Project

General

Profile

RE: Request for help with tuners. » Dmesg_Before.txt

dmesg before aplication uses device - Paraic McDonagh, 2017-05-29 11:14

 
1
[    0.000000] Linux version 4.10.0-21-generic ([email protected]) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #23-Ubuntu SMP Fri Apr 28 16:14:22 UTC 2017 (Ubuntu 4.10.0-21.23-generic 4.10.11)
2
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-21-generic root=UUID=5557948f-05be-40d5-84ac-a6f5787a11a5 ro quiet splash vt.handoff=7
3
[    0.000000] KERNEL supported cpus:
4
[    0.000000]   Intel GenuineIntel
5
[    0.000000]   AMD AuthenticAMD
6
[    0.000000]   Centaur CentaurHauls
7
[    0.000000] x86/fpu: Legacy x87 FPU detected.
8
[    0.000000] e820: BIOS-provided physical RAM map:
9
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
10
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
11
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
12
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a5b86fff] usable
13
[    0.000000] BIOS-e820: [mem 0x00000000a5b87000-0x00000000a5e67fff] reserved
14
[    0.000000] BIOS-e820: [mem 0x00000000a5e68000-0x00000000a5e77fff] ACPI data
15
[    0.000000] BIOS-e820: [mem 0x00000000a5e78000-0x00000000a5f55fff] ACPI NVS
16
[    0.000000] BIOS-e820: [mem 0x00000000a5f56000-0x00000000a68d1fff] reserved
17
[    0.000000] BIOS-e820: [mem 0x00000000a68d2000-0x00000000a68d2fff] usable
18
[    0.000000] BIOS-e820: [mem 0x00000000a68d3000-0x00000000a68d9fff] ACPI NVS
19
[    0.000000] BIOS-e820: [mem 0x00000000a68da000-0x00000000a6cf8fff] usable
20
[    0.000000] BIOS-e820: [mem 0x00000000a6cf9000-0x00000000a6ff3fff] reserved
21
[    0.000000] BIOS-e820: [mem 0x00000000a6ff4000-0x00000000a6ffffff] usable
22
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
23
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
24
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
25
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
26
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
27
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
28
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
29
[    0.000000] NX (Execute Disable) protection: active
30
[    0.000000] SMBIOS 2.7 present.
31
[    0.000000] DMI: System manufacturer System Product Name/E2KM1I-DELUXE, BIOS 0406 02/25/2013
32
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
33
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
34
[    0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
35
[    0.000000] MTRR default type: uncachable
36
[    0.000000] MTRR fixed ranges enabled:
37
[    0.000000]   00000-9FFFF write-back
38
[    0.000000]   A0000-BFFFF write-through
39
[    0.000000]   C0000-CEFFF write-protect
40
[    0.000000]   CF000-E7FFF uncachable
41
[    0.000000]   E8000-FFFFF write-protect
42
[    0.000000] MTRR variable ranges enabled:
43
[    0.000000]   0 base 000000000 mask F80000000 write-back
44
[    0.000000]   1 base 080000000 mask FE0000000 write-back
45
[    0.000000]   2 base 0A0000000 mask FFC000000 write-back
46
[    0.000000]   3 base 0A4000000 mask FFE000000 write-back
47
[    0.000000]   4 base 0A6000000 mask FFF000000 write-back
48
[    0.000000]   5 disabled
49
[    0.000000]   6 disabled
50
[    0.000000]   7 disabled
51
[    0.000000] TOM2: 000000023f000000 aka 9200M
52
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
53
[    0.000000] e820: update [mem 0xa7000000-0xffffffff] usable ==> reserved
54
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
55
[    0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff9b53800fd710]
56
[    0.000000] Scanning 1 areas for low memory corruption
57
[    0.000000] Base memory trampoline at [ffff9b5380098000] 98000 size 24576
58
[    0.000000] Using GB pages for direct mapping
59
[    0.000000] BRK [0x7c028000, 0x7c028fff] PGTABLE
60
[    0.000000] BRK [0x7c029000, 0x7c029fff] PGTABLE
61
[    0.000000] BRK [0x7c02a000, 0x7c02afff] PGTABLE
62
[    0.000000] BRK [0x7c02b000, 0x7c02bfff] PGTABLE
63
[    0.000000] BRK [0x7c02c000, 0x7c02cfff] PGTABLE
64
[    0.000000] BRK [0x7c02d000, 0x7c02dfff] PGTABLE
65
[    0.000000] BRK [0x7c02e000, 0x7c02efff] PGTABLE
66
[    0.000000] BRK [0x7c02f000, 0x7c02ffff] PGTABLE
67
[    0.000000] BRK [0x7c030000, 0x7c030fff] PGTABLE
68
[    0.000000] BRK [0x7c031000, 0x7c031fff] PGTABLE
69
[    0.000000] RAMDISK: [mem 0x32dff000-0x356f6fff]
70
[    0.000000] ACPI: Early table checksum verification disabled
71
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
72
[    0.000000] ACPI: XSDT 0x00000000A5E6F078 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
73
[    0.000000] ACPI: FACP 0x00000000A5E761A0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
74
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
75
[    0.000000] ACPI: DSDT 0x00000000A5E6F170 00702A (v02 ALASKA A M I    00000000 INTL 20051117)
76
[    0.000000] ACPI: FACS 0x00000000A5F54080 000040
77
[    0.000000] ACPI: APIC 0x00000000A5E762B0 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
78
[    0.000000] ACPI: FPDT 0x00000000A5E76318 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
79
[    0.000000] ACPI: MCFG 0x00000000A5E76360 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
80
[    0.000000] ACPI: BGRT 0x00000000A5E77EA0 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
81
[    0.000000] ACPI: HPET 0x00000000A5E763F8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
82
[    0.000000] ACPI: SSDT 0x00000000A5E76430 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
83
[    0.000000] ACPI: SSDT 0x00000000A5E76810 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
84
[    0.000000] ACPI: Local APIC address 0xfee00000
85
[    0.000000] No NUMA configuration found
86
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
87
[    0.000000] NODE_DATA(0) allocated [mem 0x23efd3000-0x23effdfff]
88
[    0.000000] Zone ranges:
89
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
90
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
91
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023effffff]
92
[    0.000000]   Device   empty
93
[    0.000000] Movable zone start for each node
94
[    0.000000] Early memory node ranges
95
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
96
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a5b86fff]
97
[    0.000000]   node   0: [mem 0x00000000a68d2000-0x00000000a68d2fff]
98
[    0.000000]   node   0: [mem 0x00000000a68da000-0x00000000a6cf8fff]
99
[    0.000000]   node   0: [mem 0x00000000a6ff4000-0x00000000a6ffffff]
100
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000023effffff]
101
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
102
[    0.000000] On node 0 totalpages: 1986383
103
[    0.000000]   DMA zone: 64 pages used for memmap
104
[    0.000000]   DMA zone: 21 pages reserved
105
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
106
[    0.000000]   DMA32 zone: 10559 pages used for memmap
107
[    0.000000]   DMA32 zone: 675763 pages, LIFO batch:31
108
[    0.000000]   Normal zone: 20416 pages used for memmap
109
[    0.000000]   Normal zone: 1306623 pages, LIFO batch:31
110
[    0.000000] ACPI: PM-Timer IO Port: 0x808
111
[    0.000000] ACPI: Local APIC address 0xfee00000
112
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
113
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
115
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
116
[    0.000000] ACPI: IRQ0 used by override.
