Project

General

Profile

I need help! I would set up my Oscam ymod, with tvheadend

Added by Renato Barbosa over 8 years ago

Dear,
   I need help! I would set up my Oscam ymod, with tvheadend, however I can not, I have the following configuration:

dongle + oscam + tvheadend

This dongle connects to the usb port, it is responsible for receiving the keys, I would like to know how to configure it through the oscam ... Seems simple however I have tried various methods none works, do not know which protocol to use in oscam "serial" "mouse" or "CD".

  Someone good more knowledge than mine could help me?


Replies (7)

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by saen acro over 8 years ago

With is "your" dongle from all available?

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by Jos E over 8 years ago

Renato Barbosa wrote:

Dear,

  Someone good more knowledge than mine could help me?

Can you do, on the command-line:

lsusb

and show the output to us ? Also please give any descriptions of brand/type etc. if you have it. Or perhaps a website of the maker :)

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by Renato Barbosa over 8 years ago

my dongle = PC 40 Dongle SKS site: http://www.evolutionbox.com.br/

Come on now will provide all the data that I have:

command: lsusb

Bus 001 Device 002: ID 9022: d481 TeVii Technology Ltd.
Bus 001 Device 003: ID 9022: d482 TeVii Technology Ltd.
Bus 002 Device 002: ID 0e0f: 0003 VMware, Inc. Virtual Mouse
Bus 002 Device 003: ID 0e0f: 0002 VMware, Inc. Virtual USB Hub
Bus 001 Device 001: ID 1d6b: 0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b: 0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 067b: 2303 Prolific Technology, Inc. PL2303 Serial Port

My device is this bold

My setup:

Oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t33 build #0
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.conf.txt

[global]

nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maxlogsize = 10000

[newcamd]
port = [email protected]:000000
key = 0102030405060708091011121314

[webif]
httpport                      = 5000
httpuser                      = oscam
httppwd                       = oscam
httprefresh                   = 10
httpallowed                   = 127.0.0.1,192.168.254.2-192.168.254.254
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

Oscam.server

twin protocol
[reader]
label               = pc40
enable              = 1
protocol            = serial
group               = 1
device=003:004
device              = twin://@/dev/ttyUSB002:115200?delay=2&timeout=1200
caid                = 0x1802
lb_weight           = 1000    

#newcamd reader
#[reader]
#label               = claro
#enable              = 1
#protocol            = newcamd
#key                 = 1010101010101010101011121314
#device              = www.azcon.tv,4004
#account             = renatobarbosa02,rai0302   
#group               = 2
#disableserverfilter = 1
#emmcache            = 1,3,1
#lb_weight           = 1000

[reader]
label=pc40
enable              = 1
protocol=serial
detect=CD
group=1
emmcache=1,1,2
ecmcache=1
device=002:004
caid=0x1802

Oscam.user

# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t30 build #0

# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.user.txt

[account]

user                          = localuser

group                         = 1

[account]

user = renatobarbosa02

pwd = rai0302

port = 9000

group = 1

uniq = 1

caid = 1802

ident = 1802:000000

monlevel = 0

[account]

user = tvheadend

pwd = tvheadend

uniq = 0

group = 1

ident = 0x1802:000000

#caid = 0x1802

au = pc40

[account]

user=user1

pwd=pass1

group=1

uniq=0

au=pc40

caid=0x1802

ident=0x1802

Configuration in tvheadend:

hostname = 127.0.0.1
user=user1
pwd=pass1
Port = 10000
Des key: 01:02:03:04:05:06:07:08:09:10:11:12:13:14

