[MANUAL] Building .DEB packages on clean Ubuntu or other Debian distros

Saen Acro

%{color:red}Manual debugging step by step%

There is a manual in WIKI with says there is a some needed packages dependency

https://tvheadend.org/projects/tvheadend/wiki/Building

Following this manual (from wiki) there is no chance to make any package

So here is how to solve this:

(Ubuntu 14.04LTS x86_64 used but possible to be used on newer, even "x86" version)

There is a lot of packages with need to install

First packages from wiki

sudo apt install build-essential git pkg-config libssl-dev bzip2 wget libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev libavresample-dev

so let see is this correct by running


./configure

and result is

{{collapse


/opt/tvheadend# ./configure
Checking support/features
  checking for cc execinfo.h ...                    ok
  checking for cc -mmmx ...                         ok
  checking for cc -msse2 ...                        ok
  checking for cc -Wunused-result ...               ok
  checking for cc getloadavg ...                    ok
  checking for cc atomic64 ...                      ok
  checking for cc atomic_time_t ...                 ok
  checking for cc bitops64 ...                      ok
  checking for cc lockowner ...                     ok
  checking for cc qsort_r ...                       ok
  checking for cc stime ...                         ok
  checking for cc gmtoff ...                        ok
  checking for cc recvmmsg ...                      ok
  checking for cc sendmmsg ...                      ok
  checking for cc libiconv ...                      fail
  checking for cc libdvben50221 ...                 fail
  checking for cc ifnames ...                       ok
  checking for py module gzip ...                   ok
  checking for pkg-config ...                       ok
  checking for xgettext ...                         fail
ERROR: no gettext binaries found

}}

surprise nothing happens

so we need package gettext

sudo apt install gettext

again configure command

{{collapse


/opt/tvheadend# ./configure
Checking support/features
  checking for cc execinfo.h ...                    ok
  checking for cc -mmmx ...                         ok
  checking for cc -msse2 ...                        ok
  checking for cc -Wunused-result ...               ok
  checking for cc getloadavg ...                    ok
  checking for cc atomic64 ...                      ok
  checking for cc atomic_time_t ...                 ok
  checking for cc bitops64 ...                      ok
  checking for cc lockowner ...                     ok
  checking for cc qsort_r ...                       ok
  checking for cc stime ...                         ok
  checking for cc gmtoff ...                        ok
  checking for cc recvmmsg ...                      ok
  checking for cc sendmmsg ...                      ok
  checking for cc libiconv ...                      fail
  checking for cc libdvben50221 ...                 fail
  checking for cc ifnames ...                       ok
  checking for py module gzip ...                   ok
  checking for pkg-config ...                       ok
  checking for xgettext ...                         ok
  checking for msgmerge ...                         ok
  checking for gzip ...                             ok
  checking for bzip2 ...                            ok
  checking for pkg openssl  ...                     ok (detected 1.0.1f)
  checking for cc linux/dvb/version.h ...           ok
  checking for pkg zlib  ...                        ok (detected 1.2.8)
  checking for pkg liburiparser  ...                fail (detected <none>)
  checking for pkg avahi-client  ...                ok (detected 0.6.31)
  checking for cmake ...                            fail
ERROR: cmake not found

}}

Again missing essential part


sudo apt install cmake

Again configure
{{collapse


/opt/tvheadend# ./configure
Checking support/features
  checking for cc execinfo.h ...                    ok
  checking for cc -mmmx ...                         ok
  checking for cc -msse2 ...                        ok
  checking for cc -Wunused-result ...               ok
  checking for cc getloadavg ...                    ok
  checking for cc atomic64 ...                      ok
  checking for cc atomic_time_t ...                 ok
  checking for cc bitops64 ...                      ok
  checking for cc lockowner ...                     ok
  checking for cc qsort_r ...                       ok
  checking for cc stime ...                         ok
  checking for cc gmtoff ...                        ok
  checking for cc recvmmsg ...                      ok
  checking for cc sendmmsg ...                      ok
  checking for cc libiconv ...                      fail
  checking for cc libdvben50221 ...                 fail
  checking for cc ifnames ...                       ok
  checking for py module gzip ...                   ok
  checking for pkg-config ...                       ok
  checking for xgettext ...                         ok
  checking for msgmerge ...                         ok
  checking for gzip ...                             ok
  checking for bzip2 ...                            ok
  checking for pkg openssl  ...                     ok (detected 1.0.1f)
  checking for cc linux/dvb/version.h ...           ok
  checking for pkg zlib  ...                        ok (detected 1.2.8)
  checking for pkg liburiparser  ...                fail (detected <none>)
  checking for pkg avahi-client  ...                ok (detected 0.6.31)
  checking for cmake ...                            ok
  checking for cc -lstdc++ ...                      ok
  checking for cc nvEncodeAPI.h ...                 fail
  checking for cc sys/inotify.h ...                 ok
  fetching dvb-scan files ...                       ok
  checking for pkg dbus-1  ...                      ok (detected 1.6.18)

Compiler:
  Using C compiler:                        cc
  Build for arch:                          x86_64

Binaries:
  Using PYTHON:                            python
  Using GZIP:                              gzip
  Using BZIP2:                             bzip2