117
[    0.000000] ACPI: IRQ9 used by override.
118
[    0.000000] Using ACPI (MADT) for SMP configuration information
119
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
120
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
121
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
122
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
123
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
124
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
125
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
126
[    0.000000] PM: Registered nosave memory: [mem 0xa5b87000-0xa5e67fff]
127
[    0.000000] PM: Registered nosave memory: [mem 0xa5e68000-0xa5e77fff]
128
[    0.000000] PM: Registered nosave memory: [mem 0xa5e78000-0xa5f55fff]
129
[    0.000000] PM: Registered nosave memory: [mem 0xa5f56000-0xa68d1fff]
130
[    0.000000] PM: Registered nosave memory: [mem 0xa68d3000-0xa68d9fff]
131
[    0.000000] PM: Registered nosave memory: [mem 0xa6cf9000-0xa6ff3fff]
132
[    0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xfebfffff]
133
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
134
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
135
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
136
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
137
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
138
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
139
[    0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
140
[    0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
141
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
142
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
143
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
144
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
145
[    0.000000] e820: [mem 0xa7000000-0xfebfffff] available for PCI devices
146
[    0.000000] Booting paravirtualized kernel on bare hardware
147
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
148
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
149
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9b55bec00000 s107992 r8192 d31272 u1048576
150
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u1048576 alloc=1*2097152
151
[    0.000000] pcpu-alloc: [0] 0 1 
152
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1955323
153
[    0.000000] Policy zone: Normal
154
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-21-generic root=UUID=5557948f-05be-40d5-84ac-a6f5787a11a5 ro quiet splash vt.handoff=7
155
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
156
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
157
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
158
[    0.000000] Memory: 7691396K/7945532K available (9081K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 254136K reserved, 0K cma-reserved)
159
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
160
[    0.000000] Hierarchical RCU implementation.
161
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
162
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
163
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
164
[    0.000000] NR_IRQS:524544 nr_irqs:440 16
165
[    0.000000] spurious 8259A interrupt: IRQ7.
166
[    0.000000] vt handoff: transparent VT on vt#7
167
[    0.000000] Console: colour dummy device 80x25
168
[    0.000000] console [tty0] enabled
169
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
170
[    0.000000] hpet clockevent registered
171
[    0.000000] tsc: Fast TSC calibration using PIT
172
[    0.000000] tsc: Detected 1751.024 MHz processor
173
[    0.000060] Calibrating delay loop (skipped), value calculated using timer frequency.. 3502.04 BogoMIPS (lpj=7004096)
174
[    0.000066] pid_max: default: 32768 minimum: 301
175
[    0.000095] ACPI: Core revision 20160930
176
[    0.008340] ACPI: 3 ACPI AML tables successfully acquired and loaded
177
[    0.008409] Security Framework initialized
178
[    0.008412] Yama: becoming mindful.
179
[    0.008443] AppArmor: AppArmor initialized
180
[    0.009404] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
181
[    0.014581] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
182
[    0.017007] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
183
[    0.017033] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
184
[    0.017659] CPU: Physical Processor ID: 0
185
[    0.017661] CPU: Processor Core ID: 0
186
[    0.017665] mce: CPU supports 6 MCE banks
187
[    0.017680] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
188
[    0.017682] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
189
[    0.020202] Freeing SMP alternatives memory: 32K
190
[    0.144971] ftrace: allocating 34172 entries in 134 pages
191
[    0.173691] smpboot: Max logical packages: 1
192
[    0.174089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
193
[    0.319341] smpboot: CPU0: AMD E2-2000 APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
194
[    0.319487] Performance Events: AMD PMU driver.
195
[    0.319495] ... version:                0
196
[    0.319497] ... bit width:              48
197
[    0.319498] ... generic registers:      4
198
[    0.319499] ... value mask:             0000ffffffffffff
199
[    0.319500] ... max period:             00007fffffffffff
200
[    0.319501] ... fixed-purpose events:   0
201
[    0.319502] ... event mask:             000000000000000f
202
[    0.320925] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
203
[    0.320971] smp: Bringing up secondary CPUs ...