The oscam log output

2014/08/25 18:23:20 1833 B7595240 c Connection closed to client
2014/08/25 18:23:20 1833 B7595240 c user1 disconnected from 127.0.0.1
2014/08/25 18:23:20 1833 B7595240 c thread B7595240 ended!
2014/08/25 18:23:22 1833 B7595240 c client connected to 10000 port
2014/08/25 18:23:22 1833 B7595240 c encrypted newcamd:10000-client 127.0.0.1 granted (user1, au=on (2 reader))
2014/08/25 18:23:22 1833 B7595240 c user user1 authenticated successfully (unknown - please report)
2014/08/25 18:23:22 1833 B7595240 c AU disabled for user user1
2014/08/25 18:23:22 1833 B7595240 c no valid CAID found in CAID for user 'user1'
2014/08/25 18:23:22 1833 B7595240 c Connection closed to client
2014/08/25 18:23:22 1833 B7595240 c user1 disconnected from 127.0.0.1
2014/08/25 18:23:22 1833 B7595240 c thread B7595240 ended!
2014/08/25 18:23:25 1833 B7595240 c client connected to 10000 port
2014/08/25 18:23:25 1833 B7595240 c encrypted newcamd:10000-client 127.0.0.1 granted (user1, au=on (2 reader))
2014/08/25 18:23:25 1833 B7595240 c user user1 authenticated successfully (unknown - please report)
2014/08/25 18:23:25 1833 B7595240 c AU disabled for user user1
2014/08/25 18:23:25 1833 B7595240 c no valid CAID found in CAID for user 'user1'
2014/08/25 18:23:25 1833 B7595240 c Connection closed to client
2014/08/25 18:23:25 1833 B7595240 c user1 disconnected from 127.0.0.1
2014/08/25 18:23:25 1833 B7595240 c thread B7595240 ended!
2014/08/25 18:23:28 1833 B7595240 c client connected to 10000 port
2014/08/25 18:23:28 1833 B7595240 c encrypted newcamd:10000-client 127.0.0.1 granted (user1, au=on (2 reader))
2014/08/25 18:23:28 1833 B7595240 c user user1 authenticated successfully (unknown - please report)
2014/08/25 18:23:28 1833 B7595240 c AU disabled for user user1
2014/08/25 18:23:28 1833 B7595240 c no valid CAID found in CAID for user 'user1'
2014/08/25 18:23:28 1833 B7595240 c Connection closed to client
2014/08/25 18:23:28 1833 B7595240 c user1 disconnected from 127.0.0.1
2014/08/25 18:23:28 1833 B7595240 c thread B7595240 ended! 

more log

2014/08/24 11:42:06 1833 B75A86C0 s newcamd: Bind request failed, waiting another 5 seconds
2014/08/24 11:42:07 1833 B75A86C0 s newcamd: Bind request failed, waiting another 4 seconds
2014/08/24 11:42:08 1833 B75A86C0 s newcamd: Bind request failed, waiting another 3 seconds
2014/08/24 11:42:09 1833 B75A86C0 s newcamd: Bind request failed, waiting another 2 seconds
2014/08/24 11:42:10 1833 B75A86C0 s newcamd: Bind request failed, waiting another 1 seconds
2014/08/24 11:42:11 1833 B75A86C0 s newcamd: Bind request failed, giving up
2014/08/24 11:42:11 1833 B75A86C0 s cccam: disabled
2014/08/24 11:42:11 1833 B75A86C0 s radegast: disabled
2014/08/24 11:42:11 1833 B75A86C0 s http thread started
2014/08/24 11:42:11 1833 B75A86C0 s creating thread for device twin://@/dev/ttyUSB004:115200?delay=2&timeout=1200
2014/08/24 11:42:11 1833 B75A86C0 s creating thread for device 003:004
2014/08/24 11:42:11 1833 B75A7240 p proxy thread started  (thread=B75A7240, label=pc40, server=twin://@/dev/ttyUSB004:115200?delay=2&timeout=1200)
2014/08/24 11:42:11 1833 B777B240 h HTTP Server couldn't bind on port 5000 (errno=98). Not starting HTTP!
2014/08/24 11:42:11 1833 B75A86C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/24 11:42:11 1833 B75A86C0 s waiting for local card init
2014/08/24 11:42:11 1833 B75A86C0 s init for all local cards done
2014/08/24 11:42:11 1833 B75A7240 p ERROR opening /dev/ttyUSB004
2014/08/24 11:42:11 1833 B75A86C0 s anti cascading disabled
2014/08/24 11:42:11 1833 B75A7240 p exit with signal 1
2014/08/24 11:42:11 1833 B75A7240 p thread B75A7240 ended!
2014/08/24 11:42:11 1833 B75A0240 p proxy thread started  (thread=B75A0240, label=pc40, server=003:004)
2014/08/24 11:42:11 1833 B75A0240 p exit with signal 1
2014/08/24 11:42:11 1833 B75A0240 p thread B75A0240 ended!

log tvheadend
Aug 25 18:25:04.004 cwc: Disconnected from 127.0.0.1:10000
Aug 25 18:25:04.004 cwc: 127.0.0.1:10000: Automatic connection attempt in in 3 seconds
Aug 25 18:25:07.000 cwc: Attemping to connect to 127.0.0.1:10000
Aug 25 18:25:07.000 cwc: Connected to 127.0.0.1:10000
Aug 25 18:25:07.007 cwc: Invalid card data reply (message)
Aug 25 18:25:07.007 cwc: Disconnected from 127.0.0.1:10000
Aug 25 18:25:07.007 cwc: 127.0.0.1:10000: Automatic connection attempt in in 3 seconds
Aug 25 18:25:10.000 cwc: Attemping to connect to 127.0.0.1:10000
Aug 25 18:25:10.000 cwc: Connected to 127.0.0.1:10000
Aug 25 18:25:10.003 cwc: Invalid card data reply (message)
Aug 25 18:25:10.003 cwc: Disconnected from 127.0.0.1:10000
Aug 25 18:25:10.003 cwc: 127.0.0.1:10000: Automatic connection attempt in in 3 seconds

