Project

General

Profile

2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS

Added by Giuliano G 2 months ago

I have the TVHeadend Server (linuxserver/tvheadend:latest) running in my QNAP NAS in a container (docker) and I have two SAT IP Servers (two XORO SAT>IP Server 8100) in my network which receive the signals from Astra 19E and Hotbird 13E, respectively. Each SAT-IP Server "outputs" 8 Tuners.
The TVHeadend Server sees all 16 tuners (see photo attached). However, I can only find the channels from one of the two satellites (which are mapped on the associated 8 tuners; see photo attached).
Has someone already managed to configure TVHeadend Server in such a way that all channels from both satellites (Astra, Hotbird) can be found?


Replies (8)

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by saen acro 2 months ago

And how tuners are configured
Just 13E is enabled.

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by Giuliano G 2 months ago

In the screenshot I have enabled only the tuners of Hotbird, you are right.
I have created two networks (one network for Hotbird, enabled on the 8 tuners associated with Hotbird; one network for Astra, enabled on the 8 tuners associated with Astra).
Even if a force a rescan on the network for Astra, nothing happens...
Has someone managed to see channels from two SAT-IP servers with TVHeadend?

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by Giuliano G 2 months ago

Each SATIP Server is connected to a TRIAX OPTO QUATRO (see photo attached) and each OPTO QUATRO is connected with an LNB.
I also attach screenshot of my enabled tuners and networks in TVH Server.

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by saen acro 2 months ago

Attach some smaller pictures or use postimages.org

Is your network attached to tuner
Is sat>ip server configuration is correct?

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by Giuliano G 2 months ago

Do you mean smaller in terms of KB or in terms of extension on the screen?
Yes, both networks (Astra and Hotbird) are attached to the respective tuners (see photo attached).
SATIP Server configuration in TVHH is attached (I guess is correct). SATIP configuration in my two XORO SATIP Servers is also correct (I have tested it without TVHH).

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by saen acro 2 months ago

This is how your pictures look to others

It's time to learn how to crop images ;)

Sat>ip server is your case is XORO, so get on his interface not in TVH

Don't say, you use predefined frequencies to scan.

RE: 2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS - Added by Giuliano G 2 months ago

Thank you very much saen, now it works :)
I only followed your advice "Don't say, you use predefined frequencies to scan."

    (1-8/8)