204
[    0.321208] x86: Booting SMP configuration:
205
[    0.321211] .... node  #0, CPUs:      #1
206
[    0.323509] smp: Brought up 1 node, 2 CPUs
207
[    0.323515] smpboot: Total of 2 processors activated (7004.09 BogoMIPS)
208
[    0.324934] devtmpfs: initialized
209
[    0.325107] x86/mm: Memory block size: 128MB
210
[    0.332707] evm: security.selinux
211
[    0.332709] evm: security.SMACK64
212
[    0.332709] evm: security.SMACK64EXEC
213
[    0.332710] evm: security.SMACK64TRANSMUTE
214
[    0.332711] evm: security.SMACK64MMAP
215
[    0.332712] evm: security.ima
216
[    0.332713] evm: security.capability
217
[    0.332951] PM: Registering ACPI NVS region [mem 0xa5e78000-0xa5f55fff] (909312 bytes)
218
[    0.332989] PM: Registering ACPI NVS region [mem 0xa68d3000-0xa68d9fff] (28672 bytes)
219
[    0.333126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
220
[    0.333139] futex hash table entries: 512 (order: 3, 32768 bytes)
221
[    0.333221] pinctrl core: initialized pinctrl subsystem
222
[    0.333459] RTC time:  8:14:08, date: 05/29/17
223
[    0.333688] NET: Registered protocol family 16
224
[    0.347551] cpuidle: using governor ladder
225
[    0.363548] cpuidle: using governor menu
226
[    0.363557] PCCT header not found.
227
[    0.363939] ACPI: bus type PCI registered
228
[    0.363944] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
229
[    0.364117] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
230
[    0.364123] PCI: not using MMCONFIG
231
[    0.364124] PCI: Using configuration type 1 for base access
232
[    0.364125] PCI: Using configuration type 1 for extended access
233
[    0.364791] mtrr: your CPUs had inconsistent variable MTRR settings
234
[    0.364793] mtrr: probably your BIOS does not setup all CPUs.
235
[    0.364794] mtrr: corrected configuration.
236
[    0.380454] HugeTLB registered 1 GB page size, pre-allocated 0 pages
237
[    0.380457] HugeTLB registered 2 MB page size, pre-allocated 0 pages
238
[    0.381204] ACPI: Added _OSI(Module Device)
239
[    0.381207] ACPI: Added _OSI(Processor Device)
240
[    0.381208] ACPI: Added _OSI(3.0 _SCP Extensions)
241
[    0.381209] ACPI: Added _OSI(Processor Aggregator Device)
242
[    0.381538] ACPI: Executed 2 blocks of module-level executable AML code
243
[    0.387713] ACPI: Interpreter enabled
244
[    0.387752] ACPI: (supports S0 S3 S4 S5)
245
[    0.387754] ACPI: Using IOAPIC for interrupt routing
246
[    0.387829] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
247
[    0.387915] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
248
[    0.387946] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
249
[    0.400254] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
250
[    0.400265] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
251
[    0.400275] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
252
[    0.400875] PCI host bridge to bus 0000:00
253
[    0.400880] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
254
[    0.400882] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
255
[    0.400885] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
256
[    0.400888] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
257
[    0.400896] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
258
[    0.400899] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
259
[    0.400901] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
260
[    0.400904] pci_bus 0000:00: root bus resource [bus 00-ff]
261
[    0.400919] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
262
[    0.401126] pci 0000:00:01.0: [1002:9808] type 00 class 0x030000
263
[    0.401141] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
264
[    0.401150] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
265
[    0.401158] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
266
[    0.401222] pci 0000:00:01.0: supports D1 D2
267
[    0.401364] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
268
[    0.401378] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
269
[    0.401451] pci 0000:00:01.1: supports D1 D2
270
[    0.401600] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
271
[    0.401676] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
272
[    0.401776] pci 0000:00:04.0: System wakeup disabled by ACPI
273
[    0.401873] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
274
[    0.401895] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
275
[    0.401907] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
276
[    0.401920] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
277
[    0.401932] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
278
[    0.401944] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
279
[    0.401957] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4f000-0xfeb4f3ff]
280
[    0.402156] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
281
[    0.402175] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
282
[    0.402338] pci 0000:00:12.0: System wakeup disabled by ACPI
283
[    0.402419] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
284
[    0.402442] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
285
[    0.402548] pci 0000:00:12.2: supports D1 D2
286
[    0.402550] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
287
[    0.402643] pci 0000:00:12.2: System wakeup disabled by ACPI
288
[    0.402724] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
289
[    0.402742] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
290
[    0.402906] pci 0000:00:13.0: System wakeup disabled by ACPI
291
[    0.402987] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
292
[    0.403009] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4b000-0xfeb4b0ff]
293
[    0.403115] pci 0000:00:13.2: supports D1 D2
294
[    0.403118] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
295
[    0.403210] pci 0000:00:13.2: System wakeup disabled by ACPI
296
[    0.403290] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
297
[    0.403550] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
298
[    0.403577] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
299
[    0.403666] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
300
[    0.403757] pci 0000:00:14.2: System wakeup disabled by ACPI
301
[    0.403829] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
302
[    0.404070] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
303
[    0.404206] pci 0000:00:14.4: System wakeup disabled by ACPI
304
[    0.404277] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
305
[    0.404295] pci 0000:00:14.5: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
306
[    0.404458] pci 0000:00:14.5: System wakeup disabled by ACPI
307
[    0.404542] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
308
[    0.404645] pci 0000:00:15.0: supports D1 D2
309
[    0.404741] pci 0000:00:15.0: System wakeup disabled by ACPI
310
[    0.404824] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
311
[    0.404924] pci 0000:00:15.1: supports D1 D2
312
[    0.405020] pci 0000:00:15.1: System wakeup disabled by ACPI
313
[    0.405097] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
314
[    0.405197] pci 0000:00:15.2: supports D1 D2
315
[    0.405299] pci 0000:00:15.2: System wakeup disabled by ACPI
316
[    0.405377] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
317
[    0.405477] pci 0000:00:15.3: supports D1 D2
318
[    0.405572] pci 0000:00:15.3: System wakeup disabled by ACPI