When I try to open I receive this msg

Aug 25 18:38:10.102 subscription: "HTTP" subscribing on "HBO", weight: 100, adapter: "Montage Technology DS3000", network: "Embratel", mux: "Embratel: 10,974,000 kHz Horizontal (Default (Port 0, Universal LNB))", provider: "", service: "HBO", quality: 100
Aug 25 18:38:12.023 webui: Couldn't start streaming /stream/channelid/70, No descrambler
Aug 25 18:38:12.023 subscription: "HTTP" unsubscribing from "HBO" 
Aug 25 18:38:12.149 HTTP: 10.1.0.9: /stream/channelid/70 -- 401

THANK YOU ALL FOR THE HELP !!

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by saen acro over 8 years ago

is Oscam "talking" with card aka anyting in oscam log

can you post dmesg in moment of plugin dongle

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by Renato Barbosa over 8 years ago

[   19.161647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   19.161686] ohci-pci: OHCI PCI platform driver
[   19.161815] ohci-platform: OHCI generic platform driver
[   19.161911] uhci_hcd: USB Universal Host Controller Interface driver
[   19.162503] uhci_hcd 0000:02:00.0: UHCI Host Controller
[   19.162512] uhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[   19.162888] uhci_hcd 0000:02:00.0: irq 18, io base 0x000020c0
[   19.163613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   19.163616] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   19.163619] usb usb2: Product: UHCI Host Controller
[   19.163621] usb usb2: Manufacturer: Linux 3.13.0-34-generic uhci_hcd
[   19.163624] usb usb2: SerialNumber: 0000:02:00.0
[   19.163984] hub 2-0:1.0: USB hub found
[   19.164086] hub 2-0:1.0: 2 ports detected
[   19.165601] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
[   19.168684] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.168968] serio: i8042 AUX port at 0x60,0x64 irq 12
[   19.170024] mousedev: PS/2 mouse device common for all mice
[   19.194630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   19.195961] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   19.198328] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   19.200171] device-mapper: uevent: version 1.0.3
[   19.200964] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[   19.201185] platform eisa.0: Probing EISA bus 0
[   19.201325] platform eisa.0: EISA: Cannot allocate resource for mainboard
[   19.201399] platform eisa.0: Cannot allocate resource for EISA slot 1
[   19.201424] platform eisa.0: Cannot allocate resource for EISA slot 2
[   19.201427] platform eisa.0: Cannot allocate resource for EISA slot 3
[   19.201429] platform eisa.0: Cannot allocate resource for EISA slot 4
[   19.201432] platform eisa.0: Cannot allocate resource for EISA slot 5
[   19.201434] platform eisa.0: Cannot allocate resource for EISA slot 6
[   19.201436] platform eisa.0: Cannot allocate resource for EISA slot 7
[   19.201438] platform eisa.0: Cannot allocate resource for EISA slot 8
[   19.201455] platform eisa.0: EISA: Detected 0 cards
[   19.201816] cpufreq-nforce2: No nForce2 chipset.
[   19.201958] ledtrig-cpu: registered to indicate activity on CPUs
[   19.204076] TCP: cubic registered
[   19.204783] NET: Registered protocol family 10
[   19.211839] NET: Registered protocol family 17
[   19.212943] Key type dns_resolver registered
[   19.213754] Using IPI No-Shortcut mode
[   19.214494] Loading compiled-in X.509 certificates
[   19.223093] Loaded X.509 cert 'Magrathea: Glacier signing key: fc0efbea85b18af92de39c023743014371f77766'
[   19.224433] registered taskstats version 1
[   19.269654] Key type trusted registered
[   19.276066] Key type encrypted registered
[   19.282959] AppArmor: AppArmor sha1 policy hashing enabled
[   19.283155] IMA: No TPM chip found, activating TPM-bypass!
[   19.302562] regulator-dummy: disabling
[   19.304918]   Magic number: 10:735:197
[   19.305245] acpi PNP0100:00: hash matches
[   19.316415] rtc_cmos 00:03: setting system clock to 2014-08-25 21:09:43 UTC (1409000983)
[   19.321197] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   19.321220] EDD information not available.
[   19.321750] PM: Hibernation image not present or could not be loaded.
[   19.378293] isapnp: No Plug & Play device found
[   19.379044] Freeing unused kernel memory: 880K (c19fb000 - c1ad7000)
[   19.379398] Write protecting the kernel text: 6740k
[   19.379476] Write protecting the kernel read-only data: 2836k
[   19.379495] NX-protecting the kernel data: 5548k
[   19.447275] udevd[110]: starting version 175
[   19.474306] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   19.482840] VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI
[   19.505560] VMware PVSCSI driver - version 1.0.2.0-k
[   19.612814] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[   19.615868] usb 1-1: New USB device found, idVendor=9022, idProduct=d481
[   19.615874] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   19.615902] usb 1-1: Product: DVBS2BOX
[   19.615907] usb 1-1: Manufacturer: TBS-Tech
[   19.646403] Fusion MPT base driver 3.04.20
[   19.646431] Copyright (c) 1999-2008 LSI Corporation
[   19.658732] Fusion MPT SPI Host driver 3.04.20
[   19.686612] mptbase: ioc0: Initiating bringup
