug(): g_LastIdleScanDuration = [undefined] (-1), Stations Found: 0
17:30:44.9340  2919@     VixsDeviceStandby(): ##### VixsDeviceStandby(1) out ################################################
17:31:01.1920  2914@     CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:31:01.1929  2914@     CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
TV adapter immediately visible in TVH.