319
[    0.405653] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
320
[    0.405671] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
321
[    0.405835] pci 0000:00:16.0: System wakeup disabled by ACPI
322
[    0.405913] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
323
[    0.405935] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
324
[    0.406041] pci 0000:00:16.2: supports D1 D2
325
[    0.406044] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
326
[    0.406137] pci 0000:00:16.2: System wakeup disabled by ACPI
327
[    0.406219] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
328
[    0.406394] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
329
[    0.406566] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
330
[    0.406736] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
331
[    0.406916] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
332
[    0.407086] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
333
[    0.407252] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
334
[    0.407436] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
335
[    0.407702] pci 0000:01:00.0: [14f1:8852] type 00 class 0x040000
336
[    0.407735] pci 0000:01:00.0: reg 0x10: [mem 0xfe600000-0xfe7fffff 64bit]
337
[    0.407894] pci 0000:01:00.0: supports D1 D2
338
[    0.407897] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
339
[    0.407997] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
340
[    0.408010] pci 0000:00:04.0: PCI bridge to [bus 01]
341
[    0.408019] pci 0000:00:04.0:   bridge window [mem 0xfe600000-0xfe7fffff]
342
[    0.408133] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
343
[    0.408145] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
344
[    0.408148] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
345
[    0.408150] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
346
[    0.408153] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
347
[    0.408155] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
348
[    0.408158] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
349
[    0.408161] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
350
[    0.408264] pci 0000:03:00.0: [14e4:4359] type 00 class 0x028000
351
[    0.408298] pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea03fff 64bit]
352
[    0.408479] pci 0000:03:00.0: supports D1 D2
353
[    0.408481] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
354
[    0.419579] pci 0000:00:15.0: PCI bridge to [bus 03]
355
[    0.419600] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
356
[    0.419801] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
357
[    0.419831] pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
358
[    0.419869] pci 0000:04:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
359
[    0.419893] pci 0000:04:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
360
[    0.420025] pci 0000:04:00.0: supports D1 D2
361
[    0.420027] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
362
[    0.420120] pci 0000:04:00.0: System wakeup disabled by ACPI
363
[    0.431578] pci 0000:00:15.1: PCI bridge to [bus 04]
364
[    0.431594] pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
365
[    0.431610] pci 0000:00:15.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
366
[    0.431781] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
367
[    0.431822] pci 0000:05:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
368
[    0.432011] pci 0000:05:00.0: PME# supported from D3hot D3cold
369
[    0.443573] pci 0000:00:15.2: PCI bridge to [bus 05]
370
[    0.443593] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
371
[    0.443765] pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
372
[    0.443805] pci 0000:06:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
373
[    0.443995] pci 0000:06:00.0: PME# supported from D3hot D3cold
374
[    0.455573] pci 0000:00:15.3: PCI bridge to [bus 06]
375
[    0.455594] pci 0000:00:15.3:   bridge window [mem 0xfe800000-0xfe8fffff]
376
[    0.456483] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 *15)
377
[    0.456619] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *7 10 11 14 15)
378
[    0.456754] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
379
[    0.456889] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15)
380
[    0.457001] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
381
[    0.457092] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
382
[    0.457181] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
383
[    0.457271] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
384
[    0.458142] SCSI subsystem initialized
385
[    0.458329] libata version 3.00 loaded.
386
[    0.458591] pci 0000:00:01.0: vgaarb: setting as boot VGA device
387
[    0.458596] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
388
[    0.458612] pci 0000:00:01.0: vgaarb: bridge control possible
389
[    0.458614] vgaarb: loaded
390
[    0.458699] ACPI: bus type USB registered
391
[    0.458749] usbcore: registered new interface driver usbfs
392
[    0.458768] usbcore: registered new interface driver hub
393
[    0.458815] usbcore: registered new device driver usb
394
[    0.459372] PCI: Using ACPI for IRQ routing
395
[    0.469961] PCI: pci_cache_line_size set to 64 bytes
396
[    0.470087] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
397
[    0.470090] e820: reserve RAM buffer [mem 0xa5b87000-0xa7ffffff]
398
[    0.470093] e820: reserve RAM buffer [mem 0xa68d3000-0xa7ffffff]
399
[    0.470094] e820: reserve RAM buffer [mem 0xa6cf9000-0xa7ffffff]
400
[    0.470096] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
401
[    0.470098] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
402
[    0.470323] NetLabel: Initializing
403
[    0.470325] NetLabel:  domain hash size = 128
404
[    0.470326] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
405
[    0.470357] NetLabel:  unlabeled traffic allowed by default
406
[    0.470842] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
407
[    0.470852] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
408
[    0.472967] clocksource: Switched to clocksource hpet
409
[    0.491490] VFS: Disk quotas dquot_6.6.0
410
[    0.491535] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
411
[    0.491782] AppArmor: AppArmor Filesystem Enabled
412
[    0.491895] pnp: PnP ACPI init
413
[    0.492192] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
414
[    0.492202] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
415
[    0.492752] system 00:01: [io  0x040b] has been reserved
416
[    0.492755] system 00:01: [io  0x04d6] has been reserved
417
[    0.492758] system 00:01: [io  0x0c00-0x0c01] has been reserved
418
[    0.492761] system 00:01: [io  0x0c14] has been reserved
419
[    0.492764] system 00:01: [io  0x0c50-0x0c51] has been reserved
420
[    0.492766] system 00:01: [io  0x0c52] has been reserved
421
[    0.492769] system 00:01: [io  0x0c6c] has been reserved
422
[    0.492771] system 00:01: [io  0x0c6f] has been reserved
423
[    0.492774] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
424
[    0.492776] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
425
[    0.492779] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
426
[    0.492782] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
427
[    0.492784] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
428
[    0.492787] system 00:01: [io  0x0800-0x089f] has been reserved