Options:
  pie                                      yes
  ccdebug                                  no
  cwc                                      yes
  capmt                                    yes
  constcw                                  yes
  linuxdvb                                 yes
  satip_server                             yes
  satip_client                             yes
  hdhomerun_client                         yes
  hdhomerun_static                         yes
  iptv                                     yes
  tsfile                                   yes
  dvbscan                                  yes
  timeshift                                yes
  trace                                    yes
  imagecache                               yes
  avahi                                    yes
  zlib                                     yes
  libav                                    yes
  ffmpeg_static                            yes
  libx264                                  yes
  libx264_static                           yes
  libx265                                  yes
  libx265_static                           yes
  libvpx                                   yes
  libvpx_static                            yes
  libtheora                                yes
  libtheora_static                         yes
  libvorbis                                yes
  libvorbis_static                         yes
  libfdkaac                                yes
  libfdkaac_static                         yes
  nvenc                                    no
  qsv                                      no
  libmfx_static                            no
  inotify                                  yes
  epoll                                    yes
  uriparser                                no
  ccache                                   no
  tvhcsa                                   yes
  bundle                                   no
  dvbcsa                                   no
  dvben50221                               no
  kqueue                                   no
  dbus_1                                   yes
  android                                  no
  tsdebug                                  no
  gtimer_check                             no
  slow_memoryinfo                          no
  libsystemd_daemon                        no
  bintray_cache                            yes
  execinfo                                 yes
  mmx                                      yes
  sse2                                     yes
  W_unused_result                          yes
  getloadavg                               yes
  atomic64                                 yes
  atomic_time_t                            yes
  bitops64                                 yes
  lockowner                                yes
  qsort_r                                  yes
  stime                                    yes
  gmtoff                                   yes
  recvmmsg                                 yes
  sendmmsg                                 yes
  ifnames                                  yes
  py_gzip                                  yes
  bin_pkg_config                           yes
  bin_xgettext                             yes
  bin_msgmerge                             yes
  bin_gzip                                 yes
  bin_bzip2                                yes
  ssl                                      yes
  linuxdvbapi                              yes
  upnp                                     yes
  bin_cmake                                yes
  stdcpp                                   yes
  libogg_static                            yes
  inotify_h                                yes
  mpegts                                   yes
  mpegts_dvb                               yes

Packages:
  openssl                                  1.0.1f
  zlib                                     1.2.8
  avahi-client                             0.6.31
  dbus-1                                   1.6.18

Installation paths:
  Prefix:                                  /usr/local
  Binaries:                                ${prefix}/bin
  Libraries:                               ${prefix}/lib
  Data files:                              ${prefix}/share
  Man pages:                               ${datadir}/man

Final Binary:
  /opt/tvheadend/build.linux/tvheadend

Tvheadend Data Directory:
  /usr/local/share/tvheadend

}}

And success, there is a chance to build .DEB, but is it so simple are we miss some?


  checking for cc libiconv ...                      fail
  checking for cc libdvben50221 ...                 fail
  checking for pkg liburiparser  ...                fail (detected <none>)

those maby not 100% needed but lets install it:

----

libiconv there is some strange with this library in newer version it is build in in in other library


sudo apt install libiconv-hook-dev

/// this will not solve dependency error message, maby error in configure script

----

libdvben50221 this is DVB-CI support for hardware CAM module on some devices
solved by instaling dvb-apps

sudo apt install dvb-apps

----

liburiparser

sudo apt install liburiparser-dev

Let's see with configure
{{collapse


/opt/tvheadend# ./configure
Checking support/features
  checking for cc execinfo.h ...                    ok
  checking for cc -mmmx ...                         ok
  checking for cc -msse2 ...                        ok
  checking for cc -Wunused-result ...               ok
  checking for cc getloadavg ...                    ok
  checking for cc atomic64 ...                      ok
  checking for cc atomic_time_t ...                 ok
  checking for cc bitops64 ...                      ok
  checking for cc lockowner ...                     ok
  checking for cc qsort_r ...                       ok
  checking for cc stime ...                         ok
  checking for cc gmtoff ...                        ok
  checking for cc recvmmsg ...                      ok
  checking for cc sendmmsg ...                      ok
  checking for cc libiconv ...                      fail
  checking for cc libdvben50221 ...                 ok
  checking for cc ifnames ...                       ok
  checking for py module gzip ...                   ok
  checking for pkg-config ...                       ok
  checking for xgettext ...                         ok
  checking for msgmerge ...                         ok
  checking for gzip ...                             ok
  checking for bzip2 ...                            ok
  checking for pkg openssl  ...                     ok (detected 1.0.1f)
  checking for cc linux/dvb/version.h ...           ok
  checking for pkg zlib  ...                        ok (detected 1.2.8)
  checking for pkg liburiparser  ...                ok (detected 0.7.5)
  checking for pkg avahi-client  ...                ok (detected 0.6.31)
  checking for cmake ...                            ok
  checking for cc -lstdc++ ...                      ok
  checking for cc nvEncodeAPI.h ...                 fail
  checking for cc sys/inotify.h ...                 ok
  fetching dvb-scan files ...                       ok
  checking for pkg dbus-1  ...                      ok (detected 1.6.18)

Compiler:
  Using C compiler:                        cc
  Using LD flags:                           -ldvben50221 -ldvbapi -lucsi
  Build for arch:                          x86_64

Binaries:
  Using PYTHON:                            python
  Using GZIP:                              gzip
  Using BZIP2:                             bzip2