[   19.688221] ahci 0000:02:05.0: version 3.0
[   19.688619] Floppy drive(s): fd0 is 1.44M
[   19.692004] ahci 0000:02:05.0: irq 72 for MSI/MSI-X
[   19.695554] ahci 0000:02:05.0: AHCI 0001.0300 32 slots 30 ports 6 Gbps 0x3fffffff impl SATA mode
[   19.695720] ahci 0000:02:05.0: flags: 64bit ncq clo only 
[   19.706815] scsi2 : ahci
[   19.711012] scsi3 : ahci
[   19.712903] pcnet32: pcnet32.c:v1.35 21.Apr.2008 [email protected]
[   19.712930] FDC 0 is a post-1991 82077
[   19.715076] scsi4 : ahci
[   19.717390] scsi5 : ahci
[   19.717522] scsi6 : ahci
[   19.717663] scsi7 : ahci
[   19.717827] scsi8 : ahci
[   19.717998] scsi9 : ahci
[   19.718145] scsi10 : ahci
[   19.718277] scsi11 : ahci
[   19.718278] scsi12 : ahci
[   19.718278] scsi13 : ahci
[   19.718278] scsi14 : ahci
[   19.718278] scsi15 : ahci
[   19.718278] scsi16 : ahci
[   19.718278] scsi17 : ahci
[   19.718278] scsi18 : ahci
[   19.718278] scsi19 : ahci
[   19.718280] scsi20 : ahci
[   19.718280] scsi21 : ahci
[   19.718351] scsi22 : ahci
[   19.718468] scsi23 : ahci
[   19.718598] scsi24 : ahci
[   19.718714] scsi25 : ahci
[   19.718796] scsi26 : ahci
[   19.718921] scsi27 : ahci
[   19.719044] scsi28 : ahci
[   19.719214] scsi29 : ahci
[   19.719344] scsi30 : ahci
[   19.719465] scsi31 : ahci
[   19.719712] ata3: SATA max UDMA/133 abar [email protected] port 0xfd5fe100 irq 72
[   19.719756] ata4: SATA max UDMA/133 abar [email protected] port 0xfd5fe180 irq 72
[   19.719763] ata5: SATA max UDMA/133 abar [email protected] port 0xfd5fe200 irq 72
[   19.719766] ata6: SATA max UDMA/133 abar [email protected] port 0xfd5fe280 irq 72
[   19.719771] ata7: SATA max UDMA/133 abar [email protected] port 0xfd5fe300 irq 72
[   19.719775] ata8: SATA max UDMA/133 abar [email protected] port 0xfd5fe380 irq 72
[   19.719780] ata9: SATA max UDMA/133 abar [email protected] port 0xfd5fe400 irq 72
[   19.719785] ata10: SATA max UDMA/133 abar [email protected] port 0xfd5fe480 irq 72
[   19.719790] ata11: SATA max UDMA/133 abar [email protected] port 0xfd5fe500 irq 72
[   19.719794] ata12: SATA max UDMA/133 abar [email protected] port 0xfd5fe580 irq 72
[   19.719799] ata13: SATA max UDMA/133 abar [email protected] port 0xfd5fe600 irq 72
[   19.719803] ata14: SATA max UDMA/133 abar [email protected] port 0xfd5fe680 irq 72
[   19.719808] ata15: SATA max UDMA/133 abar [email protected] port 0xfd5fe700 irq 72
[   19.719812] ata16: SATA max UDMA/133 abar [email protected] port 0xfd5fe780 irq 72
[   19.719817] ata17: SATA max UDMA/133 abar [email protected] port 0xfd5fe800 irq 72
[   19.719821] ata18: SATA max UDMA/133 abar [email protected] port 0xfd5fe880 irq 72
[   19.719826] ata19: SATA max UDMA/133 abar [email protected] port 0xfd5fe900 irq 72
[   19.719831] ata20: SATA max UDMA/133 abar [email protected] port 0xfd5fe980 irq 72
[   19.719835] ata21: SATA max UDMA/133 abar [email protected] port 0xfd5fea00 irq 72
[   19.719839] ata22: SATA max UDMA/133 abar [email protected] port 0xfd5fea80 irq 72
[   19.719844] ata23: SATA max UDMA/133 abar [email protected] port 0xfd5feb00 irq 72
[   19.719849] ata24: SATA max UDMA/133 abar [email protected] port 0xfd5feb80 irq 72
[   19.719853] ata25: SATA max UDMA/133 abar [email protected] port 0xfd5fec00 irq 72
[   19.719857] ata26: SATA max UDMA/133 abar [email protected] port 0xfd5fec80 irq 72
[   19.719862] ata27: SATA max UDMA/133 abar [email protected] port 0xfd5fed00 irq 72
[   19.719866] ata28: SATA max UDMA/133 abar [email protected] port 0xfd5fed80 irq 72
[   19.719871] ata29: SATA max UDMA/133 abar [email protected] port 0xfd5fee00 irq 72
[   19.719875] ata30: SATA max UDMA/133 abar [email protected] port 0xfd5fee80 irq 72
[   19.719880] ata31: SATA max UDMA/133 abar [email protected] port 0xfd5fef00 irq 72
[   19.719899] ata32: SATA max UDMA/133 abar [email protected] port 0xfd5fef80 irq 72
[   19.724568] pcnet32: PCnet/PCI II 79C970A at 0x2000, 00:0c:29:8a:bc:b8 assigned IRQ 19
[   19.726432] usb 1-2: new high-speed USB device number 3 using ehci-pci
[   19.729669] pcnet32: eth0: registered as PCnet/PCI II 79C970A
[   19.736884] pcnet32: 1 cards_found
[   19.762821] ioc0: LSI53C1030 B0: Capabilities={Initiator}
[   19.867443] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[   19.868655] usb 1-2: New USB device found, idVendor=9022, idProduct=d482
[   19.868706] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   19.868752] usb 1-2: Product: DVBS2BOX
[   19.868796] usb 1-2: Manufacturer: TBS-Tech
[   19.928424] scsi32 : ioc0: LSI53C1030 B0, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17
[   19.990698] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[   20.038753] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   20.038959] ata4.00: ATAPI: VMware Virtual SATA CDRW Drive, 00000001, max UDMA/33
[   20.039269] ata4.00: configured for UDMA/33
[   20.039621] ata5: SATA link down (SStatus 0 SControl 300)
[   20.039767] ata6: SATA link down (SStatus 0 SControl 300)
[   20.046478] ata7: SATA link down (SStatus 0 SControl 300)
[   20.050481] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   20.050486] ata8: SATA link down (SStatus 0 SControl 300)