429
[    0.492789] system 00:01: [io  0x0b20-0x0b3f] has been reserved
430
[    0.492792] system 00:01: [io  0x0900-0x090f] has been reserved
431
[    0.492795] system 00:01: [io  0x0910-0x091f] has been reserved
432
[    0.492798] system 00:01: [io  0xfe00-0xfefe] has been reserved
433
[    0.492802] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
434
[    0.492806] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
435
[    0.492809] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
436
[    0.492812] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
437
[    0.492816] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
438
[    0.492819] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
439
[    0.492822] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
440
[    0.492828] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
441
[    0.493207] system 00:02: [io  0x0300-0x031f] has been reserved
442
[    0.493210] system 00:02: [io  0x0290-0x029f] has been reserved
443
[    0.493213] system 00:02: [io  0x0230-0x023f] has been reserved
444
[    0.493218] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
445
[    0.493286] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
446
[    0.493413] system 00:04: [io  0x04d0-0x04d1] has been reserved
447
[    0.493418] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
448
[    0.493516] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
449
[    0.493906] system 00:06: [mem 0xa8000000-0xbfffffff] has been reserved
450
[    0.493911] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
451
[    0.494127] pnp: PnP ACPI: found 7 devices
452
[    0.504639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
453
[    0.504676] pci 0000:00:04.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
454
[    0.504682] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
455
[    0.504737] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
456
[    0.504741] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
457
[    0.504744] pci 0000:00:04.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
458
[    0.504746] pci 0000:00:04.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
459
[    0.504763] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0100000-0xd02fffff 64bit pref]
460
[    0.504771] pci 0000:00:04.0: BAR 13: assigned [io  0x1000-0x1fff]
461
[    0.504776] pci 0000:00:04.0: PCI bridge to [bus 01]
462
[    0.504780] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
463
[    0.504786] pci 0000:00:04.0:   bridge window [mem 0xfe600000-0xfe7fffff]
464
[    0.504791] pci 0000:00:04.0:   bridge window [mem 0xd0100000-0xd02fffff 64bit pref]
465
[    0.504798] pci 0000:00:14.4: PCI bridge to [bus 02]
466
[    0.504815] pci 0000:00:15.0: PCI bridge to [bus 03]
467
[    0.504821] pci 0000:00:15.0:   bridge window [mem 0xfea00000-0xfeafffff]
468
[    0.504833] pci 0000:00:15.1: PCI bridge to [bus 04]
469
[    0.504836] pci 0000:00:15.1:   bridge window [io  0xe000-0xefff]
470
[    0.504845] pci 0000:00:15.1:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
471
[    0.504853] pci 0000:00:15.2: PCI bridge to [bus 05]
472
[    0.504860] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
473
[    0.504871] pci 0000:00:15.3: PCI bridge to [bus 06]
474
[    0.504877] pci 0000:00:15.3:   bridge window [mem 0xfe800000-0xfe8fffff]
475
[    0.504892] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
476
[    0.504895] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
477
[    0.504898] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
478
[    0.504900] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
479
[    0.504903] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
480
[    0.504905] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
481
[    0.504908] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
482
[    0.504910] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
483
[    0.504913] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
484
[    0.504915] pci_bus 0000:01: resource 2 [mem 0xd0100000-0xd02fffff 64bit pref]
485
[    0.504918] pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
486
[    0.504921] pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
487
[    0.504923] pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
488
[    0.504925] pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
489
[    0.504928] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
490
[    0.504930] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
491
[    0.504933] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
492
[    0.504936] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
493
[    0.504938] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
494
[    0.504941] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
495
[    0.504943] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
496
[    0.504946] pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
497
[    0.505140] NET: Registered protocol family 2
498
[    0.505579] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
499
[    0.505946] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
500
[    0.506485] TCP: Hash tables configured (established 65536 bind 65536)
501
[    0.506610] UDP hash table entries: 4096 (order: 5, 131072 bytes)
502
[    0.506701] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
503
[    0.506889] NET: Registered protocol family 1
504
[    0.506926] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
505
[    0.878161] PCI: CLS 64 bytes, default 64
506
[    0.878291] Unpacking initramfs...
507
[    2.122555] Freeing initrd memory: 41952K
508
[    2.122562] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
509
[    2.122567] software IO TLB [mem 0xa1b87000-0xa5b87000] (64MB) mapped at [ffff9b5421b87000-ffff9b5425b86fff]
510
[    2.122732] LVT offset 0 assigned for vector 0x400
511
[    2.122868] perf: AMD IBS detected (0x000000ff)
512
[    2.122994] Scanning for low memory corruption every 60 seconds
513
[    2.123777] audit: initializing netlink subsys (disabled)
514
[    2.124073] audit: type=2000 audit(1496045649.884:1): initialized
515
[    2.124711] Initialise system trusted keyrings
516
[    2.125219] workingset: timestamp_bits=36 max_order=21 bucket_order=0
517
[    2.128651] zbud: loaded
518
[    2.129931] squashfs: version 4.0 (2009/01/31) Phillip Lougher
519
[    2.130632] fuse init (API version 7.26)
520
[    2.133809] Key type asymmetric registered
521
[    2.133813] Asymmetric key parser 'x509' registered
522
[    2.133933] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
523
[    2.134002] io scheduler noop registered
524
[    2.134004] io scheduler deadline registered
525
[    2.134022] io scheduler cfq registered (default)
526
[    2.134992] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
527
[    2.134994] vesafb: scrolling: redraw
528
[    2.134997] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
529
[    2.135026] vesafb: framebuffer at 0xc0000000, mapped to 0xffffbc9401800000, using 5824k, total 5824k
530
[    2.135394] Console: switching to colour frame buffer device 175x65
531
[    2.135454] fb0: VESA VGA frame buffer device
532
[    2.135645] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
533
[    2.135652] ACPI: Power Button [PWRB]
534
[    2.135735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
535
[    2.135738] ACPI: Power Button [PWRF]
536
[    2.136418] GHES: HEST is not enabled!