Options:
  pie                                      yes
  ccdebug                                  no
  cwc                                      yes
  capmt                                    yes
  constcw                                  yes
  linuxdvb                                 yes
  satip_server                             yes
  satip_client                             yes
  hdhomerun_client                         yes
  hdhomerun_static                         yes
  iptv                                     yes
  tsfile                                   yes
  dvbscan                                  yes
  timeshift                                yes
  trace                                    yes
  imagecache                               yes
  avahi                                    yes
  zlib                                     yes
  libav                                    yes
  ffmpeg_static                            yes
  libx264                                  yes
  libx264_static                           yes
  libx265                                  yes
  libx265_static                           yes
  libvpx                                   yes
  libvpx_static                            yes
  libtheora                                yes
  libtheora_static                         yes
  libvorbis                                yes
  libvorbis_static                         yes
  libfdkaac                                yes
  libfdkaac_static                         yes
  nvenc                                    no
  qsv                                      no
  libmfx_static                            no
  inotify                                  yes
  epoll                                    yes
  uriparser                                yes
  ccache                                   no
  tvhcsa                                   yes
  bundle                                   no
  dvbcsa                                   no
  dvben50221                               yes
  kqueue                                   no
  dbus_1                                   yes
  android                                  no
  tsdebug                                  no
  gtimer_check                             no
  slow_memoryinfo                          no
  libsystemd_daemon                        no
  bintray_cache                            yes
  execinfo                                 yes
  mmx                                      yes
  sse2                                     yes
  W_unused_result                          yes
  getloadavg                               yes
  atomic64                                 yes
  atomic_time_t                            yes
  bitops64                                 yes
  lockowner                                yes
  qsort_r                                  yes
  stime                                    yes
  gmtoff                                   yes
  recvmmsg                                 yes
  sendmmsg                                 yes
  libdvben50221                            yes
  ifnames                                  yes
  py_gzip                                  yes
  bin_pkg_config                           yes
  bin_xgettext                             yes
  bin_msgmerge                             yes
  bin_gzip                                 yes
  bin_bzip2                                yes
  ssl                                      yes
  linuxdvbapi                              yes
  upnp                                     yes
  bin_cmake                                yes
  stdcpp                                   yes
  libogg_static                            yes
  inotify_h                                yes
  linuxdvb_ca                              yes
  mpegts                                   yes
  mpegts_dvb                               yes

Packages:
  openssl                                  1.0.1f
  zlib                                     1.2.8
  liburiparser                             0.7.5
  avahi-client                             0.6.31
  dbus-1                                   1.6.18

Installation paths:
  Prefix:                                  /usr/local
  Binaries:                                ${prefix}/bin
  Libraries:                               ${prefix}/lib
  Data files:                              ${prefix}/share
  Man pages:                               ${datadir}/man

Final Binary:
  /opt/tvheadend/build.linux/tvheadend

Tvheadend Data Directory:
  /usr/local/share/tvheadend

}}

Some will ask about


  checking for cc nvEncodeAPI.h ...                 fail

this is NVENC (nVidia hardware accelerator for transcoding)

I don't use nVidia can't help, there is a separate topic

So let's continue with bulding of .DEB packages.

Next step is to use Autobuild.sh, with will make all automatically. or not.

{{collapse


/opt/tvheadend# ./Autobuild.sh
dpkg-buildpackage: пакет източник tvheadend
dpkg-buildpackage: source version 4.1-2398~gc38af4c
dpkg-buildpackage: source distribution unstable
dpkg-buildpackage: source changed by Andreas Öman <andreas@tvheadend.org>
dpkg-buildpackage: host architecture amd64
 dpkg-source --before-build tvheadend
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 7.0.50) libcurl4-gnutls-dev
dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
dpkg-buildpackage: warning: (Use -d flag to override.)

}}
Again something missing


sudo apt install debhelper libcurl4-gnutls-dev

Crossing fingers an run againAutobuild.sh

If everything is OK,

compilation of FFMPEG X264/5 OGG AAC and some other codecs will be compiled before TVHeadend and finally .DEB files.

If there is no critical errors at the end there is show something as this


dpkg-buildpackage: binary only upload (no source included)
doozer-versioned-artifact:/opt/tvheadend/../tvheadend_4.1-2398~gc38af4c_amd64.deb:deb:application/x-deb:tvheadend_4.1-2398~gc38af4c_amd64.deb
doozer-versioned-artifact:/opt/tvheadend/../tvheadend-dbg_4.1-2398~gc38af4c_amd64.deb:deb:application/x-deb:tvheadend-dbg_4.1-2398~gc38af4c_amd64.deb
doozer-versioned-artifact:/opt/tvheadend/../tvheadend_4.1-2398~gc38af4c_amd64.changes:changes:text/plain:tvheadend_4.1-2398~gc38af4c_amd64.changes


/opt/tvheadend/../

this mean that I'm using/opt/tvheadend/ (source from git)
and files are generated in../ (upper level) in this case/opt installation can be done by command

sudo dpkg -i tvheadend_4.1-2398~gc38af4c_amd64.deb

----

=====
Edit new dependency libpcre /Perl 5 Compatible Regular Expression Library/
to install it add


Sudo apt instal libpcre2-dev

Warning library is not accessible to all OS versions then uselibpcre3-dev

----

%{color:red}GPU VA hardware acceleration aka Transcoding%


  checking for pkg libva >=0.38.0 ...               ok (detected 0.39.0)
  checking for pkg libva-x11 >=0.38.0 ...           ok (detected 0.39.0)
  checking for pkg libva-drm >=0.38.0 ...           ok (detected 0.39.0)

libva-dev libva-drm1 (libva-drm2) libva-x11-1 (libva-x11-1) i965-va-driver-shaders (Latest Debian probably Ubuntu 20.04 for Intel GPU)

to work hardware need to support VA-API version minimum 0.39.0
ex.
{{collapse


i5-4440 - HD4600
# vainfo
error: XDG_RUNTIME_DIR not set in the environment.
error: can't connect to X server!
libva info: VA-API version 0.39.0   <<<<<<<<<<<<<<<<<<<<<<<<<<<
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.39 (libva 1.7.0)
vainfo: Driver version: Intel i965 driver for Intel(R) Haswell Desktop - 1.7.0
vainfo: Supported profile and entrypoints
      VAProfileMPEG2Simple            : VAEntrypointVLD
      VAProfileMPEG2Simple            : VAEntrypointEncSlice
      VAProfileMPEG2Main              : VAEntrypointVLD
      VAProfileMPEG2Main              : VAEntrypointEncSlice
      VAProfileH264ConstrainedBaseline: VAEntrypointVLD
      VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
      VAProfileH264Main               : VAEntrypointVLD
      VAProfileH264Main               : VAEntrypointEncSlice
      VAProfileH264High               : VAEntrypointVLD
      VAProfileH264High               : VAEntrypointEncSlice
      VAProfileH264MultiviewHigh      : VAEntrypointVLD
      VAProfileH264MultiviewHigh      : VAEntrypointEncSlice
      VAProfileH264StereoHigh         : VAEntrypointVLD
      VAProfileH264StereoHigh         : VAEntrypointEncSlice
      VAProfileVC1Simple              : VAEntrypointVLD
      VAProfileVC1Main                : VAEntrypointVLD
      VAProfileVC1Advanced            : VAEntrypointVLD
      VAProfileNone                   : VAEntrypointVideoProc
      VAProfileJPEGBaseline           : VAEntrypointVLD