[   20.050488] ata3.00: ATAPI: VMware Virtual SATA CDRW Drive, 00000001, max UDMA/33
[   20.050490] ata3.00: configured for UDMA/33
[   20.050492] scsi: waiting for bus probes to complete ...
[   20.050734] ata10: SATA link down (SStatus 0 SControl 300)
[   20.051353] scsi 32:0:0:0: Direct-Access     VMware,  VMware Virtual S 1.0  PQ: 0 ANSI: 2
[   20.051456] scsi target32:0:0: Beginning Domain Validation
[   20.053125] scsi target32:0:0: Domain Validation skipping write tests
[   20.053149] scsi target32:0:0: Ending Domain Validation
[   20.053355] scsi target32:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
[   20.054811] ata9: SATA link down (SStatus 0 SControl 300)
[   20.058577] ata11: SATA link down (SStatus 0 SControl 300)
[   20.058710] ata13: SATA link down (SStatus 0 SControl 300)
[   20.059663] sd 32:0:0:0: Attached scsi generic sg0 type 0
[   20.060956] sd 32:0:0:0: [sda] 41943040 512-byte logical blocks: (21.4 GB/20.0 GiB)
[   20.061206] sd 32:0:0:0: [sda] Write Protect is off
[   20.061262] sd 32:0:0:0: [sda] Mode Sense: 61 00 00 00
[   20.061572] scsi 2:0:0:0: CD-ROM            NECVMWar VMware SATA CD00 1.00 PQ: 0 ANSI: 5
[   20.061590] sd 32:0:0:0: [sda] Cache data unavailable
[   20.061641] sd 32:0:0:0: [sda] Assuming drive cache: write through
[   20.063016] ata16: SATA link down (SStatus 0 SControl 300)
[   20.064253] sd 32:0:0:0: [sda] Cache data unavailable
[   20.064263] sd 32:0:0:0: [sda] Assuming drive cache: write through
[   20.065125] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[   20.065229] cdrom: Uniform CD-ROM driver Revision: 3.20
[   20.066281] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   20.066622] ata15: SATA link down (SStatus 0 SControl 300)
[   20.066745] ata12: SATA link down (SStatus 0 SControl 300)
[   20.066775] ata27: SATA link down (SStatus 0 SControl 300)
[   20.066803] ata19: SATA link down (SStatus 0 SControl 300)
[   20.066815] ata24: SATA link down (SStatus 0 SControl 300)
[   20.066828] ata21: SATA link down (SStatus 0 SControl 300)
[   20.067050] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   20.070604] ata20: SATA link down (SStatus 0 SControl 300)
[   20.070644] ata26: SATA link down (SStatus 0 SControl 300)
[   20.070676] ata14: SATA link down (SStatus 0 SControl 300)
[   20.070765] ata18: SATA link down (SStatus 0 SControl 300)
[   20.070798] ata17: SATA link down (SStatus 0 SControl 300)
[   20.071473] ata23: SATA link down (SStatus 0 SControl 300)
[   20.071757] scsi 3:0:0:0: CD-ROM            NECVMWar VMware SATA CD01 1.00 PQ: 0 ANSI: 5
[   20.073158] sr1: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
[   20.073527] sr 3:0:0:0: Attached scsi CD-ROM sr1
[   20.073809] sr 3:0:0:0: Attached scsi generic sg2 type 5
[   20.074562] ata25: SATA link down (SStatus 0 SControl 300)
[   20.075824] ata22: SATA link down (SStatus 0 SControl 300)
[   20.075865] ata31: SATA link down (SStatus 0 SControl 300)
[   20.075898] ata32: SATA link down (SStatus 0 SControl 300)
[   20.078622] ata30: SATA link down (SStatus 0 SControl 300)
[   20.078652] ata28: SATA link down (SStatus 0 SControl 300)
[   20.078683] ata29: SATA link down (SStatus 0 SControl 300)
[   20.082964]  sda: sda1 sda2 < sda5 >
[   20.084845] sd 32:0:0:0: [sda] Cache data unavailable
[   20.084874] sd 32:0:0:0: [sda] Assuming drive cache: write through
[   20.085183] sd 32:0:0:0: [sda] Attached SCSI disk
[   20.126528] usb 2-1: New USB device found, idVendor=0e0f, idProduct=0003
[   20.126528] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   20.126528] usb 2-1: Product: VMware Virtual USB Mouse
[   20.126528] usb 2-1: Manufacturer: VMware
[   20.238876] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[   20.284795] hidraw: raw HID events driver (C) Jiri Kosina
[   20.291753] usbcore: registered new interface driver usbhid
[   20.291774] usbhid: USB HID core driver
[   20.300022] input: VMware VMware Virtual USB Mouse as /devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/input/input3
[   20.301168] hid-generic 0003:0E0F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [VMware VMware Virtual USB Mouse] on usb-0000:02:00.0-1/input0
[   20.368499] usb 2-2: New USB device found, idVendor=0e0f, idProduct=0002
[   20.368521] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   20.368540] usb 2-2: Product: VMware Virtual USB Hub
[   20.374786] hub 2-2:1.0: USB hub found
[   20.376769] hub 2-2:1.0: 7 ports detected
[   20.459571] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[   20.459596] EXT4-fs (sda1): write access will be enabled during recovery
[   20.760381] EXT4-fs (sda1): orphan cleanup on readonly fs
[   20.763367] EXT4-fs (sda1): 4 orphan inodes deleted
[   20.763403] EXT4-fs (sda1): recovery complete
[   20.768049] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   21.086536] random: nonblocking pool is initialized
[   22.774295] init: ureadahead main process (429) terminated with status 5
[   23.656942] Adding 1046524k swap on /dev/sda5.  Priority:-1 extents:1 across:1046524k FS
[   24.584808] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.963443] udevd[505]: starting version 175
[   28.334734] lp: driver loaded but no devices found