537
[    2.136654] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
538
[    2.140245] Linux agpgart interface v0.103
539
[    2.143957] loop: module loaded
540
[    2.144386] libphy: Fixed MDIO Bus: probed
541
[    2.144388] tun: Universal TUN/TAP device driver, 1.6
542
[    2.144389] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
543
[    2.144462] PPP generic driver version 2.4.2
544
[    2.144558] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545
[    2.144567] ehci-pci: EHCI PCI platform driver
546
[    2.144811] QUIRK: Enable AMD PLL fix
547
[    2.144896] ehci-pci 0000:00:12.2: EHCI Host Controller
548
[    2.144908] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
549
[    2.144916] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
550
[    2.144929] ehci-pci 0000:00:12.2: debug port 1
551
[    2.145004] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
552
[    2.161079] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
553
[    2.161833] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
554
[    2.161838] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
555
[    2.161841] usb usb1: Product: EHCI Host Controller
556
[    2.161843] usb usb1: Manufacturer: Linux 4.10.0-21-generic ehci_hcd
557
[    2.161845] usb usb1: SerialNumber: 0000:00:12.2
558
[    2.162208] hub 1-0:1.0: USB hub found
559
[    2.162223] hub 1-0:1.0: 5 ports detected
560
[    2.162885] ehci-pci 0000:00:13.2: EHCI Host Controller
561
[    2.162897] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
562
[    2.162904] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
563
[    2.162918] ehci-pci 0000:00:13.2: debug port 1
564
[    2.162974] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
565
[    2.177075] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
566
[    2.177245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
567
[    2.177248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
568
[    2.177251] usb usb2: Product: EHCI Host Controller
569
[    2.177253] usb usb2: Manufacturer: Linux 4.10.0-21-generic ehci_hcd
570
[    2.177256] usb usb2: SerialNumber: 0000:00:13.2
571
[    2.177756] hub 2-0:1.0: USB hub found
572
[    2.177773] hub 2-0:1.0: 5 ports detected
573
[    2.178467] ehci-pci 0000:00:16.2: EHCI Host Controller
574
[    2.178478] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
575
[    2.178486] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
576
[    2.178499] ehci-pci 0000:00:16.2: debug port 1
577
[    2.178551] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
578
[    2.193088] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
579
[    2.193225] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
580
[    2.193229] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
581
[    2.193231] usb usb3: Product: EHCI Host Controller
582
[    2.193233] usb usb3: Manufacturer: Linux 4.10.0-21-generic ehci_hcd
583
[    2.193236] usb usb3: SerialNumber: 0000:00:16.2
584
[    2.193724] hub 3-0:1.0: USB hub found
585
[    2.193743] hub 3-0:1.0: 4 ports detected
586
[    2.194191] ehci-platform: EHCI generic platform driver
587
[    2.194220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
588
[    2.194234] ohci-pci: OHCI PCI platform driver
589
[    2.194469] ohci-pci 0000:00:12.0: OHCI PCI host controller
590
[    2.194483] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
591
[    2.194532] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
592
[    2.257198] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
593
[    2.257202] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
594
[    2.257205] usb usb4: Product: OHCI PCI host controller
595
[    2.257207] usb usb4: Manufacturer: Linux 4.10.0-21-generic ohci_hcd
596
[    2.257209] usb usb4: SerialNumber: 0000:00:12.0
597
[    2.257739] hub 4-0:1.0: USB hub found
598
[    2.257758] hub 4-0:1.0: 5 ports detected
599
[    2.258436] ohci-pci 0000:00:13.0: OHCI PCI host controller
600
[    2.258447] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
601
[    2.258501] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
602
[    2.321178] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
603
[    2.321183] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
604
[    2.321185] usb usb5: Product: OHCI PCI host controller
605
[    2.321188] usb usb5: Manufacturer: Linux 4.10.0-21-generic ohci_hcd
606
[    2.321190] usb usb5: SerialNumber: 0000:00:13.0
607
[    2.321726] hub 5-0:1.0: USB hub found
608
[    2.321745] hub 5-0:1.0: 5 ports detected
609
[    2.322408] ohci-pci 0000:00:14.5: OHCI PCI host controller
610
[    2.322419] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
611
[    2.322466] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
612
[    2.385167] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
613
[    2.385172] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
614
[    2.385174] usb usb6: Product: OHCI PCI host controller
615
[    2.385177] usb usb6: Manufacturer: Linux 4.10.0-21-generic ohci_hcd
616
[    2.385179] usb usb6: SerialNumber: 0000:00:14.5
617
[    2.385652] hub 6-0:1.0: USB hub found
618
[    2.385671] hub 6-0:1.0: 2 ports detected
619
[    2.386126] ohci-pci 0000:00:16.0: OHCI PCI host controller
620
[    2.386140] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
621
[    2.386187] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
622
[    2.449187] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
623
[    2.449192] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
624
[    2.449194] usb usb7: Product: OHCI PCI host controller
625
[    2.449197] usb usb7: Manufacturer: Linux 4.10.0-21-generic ohci_hcd
626
[    2.449199] usb usb7: SerialNumber: 0000:00:16.0
627
[    2.449707] hub 7-0:1.0: USB hub found
628
[    2.449726] hub 7-0:1.0: 4 ports detected
629
[    2.450216] ohci-platform: OHCI generic platform driver
630
[    2.450243] uhci_hcd: USB Universal Host Controller Interface driver
631
[    2.450458] xhci_hcd 0000:05:00.0: xHCI Host Controller
632
[    2.450469] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
633
[    2.509793] usb 1-3: new high-speed USB device number 2 using ehci-pci
634
[    2.509905] xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
635
[    2.510206] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
636
[    2.510209] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
637
[    2.510211] usb usb8: Product: xHCI Host Controller
638
[    2.510214] usb usb8: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
639
[    2.510216] usb usb8: SerialNumber: 0000:05:00.0
640
[    2.510667] hub 8-0:1.0: USB hub found
641
[    2.510689] hub 8-0:1.0: 2 ports detected
642
[    2.510901] xhci_hcd 0000:05:00.0: xHCI Host Controller
643
[    2.510909] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
644
[    2.510958] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
645
[    2.511004] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
646
[    2.511007] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
647
[    2.511009] usb usb9: Product: xHCI Host Controller
648
[    2.511011] usb usb9: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
649
[    2.511014] usb usb9: SerialNumber: 0000:05:00.0
650
[    2.511458] hub 9-0:1.0: USB hub found
651
[    2.511478] hub 9-0:1.0: 2 ports detected
652
[    2.511895] xhci_hcd 0000:06:00.0: xHCI Host Controller
653
[    2.511905] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
654
[    2.571390] xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
655
[    2.571719] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
656
[    2.571722] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
657
[    2.571724] usb usb10: Product: xHCI Host Controller
658
[    2.571726] usb usb10: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
659
[    2.571729] usb usb10: SerialNumber: 0000:06:00.0
660
[    2.572193] hub 10-0:1.0: USB hub found
661
[    2.572214] hub 10-0:1.0: 2 ports detected
662
[    2.572436] xhci_hcd 0000:06:00.0: xHCI Host Controller
663
[    2.572445] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
664
[    2.572485] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
665
[    2.572532] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
666
[    2.572535] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
667
[    2.572537] usb usb11: Product: xHCI Host Controller
668
[    2.572539] usb usb11: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
669
[    2.572541] usb usb11: SerialNumber: 0000:06:00.0
670
[    2.573020] hub 11-0:1.0: USB hub found
671
[    2.573049] hub 11-0:1.0: 2 ports detected
672
[    2.573337] i8042: PNP: No PS/2 controller found.