}}

there is a situation when Intel drivers are very buggy but work also
ex:
{{collapse


Intel Corporation Atom Processor D410 - IGMA3510

#vainfo
error: XDG_RUNTIME_DIR not set in the environment.
error: can't connect to X server!
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/i386-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva error: /usr/lib/i386-linux-gnu/dri/i965_drv_video.so init failed
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit

}}

----

%{color:red}Short version of all needed packages%

sudo apt install build-essential git ccache libpcre2-dev pkg-config libssl-dev bzip2 \ wget libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev \ libswscale-dev libavresample-dev gettext cmake libiconv-hook-dev liburiparser-dev \ debhelper libcurl4-gnutls-dev python-minimal libdvbcsa-dev python-requests

Iflibpcre2-dev not found uselibpcre3-dev

Optional packages for optional features ;)


sudo apt install dvb-apps libva-dev libva-drm1 libva-x11-1

If used Ubuntu 18.04+libva-drm2 libva-x11-2

To enable SYSTEMD service--enable-libsystemd_daemon on Ubuntu 18.04 and upper, installlibsystemd-dev

Keep in mind, this will install ~400+Mb packages. Some packages will install other packages to satisfy its dependencies

----

%{color:red}How to clone Github repo to local folder%

Usually regular command to clone repo is


git clone https://github.com/tvheadend/tvheadend.git

This will download latest source code (unstable) ready for compilation
but if need stable or other
use command


git clone -b release/4.2 https://github.com/tvheadend/tvheadend.git

command explained


git clone -b <branch> <remote_repo>

branch list can be seen at https://github.com/tvheadend/tvheadend

----

%{color:red}ARM OpenMax support%

Use only on ARM boards


apt install libomxil-bellagio-dev

do not forget to add option

--enable-omx

----

%(color:red)Python%

Autobuild script search forpython but it was replaced bypython3 solution:


--python=/usr/bin/python3

----

%{color:red}Automated build script%

Currently just clone only latest repo source code and compile it


#!/bin/bash

BASE=$(dirname "$0")
(
  if [ -d "$BASE/tvheadend" ]; then
    cd "$BASE/tvheadend"
    git pull
  else
    cd "$BASE"
    git clone https://github.com/tvheadend/tvheadend.git tvheadend # --depth=5 (need version tag workaround else 0.0.0 version)
    cd "$BASE/tvheadend"
  fi
  time AUTOBUILD_CONFIGURE_EXTRA="--disable-bintray_cache --enable-vaapi --enable-nvenc --disable-hdhomerun_client --disable-hdhomerun_static " ./Autobuild.sh -j$(nproc) # edit only betwin "quotation marks"
) | tee "$BASE/build.log"

Use command


./configure --help

to see possible options.

{{collapse


Usage: ./configure [options]

Miscellaneous
  --help                         Print this message

Installation Paths
  --prefix=DIR$                  Installation root [/usr/local]
  --bindir=DIR                   Install binaries in DIR [${prefix}/bin]
  --libdir=DIR                   Install libraries in DIR [${prefix}/lib]
  --mandir=DIR                   Install man pages in DIR [${datadir}/man]
  --datadir=DIR                  Install data files in DIR [${prefix}/share]

Compiler/Arch
  --cc=CC                        Build using compiler [cc]
  --cflags=CFLAGS                Build using C flags
  --ldflags=LDFLAGS              Build using LD flags
  --cpu=CPU                      Build and optimize for specific CPU
  --arch=ARCH                    Build for architecture [x86_64]
  --platform=PLATFORM            Build for platform [linux]
  --nowerror                     Build without -Werror CFLAGS
  --python=PYTHON                Use python binary [python]