[   31.387159] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   41.745192] parport_pc 00:08: reported by Plug and Play ACPI
[   41.749287] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   41.893337] lp0: using parport0 (interrupt-driven).
[   42.643094] vmw_vmci 0000:00:07.7: Found VMCI PCI device at 0x11080, irq 16
[   42.643525] vmw_vmci 0000:00:07.7: Using capabilities 0xc
[   42.645082] vmw_vmci 0000:00:07.7: irq 73 for MSI/MSI-X
[   42.645155] vmw_vmci 0000:00:07.7: irq 74 for MSI/MSI-X
[   42.646786] Guest personality initialized and is active
[   42.647609] VMCI host device registered (name=vmci, major=10, minor=57)
[   42.647675] Initialized host personality
[   43.147016] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled!
[   43.339404] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   43.535142] [drm] Initialized drm 1.1.0 20060810
[   45.245136] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[   45.294294] [drm] DMA map mode: Using physical TTM page addresses.
[   45.294566] [drm] Capabilities:
[   45.294582] [drm]   Rect copy.
[   45.294600] [drm]   Cursor.
[   45.294618] [drm]   Cursor bypass.
[   45.294636] [drm]   Cursor bypass 2.
[   45.294655] [drm]   8bit emulation.
[   45.294674] [drm]   Alpha cursor.
[   45.294694] [drm]   3D.
[   45.294712] [drm]   Extended Fifo.
[   45.294743] [drm]   Multimon.
[   45.294762] [drm]   Pitchlock.
[   45.294796] [drm]   Irq mask.
[   45.294815] [drm]   Display Topology.
[   45.294835] [drm]   GMR.
[   45.294855] [drm]   Traces.
[   45.294874] [drm]   GMR2.
[   45.294896] [drm]   Screen Object 2.
[   45.294990] [drm]   Command Buffers.
[   45.295059] [drm] Max GMR ids is 64
[   45.295075] [drm] Max number of GMR pages is 196608
[   45.295091] [drm] Max dedicated hypervisor surface memory is 786432 kiB
[   45.295121] [drm] Maximum display memory size is 131072 kiB
[   45.295144] [drm] VRAM at 0xe8000000 size is 131072 kiB
[   45.295162] [drm] MMIO at 0xfe000000 size is 2048 kiB
[   45.296216] [drm] global init.
[   45.340172] [TTM] Zone  kernel: Available graphics memory: 439966 kiB
[   45.340206] [TTM] Zone highmem: Available graphics memory: 1031778 kiB
[   45.340283] [TTM] Initializing pool allocator
[   45.340577] [TTM] Initializing DMA pool allocator
[   45.389885] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   45.389919] [drm] No driver support for vblank timestamp query.
[   45.393008] [drm] Screen objects system initialized
[   45.393535] [drm] width 640
[   45.393568] [drm] height 480
[   45.393612] [drm] bpp 32
[   45.486708] [drm] Fifo max 0x00200000 min 0x00001000 cap 0x0000077f
[   45.693830] fbcon: svgadrmfb (fb0) is primary device
[   45.849320] Console: switching to colour frame buffer device 100x37
[   45.890876] [drm] Initialized vmwgfx 2.5.0 20140228 for 0000:00:0f.0 on minor 0
[   46.748613] ppdev: user-space parallel port driver
[   53.206043] type=1400 audit(1409001017.373:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=866 comm="apparmor_parser" 
[   53.206466] type=1400 audit(1409001017.373:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=866 comm="apparmor_parser" 
[   53.206604] type=1400 audit(1409001017.373:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=866 comm="apparmor_parser" 
[   53.241270] type=1400 audit(1409001017.377:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=865 comm="apparmor_parser" 
[   53.242137] type=1400 audit(1409001017.413:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser" 
[   53.242187] type=1400 audit(1409001017.413:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser" 
[   53.242379] type=1400 audit(1409001017.413:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=866 comm="apparmor_parser" 
[   53.242791] type=1400 audit(1409001017.413:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=866 comm="apparmor_parser" 
[   53.243113] type=1400 audit(1409001017.413:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=865 comm="apparmor_parser" 
[   53.243120] type=1400 audit(1409001017.413:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=865 comm="apparmor_parser" 
[   53.543829] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to load a firmware
[   55.694992] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   55.695118] dw2102: start downloading DW210X firmware
[   56.654543] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[   56.657246] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   56.696677] DVB: registering new adapter (TeVii S480.1 USB)
[   58.108992] dvb-usb: MAC address: 00:18:bd:5b:34:35
[   58.318198] init: failsafe main process (1019) killed by TERM signal
[   58.943270] DS3000 chip version: 0.192 attached.
[   59.515867] ts2020_attach: Find tuner TS2020!
[   59.517119] dw2102: Attached ds3000+ts2020!
[   59.517119] 
[   59.517358] usb 1-1: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000)...
[   59.531631] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/input/input5
[   59.533623] dvb-usb: schedule remote query interval to 150 msecs.
[   59.534758] dvb-usb: TeVii S480.1 USB successfully initialized and connected.
[   59.536601] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to load a firmware