673
[    2.573834] mousedev: PS/2 mouse device common for all mice
674
[    2.574567] rtc_cmos 00:03: RTC can wake from S4
675
[    2.574775] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
676
[    2.574817] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
677
[    2.574836] i2c /dev entries driver
678
[    2.574966] device-mapper: uevent: version 1.0.3
679
[    2.575119] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
680
[    2.575181] ledtrig-cpu: registered to indicate activity on CPUs
681
[    2.575999] NET: Registered protocol family 10
682
[    2.585659] Segment Routing with IPv6
683
[    2.585708] NET: Registered protocol family 17
684
[    2.585733] Key type dns_resolver registered
685
[    2.586245] microcode: CPU0: patch_level=0x0500010d
686
[    2.586255] microcode: CPU1: patch_level=0x0500010d
687
[    2.586323] microcode: Microcode Update Driver: v2.2.
688
[    2.586575] registered taskstats version 1
689
[    2.586595] Loading compiled-in X.509 certificates
690
[    2.593504] Loaded X.509 cert 'Build time autogenerated kernel key: 076916404334531687c024ac374ddee3531ea9b2'
691
[    2.593571] zswap: loaded using pool lzo/zbud
692
[    2.627079] Key type big_key registered
693
[    2.627095] Key type trusted registered
694
[    2.631503] Key type encrypted registered
695
[    2.631512] AppArmor: AppArmor sha1 policy hashing enabled
696
[    2.631517] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
697
[    2.631574] evm: HMAC attrs: 0x1
698
[    2.632162]   Magic number: 1:189:221
699
[    2.632275] acpi device:3f: hash matches
700
[    2.632414] rtc_cmos 00:03: setting system clock to 2017-05-29 08:14:11 UTC (1496045651)
701
[    2.632691] acpi_cpufreq: overriding BIOS provided _PSD data
702
[    2.632891] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
703
[    2.632892] EDD information not available.
704
[    2.633009] PM: Hibernation image not present or could not be loaded.
705
[    2.637826] Freeing unused kernel memory: 2228K
706
[    2.637830] Write protecting the kernel read-only data: 14336k
707
[    2.639002] Freeing unused kernel memory: 1144K
708
[    2.640483] Freeing unused kernel memory: 280K
709
[    2.658644] x86/mm: Checked W+X mappings: passed, no W+X pages found.
710
[    2.661927] usb 1-3: New USB device found, idVendor=0572, idProduct=c688
711
[    2.661931] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
712
[    2.661934] usb 1-3: Product: USB Stick
713
[    2.661936] usb 1-3: Manufacturer: Max
714
[    2.661938] usb 1-3: SerialNumber: 080116
715
[    2.687819] random: systemd-udevd: uninitialized urandom read (16 bytes read)
716
[    2.688001] random: systemd-udevd: uninitialized urandom read (16 bytes read)
717
[    2.688027] random: systemd-udevd: uninitialized urandom read (16 bytes read)
718
[    2.689868] random: udevadm: uninitialized urandom read (16 bytes read)
719
[    2.689952] random: udevadm: uninitialized urandom read (16 bytes read)
720
[    2.692569] random: udevadm: uninitialized urandom read (16 bytes read)
721
[    2.692711] random: udevadm: uninitialized urandom read (16 bytes read)
722
[    2.692941] random: udevadm: uninitialized urandom read (16 bytes read)
723
[    2.693088] random: udevadm: uninitialized urandom read (16 bytes read)
724
[    2.693222] random: udevadm: uninitialized urandom read (16 bytes read)
725
[    2.792962] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
726
[    2.811908] wmi: Mapper loaded
727
[    2.824720] [drm] Initialized
728
[    2.826854] ahci 0000:00:11.0: version 3.0
729
[    2.827202] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
730
[    2.827206] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs 
731
[    2.845717] scsi host0: ahci
732
[    2.846993] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08
733
[    2.847023] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
734
[    2.847045] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
735
[    2.847086] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
736
[    2.847108] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
737
[    2.856044] scsi host1: ahci
738
[    2.864973] bcma: bus0: Bus registered
739
[    2.876836] usb 5-4: new full-speed USB device number 2 using ohci-pci
740
[    2.881152] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
741
[    2.881173] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
742
[    2.882248] r8169 0000:04:00.0 eth0: RTL8168f/8111f at 0xffffbc9400ccd000, 60:a4:4c:af:46:46, XID 08000800 IRQ 30
743
[    2.882252] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
744
[    2.893757] scsi host2: ahci
745
[    2.903804] [drm] radeon kernel modesetting enabled.