Options
  --disable-pie                  Disable pie
  --enable-ccdebug               Enable ccdebug
  --disable-cardclient           Disable cardclient
  --enable-cardclient            Enable cardclient
  --disable-cwc                  Disable cwc
  --disable-cccam                Disable cccam
  --disable-capmt                Disable capmt
  --disable-constcw              Disable constcw
  --disable-linuxdvb             Disable linuxdvb
  --disable-satip_server         Disable satip_server
  --disable-satip_client         Disable satip_client
  --enable-hdhomerun_client      Enable hdhomerun_client
  --disable-hdhomerun_static     Disable hdhomerun_static
  --disable-iptv                 Disable iptv
  --disable-tsfile               Disable tsfile
  --disable-dvbscan              Disable dvbscan
  --disable-timeshift            Disable timeshift
  --disable-trace                Disable trace
  --disable-avahi                Disable avahi
  --enable-avahi                 Enable avahi
  --disable-zlib                 Disable zlib
  --enable-zlib                  Enable zlib
  --disable-libav                Disable libav
  --enable-libav                 Enable libav
  --disable-ffmpeg_static        Disable ffmpeg_static
  --disable-libx264              Disable libx264
  --disable-libx264_static       Disable libx264_static
  --disable-libx265              Disable libx265
  --disable-libx265_static       Disable libx265_static
  --disable-libvpx               Disable libvpx
  --disable-libvpx_static        Disable libvpx_static
  --disable-libtheora            Disable libtheora
  --disable-libtheora_static     Disable libtheora_static
  --disable-libvorbis            Disable libvorbis
  --disable-libvorbis_static     Disable libvorbis_static
  --enable-libfdkaac             Enable libfdkaac
  --disable-libfdkaac_static     Disable libfdkaac_static
  --disable-libopus              Disable libopus
  --disable-libopus_static       Disable libopus_static
  --enable-nvenc                 Enable nvenc
  --disable-vaapi                Disable vaapi
  --enable-vaapi                 Enable vaapi
  --enable-mmal                  Enable mmal
  --enable-omx                   Enable omx
  --disable-inotify              Disable inotify
  --enable-inotify               Enable inotify
  --disable-epoll                Disable epoll
  --enable-epoll                 Enable epoll
  --disable-pcre                 Disable pcre
  --enable-pcre                  Enable pcre
  --disable-pcre2                Disable pcre2
  --enable-pcre2                 Enable pcre2
  --disable-uriparser            Disable uriparser
  --enable-uriparser             Enable uriparser
  --disable-ccache               Disable ccache
  --enable-ccache                Enable ccache
  --disable-tvhcsa               Disable tvhcsa
  --enable-tvhcsa                Enable tvhcsa
  --enable-bundle                Enable bundle
  --enable-pngquant              Enable pngquant
  --enable-kqueue                Enable kqueue
  --disable-dbus_1               Disable dbus_1
  --enable-dbus_1                Enable dbus_1
  --enable-android               Enable android
  --enable-gtimer_check          Enable gtimer_check
  --enable-slow_memoryinfo       Enable slow_memoryinfo
  --enable-libsystemd_daemon     Enable libsystemd_daemon
  --disable-pcloud_cache         Disable pcloud_cache
  --disable-ddci                 Disable ddci
  --enable-cclang_threadsan      Enable cclang_threadsan
  --enable-gperftools            Enable gperftools

}}

Detlev Hoffmann

Thanks a lot.

That helped me building and installing it on Ubuntu 16.10 server on my ASRock J3455-ITX.
One item i had to add:

sudo apt-get install curl

before the autobuild.sh run.

Saen Acro

I'm glad to help you

topic need to be pinned on top

Njuskalo Njusko

Perfect ! Thanks a lot !

Bapak Ireng

Perfect ! Five Stars Manual to be able to compile on DEBIAN 9 as well!

Giuseppe Sicilia

Thanks a lot. Very nice. This should be added in wiki...(/)

Saen Acro

Addedpython-minimal

is anyone can found dependences of


checking for cc cclang_threadsan ...              fail

Wesley Rodrigues

What is login and password?

Saen Acro

Wesley Rodrigues wrote:

> What is login and password?

during install will be ask to set credentials

Saen Acro

added dependencypython-requests

if during install get message about


systemctl: error while loading shared libraries: libjson-c.so.3: cannot open shared object file: No such file or directory

it mean that libjson-c2 / libjson-c3 is not installed.

andrei tanasescu

hi,

I am trying to compile on a raspberry pi 3B+ (@raspbian stretch@, with

kernel 4.14.98@) with transcoding using:

AUTOBUILD_CONFIGURE_EXTRA=--disable-libvpx\ --disable-libx265\ --disable-libtheora\ --disable-libvorbis\ --disable-hdhomerun_client\ --disable-hdhomerun_static\ --disable-bintray_cache\ --enable-libffmpeg_static\ --enable-omx\ --enable-mmal\ --disable-libopus ./Autobuild.sh

tried adding new *.conf under @/etc/ld.so.conf.d/

that contained

/opt/vc/lib@, ran @sudo ldconfig

and tried compiling again, but still the same error.

any suggestions greatly appreciated!

compile fails with the following:

Markdown: docs/wizard/status.md CC src/docs.o CC build.o CC timestamp.o CC tvheadend /usr/bin/ld: cannot find -lmmal_core /usr/bin/ld: cannot find -lmmal_util /usr/bin/ld: cannot find -lmmal_vc_client /usr/bin/ld: cannot find -lbcm_host collect2: error: ld returned 1 exit status Makefile:709: recipe for target '/home/pi/app_sources/tvheadend/build.linux/tvheadend' failed make[3]: *** [/home/pi/app_sources/tvheadend/build.linux/tvheadend] Error 1 make[3]: Leaving directory '/home/pi/app_sources/tvheadend' Makefile:107: recipe for target 'ffmpeg_all' failed make[2]: *** [ffmpeg_all] Error 2 make[2]: Leaving directory '/home/pi/app_sources/tvheadend' debian/rules:15: recipe for target 'override_dh_auto_build' failed make[1]: *** [override_dh_auto_build] Error 2 make[1]: Leaving directory '/home/pi/app_sources/tvheadend' debian/rules:6: recipe for target 'build' failed make: *** [build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2

libraries exist:

ls -l /opt/vc/lib/ | grep mmal -rw-r--r-- 1 root root 68884 Apr 3 23:54 libmmal_components.so -rw-r--r-- 1 root root 82168 Apr 3 23:54 libmmal_core.so -rw-r--r-- 1 root root 15368 Apr 3 23:54 libmmal.so -rw-r--r-- 1 root root 91040 Apr 3 23:54 libmmal_util.so -rw-r--r-- 1 root root 44424 Apr 3 23:54 libmmal_vc_client.so ls -l /opt/vc/lib/ | grep bcm -rw-r--r-- 1 root root 99516 Apr 3 23:54 libbcm_host.so

ld doesn't seem to look in /opt/vc/lib

ld -lmmal_core --verbose:

GNU ld (GNU Binutils for Raspbian) 2.28
  Supported emulations:
   armelf_linux_eabi
   armelfb_linux_eabi
using internal linker script:
==================================================
/* Script for -z combreloc: combine and sort reloc sections */
/* Copyright (C) 2014-2017 Free Software Foundation, Inc.
   Copying and distribution of this script, with or without modification,
   are permitted in any medium without royalty provided the copyright
   notice and this notice are preserved.  */
OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
	      "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SEARCH_DIR("=/usr/local/lib/arm-linux-gnueabihf"); SEARCH_DIR("=/lib/arm-linux-gnueabihf"); SEARCH_DIR("=/usr/lib/arm-linux-gnueabihf"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib"); SEARCH_DIR("=/usr/arm-linux-gnueabihf/lib");
SECTIONS
{
  /* Read-only sections, merged into text segment: */
  PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x00010000)); . = SEGMENT_START("text-segment", 0x00010000) + SIZEOF_HEADERS;
  .interp         : { *(.interp) }
  .note.gnu.build-id : { *(.note.gnu.build-id) }
  .hash           : { *(.hash) }
  .gnu.hash       : { *(.gnu.hash) }
  .dynsym         : { *(.dynsym) }
  .dynstr         : { *(.dynstr) }
  .gnu.version    : { *(.gnu.version) }
  .gnu.version_d  : { *(.gnu.version_d) }
  .gnu.version_r  : { *(.gnu.version_r) }
  .rel.dyn        :
    {
      *(.rel.init)
      *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*)
      *(.rel.fini)
      *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*)
      *(.rel.data.rel.ro .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*)
      *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*)
      *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*)
      *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*)
      *(.rel.ctors)
      *(.rel.dtors)
      *(.rel.got)
      *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*)
      PROVIDE_HIDDEN (__rel_iplt_start = .);
      *(.rel.iplt)
      PROVIDE_HIDDEN (__rel_iplt_end = .);
    }
  .rela.dyn       :
    {
      *(.rela.init)
      *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*)
      *(.rela.fini)
      *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*)
      *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*)
      *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*)
      *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*)
      *(.rela.ctors)
      *(.rela.dtors)
      *(.rela.got)
      *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*)
      PROVIDE_HIDDEN (__rela_iplt_start = .);
      *(.rela.iplt)
      PROVIDE_HIDDEN (__rela_iplt_end = .);
    }
  .rel.plt        :
    {
      *(.rel.plt)
    }
  .rela.plt       :
    {
      *(.rela.plt)
    }
  .init           :
  {
    KEEP (*(SORT_NONE(.init)))
  }
  .plt            : { *(.plt) }
  .iplt           : { *(.iplt) }
  .text           :
  {
    *(.text.unlikely .text.*_unlikely .text.unlikely.*)
    *(.text.exit .text.exit.*)
    *(.text.startup .text.startup.*)
    *(.text.hot .text.hot.*)
    *(.text .stub .text.* .gnu.linkonce.t.*)
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    *(.glue_7t) *(.glue_7) *(.vfp11_veneer) *(.v4_bx)
  }
  .fini           :
  {
    KEEP (*(SORT_NONE(.fini)))
  }
  PROVIDE (__etext = .);
  PROVIDE (_etext = .);
  PROVIDE (etext = .);
  .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
  .rodata1        : { *(.rodata1) }
  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) }
   PROVIDE_HIDDEN (__exidx_start = .);
  .ARM.exidx   : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) }
   PROVIDE_HIDDEN (__exidx_end = .);
  .eh_frame_hdr : { *(.eh_frame_hdr) *(.eh_frame_entry .eh_frame_entry.*) }
  .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) *(.eh_frame.*) }
  .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table
  .gcc_except_table.*) }
  .gnu_extab   : ONLY_IF_RO { *(.gnu_extab*) }
  /* These sections are generated by the Sun/Oracle C++ compiler.  */
  .exception_ranges   : ONLY_IF_RO { *(.exception_ranges
  .exception_ranges*) }
  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE));
  /* Exception handling  */
  .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) *(.eh_frame.*) }
  .gnu_extab      : ONLY_IF_RW { *(.gnu_extab) }
  .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
  .exception_ranges   : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
  /* Thread Local Storage sections  */
  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
  .preinit_array     :
  {
    PROVIDE_HIDDEN (__preinit_array_start = .);
    KEEP (*(.preinit_array))
    PROVIDE_HIDDEN (__preinit_array_end = .);
  }
  .init_array     :
  {
    PROVIDE_HIDDEN (__init_array_start = .);
    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
    PROVIDE_HIDDEN (__init_array_end = .);
  }
  .fini_array     :
  {
    PROVIDE_HIDDEN (__fini_array_start = .);
    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
    PROVIDE_HIDDEN (__fini_array_end = .);
  }
  .ctors          :
  {
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */
    KEEP (*crtbegin.o(.ctors))
    KEEP (*crtbegin?.o(.ctors))
    /* We don't want to include the .ctor section from
       the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
  }
  .dtors          :
  {
    KEEP (*crtbegin.o(.dtors))
    KEEP (*crtbegin?.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
  }
  .jcr            : { KEEP (*(.jcr)) }
  .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }
  .dynamic        : { *(.dynamic) }
  . = DATA_SEGMENT_RELRO_END (0, .);
  .got            : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }
  .data           :
  {
    PROVIDE (__data_start = .);
    *(.data .data.* .gnu.linkonce.d.*)
    SORT(CONSTRUCTORS)
  }
  .data1          : { *(.data1) }
  _edata = .; PROVIDE (edata = .);
  . = .;
  __bss_start = .;
  __bss_start__ = .;
  .bss            :
  {
   *(.dynbss)
   *(.bss .bss.* .gnu.linkonce.b.*)
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.
      FIXME: Why do we need it? When there is no .bss section, we don't
      pad the .data section.  */
   . = ALIGN(. != 0 ? 32 / 8 : 1);
  }
  _bss_end__ = . ; __bss_end__ = . ;
  . = ALIGN(32 / 8);
  . = SEGMENT_START("ldata-segment", .);
  . = ALIGN(32 / 8);
  __end__ = . ;
  _end = .; PROVIDE (end = .);
  . = DATA_SEGMENT_END (.);
  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .comment       0 : { *(.comment) }
  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */
  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }
  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line .debug_line.* .debug_line_end ) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }
  /* DWARF 3 */
  .debug_pubtypes 0 : { *(.debug_pubtypes) }
  .debug_ranges   0 : { *(.debug_ranges) }
  /* DWARF Extension.  */
  .debug_macro    0 : { *(.debug_macro) }
  .debug_addr     0 : { *(.debug_addr) }
  .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
  .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
  /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }
}