[   59.537901] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   59.537970] dw2102: start downloading DW210X firmware
[   59.923668] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[   59.924683] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   59.925818] DVB: registering new adapter (TeVii S480.2 USB)
[   60.917397] dvb-usb: MAC address: 00:18:bd:5b:34:36
[   60.940711] DS3000 chip version: 0.192 attached.
[   60.980438] ts2020_attach: Find tuner TS2020!
[   60.982279] dw2102: Attached ds3000+ts2020!
[   60.982279] 
[   60.982650] usb 1-2: DVB: registering adapter 1 frontend 0 (Montage Technology DS3000)...
[   60.986922] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-2/input/input6
[   60.987233] dvb-usb: schedule remote query interval to 150 msecs.
[   60.987244] dvb-usb: TeVii S480.2 USB successfully initialized and connected.
[   60.988758] usbcore: registered new interface driver dw2102
[   61.460208] audit_printk_skb: 6 callbacks suppressed
[   61.460243] type=1400 audit(1409001025.621:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1120 comm="apparmor_parser" 
[   61.461370] type=1400 audit(1409001025.625:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1120 comm="apparmor_parser" 
[   61.464558] type=1400 audit(1409001025.629:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1120 comm="apparmor_parser" 
[   62.106572] Bluetooth: Core ver 2.17
[   62.106706] NET: Registered protocol family 31
[   62.106726] Bluetooth: HCI device and connection manager initialized
[   62.106932] Bluetooth: HCI socket layer initialized
[   62.107035] Bluetooth: L2CAP socket layer initialized
[   62.107174] Bluetooth: SCO socket layer initialized
[   62.640919] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   62.641006] Bluetooth: BNEP filters: protocol multicast
[   62.641363] Bluetooth: BNEP socket layer initialized
[   62.665159] Bluetooth: RFCOMM TTY layer initialized
[   62.665950] Bluetooth: RFCOMM socket layer initialized
[   62.666140] Bluetooth: RFCOMM ver 1.11
[   68.861469] pcnet32 0000:02:01.0 eth0: link up
[   71.607962] type=1400 audit(1409001035.765:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1210 comm="apparmor_parser" 
[   71.608651] type=1400 audit(1409001035.765:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1210 comm="apparmor_parser" 
[   71.608824] type=1400 audit(1409001035.765:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1210 comm="apparmor_parser" 
[   71.609937] type=1400 audit(1409001035.765:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1210 comm="apparmor_parser" 
[   71.609946] type=1400 audit(1409001035.765:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1210 comm="apparmor_parser" 
[   71.610386] type=1400 audit(1409001035.769:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1210 comm="apparmor_parser" 
[   71.627285] type=1400 audit(1409001035.785:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1214 comm="apparmor_parser" 
[   71.627316] type=1400 audit(1409001035.785:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1214 comm="apparmor_parser" 
[   71.628807] type=1400 audit(1409001035.785:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1214 comm="apparmor_parser" 
[   71.891471] type=1400 audit(1409001036.049:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1216 comm="apparmor_parser" 
[   84.871625] init: vmware-tools pre-start process (1267) terminated with status 1
[   88.194384] audit_printk_skb: 126 callbacks suppressed
[   88.194402] type=1400 audit(1409001052.341:69): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1137 comm="cupsd" capability=36  capname="block_suspend" 
[   92.882073] type=1400 audit(1409001057.025:70): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1137 comm="cupsd" capability=36  capname="block_suspend" 
[  116.526868] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  116.578283] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[  118.043031] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[  118.043094] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[  190.723955] [sched_delayed] sched: RT throttling activated
[  194.798495] type=1400 audit(1409001158.873:71): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=2741 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  384.407695] sda1: WRITE SAME failed. Manually zeroing.
[  422.052906] usb 2-2.1: new full-speed USB device number 4 using uhci_hcd
[  422.222011] usb 2-2.1: New USB device found, idVendor=067b, idProduct=2303
[  422.222033] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  422.222051] usb 2-2.1: Product: USB 2.0 To COM Device
[  422.222067] usb 2-2.1: Manufacturer: Prolific Technology Inc.
[  422.375832] usbcore: registered new interface driver usbserial
[  422.376143] usbcore: registered new interface driver usbserial_generic
[  422.377443] usbserial: USB Serial support registered for generic
[  422.397915] usbcore: registered new interface driver pl2303
[  422.397949] usbserial: USB Serial support registered for pl2303
[  422.398741] pl2303 2-2.1:1.0: pl2303 converter detected
[  422.415183] usb 2-2.1: pl2303 converter now attached to ttyUSB0