==================================================
attempt to open //usr/local/lib/arm-linux-gnueabihf/libmmal_core.so failed
attempt to open //usr/local/lib/arm-linux-gnueabihf/libmmal_core.a failed
attempt to open //lib/arm-linux-gnueabihf/libmmal_core.so failed
attempt to open //lib/arm-linux-gnueabihf/libmmal_core.a failed
attempt to open //usr/lib/arm-linux-gnueabihf/libmmal_core.so failed
attempt to open //usr/lib/arm-linux-gnueabihf/libmmal_core.a failed
attempt to open //usr/local/lib/libmmal_core.so failed
attempt to open //usr/local/lib/libmmal_core.a failed
attempt to open //lib/libmmal_core.so failed
attempt to open //lib/libmmal_core.a failed
attempt to open //usr/lib/libmmal_core.so failed
attempt to open //usr/lib/libmmal_core.a failed
attempt to open //usr/arm-linux-gnueabihf/lib/libmmal_core.so failed
attempt to open //usr/arm-linux-gnueabihf/lib/libmmal_core.a failed
ld: cannot find -lmmal_core

contents of @/etc/ld.so.conf@:

include /etc/ld.so.conf.d/*.conf

contents of @/etc/ld.so.conf.d@:

/etc/ld.so.conf.d/00-vmcs.conf /etc/ld.so.conf.d/arm-linux-gnueabihf.conf /etc/ld.so.conf.d/fakeroot-arm-linux-gnueabihf.conf /etc/ld.so.conf.d/libc.conf

contents of @/etc/ld.so.conf.d/00-vmcs.conf@:


/opt/vc/lib

Saen Acro


/usr/bin/ld: cannot find -lbcm_host

is Broadcom stuff missing,

are you crosscompile or make it on dev board itself?

andrei tanasescu

compiling on the dev board itself.

the

bcm_host

exists under the same location as the mmal libs:

ls -l /opt/vc/lib/ | grep bcm
-rw-r--r-- 1 root root  99516 Apr  3 23:54 libbcm_host.so

Saen Acro


AUTOBUILD_CONFIGURE_EXTRA='--prefix=/usr --includedir=${prefix}/include \
--mandir=${prefix}/share/man \
--infodir=${prefix}/share/info \
--sysconfdir=/etc --localstatedir=/var \
--disable-silent-rules --libexecdir=${prefix}/lib/tvheadend \
--disable-maintainer-mode \
--disable-dependency-tracking \
--enable-libffmpeg_static --enable-hdhomerun_static \
--enable-dvbcsa --enable-bundle' ./Autobuild.sh

is this work

andrei tanasescu

saen acro wrote:
> [...]

> is this work

it fails when compilinglibopus, but I don't use/need it. I only need x264 transcoding, hence the

--enable-mmal

and

--enable-omx

and all other codecs disabled in my auto build config.


CC              src/transcoding/codec/codecs/libs/libopus.o
src/transcoding/codec/codecs/libs/libopus.c:23:31: fatal error: opus/opus_defines.h: No such file or directory
 #include <opus/opus_defines.h>
                               ^
compilation terminated.
Makefile:713: recipe for target '/home/pi/app_sources/tvheadend/build.linux/src/transcoding/codec/codecs/libs/libopus.o' failed
make[2]: *** [/home/pi/app_sources/tvheadend/build.linux/src/transcoding/codec/codecs/libs/libopus.o] Error 1
make[2]: Leaving directory '/home/pi/app_sources/tvheadend'
debian/rules:15: recipe for target 'override_dh_auto_build' failed
make[1]: *** [override_dh_auto_build] Error 2
make[1]: Leaving directory '/home/pi/app_sources/tvheadend'
debian/rules:6: recipe for target 'build' failed
make: *** [build] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2