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by Renato Barbosa over 8 years ago

When I use the tvheadend User

I get this error in the log oscam

25/08/2014 18:57:39 1833 B759C240 c in valid CAID CAID found in 'tvheadend' for user

RE: I need help! I would set up my Oscam ymod, with tvheadend - Added by Renato Barbosa over 8 years ago

I changed my setup I get the following msg

Aug 25 19:23:55.000 cwc: Attemping to connect to 127.0.0.1:10000
Aug 25 19:23:55.000 cwc: Connected to 127.0.0.1:10000
Aug 25 19:23:55.005 cwc: 127.0.0.1:10000: Connected as user 0x0b to a NagraVision-card [0x1802 : 00.00.00.00.00.00.00.00] with 1 providers
Aug 25 19:23:55.005 cwc: 127.0.0.1:10000: nagra card
Aug 25 19:23:55.005 cwc: 127.0.0.1:10000: Provider ID #1: 0x000000 00.00.00.00.00.00.00.00
Aug 25 19:23:55.005 cwc: 127.0.0.1:10000: Will not forward EMMs (not allowed by server)

However when I try to open a channel lock the oscam in ubuntu

when trying to open a channel

g 25 23: 36: 13.988 cwc: 127.0.0.1:10000: Decoderloop: Read error (header): Connection reset by peer
Aug 25 23: 36: 13.988 cwc: Disconnected from 127.0.0.1:10000

See my status

    (1-7/7)