Saen Acro

Post result of


./configure

andrei tanasescu


./configure --disable-libvpx --disable-libx265 --disable-libtheora --disable-libvorbis --disable-hdhomerun_client --disable-hdhomerun_static --disable-bintray_cache --enable-libffmpeg_static --enable-omx --enable-mmal --disable-libopus
Checking support/features
  checking for cc execinfo.h ...                    ok
  checking for cc -mmmx ...                         fail
  checking for cc -msse2 ...                        fail
  checking for cc -Wunused-result ...               ok
  checking for cc -fstack-protector ...             ok
  checking for cc -fstack-protector-strong ...      ok
  checking for cc -fstack-check ...                 ok
  checking for cc -fPIE ...                         ok
  checking for cc strlcat ...                       fail
  checking for cc strlcpy ...                       fail
  checking for cc fdatasync ...                     ok
  checking for cc getloadavg ...                    ok
  checking for cc atomic32 ...                      ok
  checking for cc atomic64 ...                      ok
  checking for cc atomic_time_t ...                 ok
  checking for cc atomic_ptr ...                    ok
  checking for cc bitops64 ...                      ok
  checking for cc lockowner ...                     ok
  checking for cc qsort_r ...                       ok
  checking for cc stime ...                         ok
  checking for cc gmtoff ...                        ok
  checking for cc recvmmsg ...                      ok
  checking for cc sendmmsg ...                      ok
  checking for cc libiconv ...                      fail
    ^ using build-in glibc iconv routines
  checking for cc ifnames ...                       ok
  checking for cc cclang_threadsan ...              fail
  checking for py module gzip ...                   ok
  checking for pkg-config ...                       ok
  checking for xgettext ...                         ok
  checking for msgmerge ...                         ok
  checking for gzip ...                             ok
  checking for bzip2 ...                            ok
  checking for pkg openssl  ...                     ok (detected 1.1.0j)
  checking for cc linux/dvb/version.h ...           ok
  checking for pkg zlib  ...                        ok (detected 1.2.8)
  checking for pkg libpcre2-8  ...                  ok (detected 10.22)
  checking for pkg liburiparser  ...                ok (detected 0.8.4)
  checking for pkg avahi-client  ...                ok (detected 0.6.32)
  checking for cc bcm_host.h ...                    ok
  checking for cc OMX_Core.h ...                    ok
  checking for pkg libva >=0.38.0 ...               ok (detected 0.39.4)
  checking for pkg libva-x11 >=0.38.0 ...           ok (detected 0.39.4)
  checking for pkg libva-drm >=0.38.0 ...           ok (detected 0.39.4)
  checking for cc sys/inotify.h ...                 ok
  checking for cc inotify_init1 ...                 ok
  checking for cc dvbcsa/dvbcsa.h ...               ok
  checking for cc -ldvbcsa ...                      ok
  fetching dvb-scan files ...                       ok
  checking for cc epoll_create1 ...                 ok
  checking for pkg dbus-1  ...                      ok (detected 1.10.26)

Compiler:
  Using C compiler:                        cc
  Using C flags:                           -I/opt/vc/include/IL 
  Using LD flags:                           -ldvbcsa
  Build for arch:                          arm

Binaries:
  Using PYTHON:                            python
  Using GZIP:                              gzip
  Using BZIP2:                             bzip2

Options:
  pie                                      yes
  ccdebug                                  no
  cardclient                               yes
  cwc                                      yes
  cccam                                    yes
  capmt                                    yes
  constcw                                  yes
  linuxdvb                                 yes
  satip_server                             yes
  satip_client                             yes
  hdhomerun_client                         no
  hdhomerun_static                         no
  iptv                                     yes
  tsfile                                   yes
  dvbscan                                  yes
  timeshift                                yes
  trace                                    yes
  avahi                                    yes
  zlib                                     yes
  libav                                    yes
  ffmpeg_static                            yes
  libx264                                  yes
  libx264_static                           yes
  libx265                                  no
  libx265_static                           no
  libvpx                                   no
  libvpx_static                            no
  libtheora                                no
  libtheora_static                         no
  libvorbis                                no
  libvorbis_static                         no
  libfdkaac                                no
  libfdkaac_static                         no
  libopus                                  no
  libopus_static                           no
  nvenc                                    no
  vaapi                                    yes
  mmal                                     yes
  omx                                      yes
  inotify                                  yes
  epoll                                    yes
  pcre                                     no
  pcre2                                    yes
  uriparser                                yes
  ccache                                   no
  tvhcsa                                   yes
  bundle                                   no
  pngquant                                 no
  kqueue                                   no
  dbus_1                                   yes
  android                                  no
  gtimer_check                             no
  slow_memoryinfo                          no
  libsystemd_daemon                        no
  pcloud_cache                             yes
  ddci                                     yes
  cclang_threadsan                         no
  gperftools                               no
  execinfo                                 yes
  W_unused_result                          yes
  f_stack_protector                        yes
  f_stack_protector_strong                 yes
  f_stack_check                            yes
  f_PIE                                    yes
  fdatasync                                yes
  getloadavg                               yes
  atomic32                                 yes
  atomic64                                 yes
  atomic_time_t                            yes
  atomic_ptr                               yes
  bitops64                                 yes
  lockowner                                yes
  qsort_r                                  yes
  stime                                    yes
  gmtoff                                   yes
  recvmmsg                                 yes
  sendmmsg                                 yes
  ifnames                                  yes
  py_gzip                                  yes
  bin_pkg_config                           yes
  bin_xgettext                             yes
  bin_msgmerge                             yes
  bin_gzip                                 yes
  bin_bzip2                                yes
  ssl                                      yes
  linuxdvbapi                              yes
  linuxdvb_ca                              yes
  upnp                                     yes
  omx_rpi                                  yes
  hwaccels                                 yes
  inotify_h                                yes
  inotify_init1                            yes
  dvbcsa                                   yes
  epoll_create1                            yes
  mpegts                                   yes
  mpegts_dvb                               yes

Packages:
  openssl                                  1.1.0j
  zlib                                     1.2.8
  libpcre2-8                               10.22
  liburiparser                             0.8.4
  avahi-client                             0.6.32
  libva                                    0.39.4
  libva-x11                                0.39.4
  libva-drm                                0.39.4
  dbus-1                                   1.10.26

Installation paths:
  Prefix:                                  /usr/local
  Binaries:                                ${prefix}/bin
  Libraries:                               ${prefix}/lib
  Data files:                              ${prefix}/share
  Man pages:                               ${datadir}/man

Final Binary:
  /home/pi/app_sources/tvheadend/build.linux/tvheadend

Tvheadend Data Directory:
  /usr/local/share/tvheadend

Saen Acro

Output with your settings


./configure --disable-libvpx --disable-libx265 --disable-libtheora --disable-libvorbis --disable-hdhomerun_client --disable-hdhomerun_static --disable-bintray_cache --enable-libffmpeg_static --enable-omx --enable-mmal --disable-libopus

andrei tanasescu

saen acro wrote:
> Output with your settings

> [...]

updated post above with my settings

Saen Acro

when just


make -j$(nproc)

is there same errors?