746
[    2.907246] scsi host3: ahci
747
[    2.907655] scsi host4: ahci
748
[    2.907991] scsi host5: ahci
749
[    2.908104] ata1: SATA max UDMA/133 abar [email protected] port 0xfeb4f100 irq 19
750
[    2.908108] ata2: SATA max UDMA/133 abar [email protected] port 0xfeb4f180 irq 19
751
[    2.908112] ata3: SATA max UDMA/133 abar [email protected] port 0xfeb4f200 irq 19
752
[    2.908115] ata4: SATA max UDMA/133 abar [email protected] port 0xfeb4f280 irq 19
753
[    2.908118] ata5: SATA max UDMA/133 abar [email protected] port 0xfeb4f300 irq 19
754
[    2.908121] ata6: SATA max UDMA/133 abar [email protected] port 0xfeb4f380 irq 19
755
[    2.926137] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
756
[    2.926140] AMD IOMMUv2 functionality not available on this system
757
[    2.934421] CRAT table not found
758
[    2.934424] Finished initializing topology ret=0
759
[    2.934453] kfd kfd: Initialized module
760
[    2.934789] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
761
[    2.934792] fb: switching to radeondrmfb from VESA VGA
762
[    2.934851] Console: switching to colour dummy device 80x25
763
[    2.935513] [drm] initializing kernel modesetting (PALM 0x1002:0x9808 0x1043:0x8571 0x00).
764
[    2.935539] [drm] register mmio base: 0xFEB00000
765
[    2.935541] [drm] register mmio size: 262144
766
[    2.935633] ATOM BIOS: AMD
767
[    2.935704] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
768
[    2.935707] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
769
[    2.935714] [drm] Detected VRAM RAM=384M, BAR=256M
770
[    2.935715] [drm] RAM width 32bits DDR
771
[    2.935846] [TTM] Zone  kernel: Available graphics memory: 3868516 kiB
772
[    2.935847] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
773
[    2.935848] [TTM] Initializing pool allocator
774
[    2.935857] [TTM] Initializing DMA pool allocator
775
[    2.935903] [drm] radeon: 384M of VRAM memory ready
776
[    2.935905] [drm] radeon: 1024M of GTT memory ready.
777
[    2.935918] [drm] Loading PALM Microcode
778
[    2.936049] [drm] Internal thermal controller without fan control
779
[    2.936141] [drm] Found smc ucode version: 0x00010601
780
[    2.936225] [drm] radeon: dpm initialized
781
[    2.936499] [drm] GART: num cpu pages 262144, num gpu pages 262144
782
[    2.947235] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
783
[    2.947515] radeon 0000:00:01.0: WB enabled
784
[    2.947520] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff9b55acf8ac00
785
[    2.947523] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff9b55acf8ac0c
786
[    2.947945] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffbc9401632118
787
[    2.947949] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
788
[    2.947950] [drm] Driver supports precise vblank timestamp query.
789
[    2.947952] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
790
[    2.948032] radeon 0000:00:01.0: radeon: using MSI.
791
[    2.948068] [drm] radeon: irq initialized.
792
[    2.971380] [drm] ring test on 0 succeeded in 1 usecs
793
[    2.971390] [drm] ring test on 3 succeeded in 3 usecs
794
[    3.000511] r8169 0000:04:00.0 enp4s0: renamed from eth0
795
[    3.017132] [drm] ring test on 5 succeeded in 1 usecs
796
[    3.036992] [drm] UVD initialized successfully.
797
[    3.037745] [drm] ib test on ring 0 succeeded in 0 usecs
798
[    3.037788] [drm] ib test on ring 3 succeeded in 0 usecs
799
[    3.071325] usb 5-4: New USB device found, idVendor=0b05, idProduct=17b5
800
[    3.071332] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
801
[    3.071337] usb 5-4: Product: BCM20702A0
802
[    3.071342] usb 5-4: Manufacturer: Broadcom Corp
803
[    3.071346] usb 5-4: SerialNumber: DC85DE6756A5
804
[    3.105013] usb 4-4: new full-speed USB device number 2 using ohci-pci
805
[    3.144835] tsc: Refined TSC clocksource calibration: 1750.895 MHz
806
[    3.144849] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x193cf5f6454, max_idle_ns: 440795276631 ns
807
[    3.224906] ata4: SATA link down (SStatus 0 SControl 300)
808
[    3.229965] ata5: SATA link down (SStatus 0 SControl 300)
809
[    3.232568] ata6: SATA link down (SStatus 0 SControl 300)
810
[    3.297966] usb 4-4: New USB device found, idVendor=046d, idProduct=c52b
811
[    3.297974] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
812
[    3.297979] usb 4-4: Product: USB Receiver
813
[    3.297983] usb 4-4: Manufacturer: Logitech
814
[    3.313442] hidraw: raw HID events driver (C) Jiri Kosina
815
[    3.331107] usbcore: registered new interface driver usbhid
816
[    3.331110] usbhid: USB HID core driver
817
[    3.339857] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-4/input2
818
[    3.381020] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
819
[    3.381068] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
820
[    3.381106] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
821
[    3.381649] ata1.00: ATA-9: SanDisk SDSSDP128G, 2.0.0, max UDMA/133
822
[    3.381657] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
823
[    3.382301] ata1.00: configured for UDMA/133
824
[    3.382385] ata2.00: ATA-8: ST3500312CS, SC13, max UDMA/133
825
[    3.382393] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
826
[    3.382965] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDP12 0    PQ: 0 ANSI: 5
827
[    3.383812] ata2.00: configured for UDMA/133
828
[    3.404693] ata3.00: ATA-9: ST3000DM001-1CH166, CC29, max UDMA/133
829
[    3.404701] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
830
[    3.405930] ata3.00: configured for UDMA/133
831
[    3.413577] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
832
[    3.413606] sd 0:0:0:0: [sda] Write Protect is off
833
[    3.413609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
834
[    3.413652] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
835
[    3.413836] sd 0:0:0:0: Attached scsi generic sg0 type 0
836
[    3.414696] scsi 1:0:0:0: Direct-Access     ATA      ST3500312CS      SC13 PQ: 0 ANSI: 5
837
[    3.415293]  sda: sda1 sda2 sda3 sda4 < sda5 >
838
[    3.417164] sd 0:0:0:0: [sda] Attached SCSI disk
839
[    3.445432] sd 1:0:0:0: Attached scsi generic sg1 type 0
840
[    3.445766] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
841
[    3.445793] sd 1:0:0:0: [sdb] Write Protect is off
842
[    3.445797] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
843
[    3.445840] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
844
[    3.446386] scsi 2:0:0:0: Direct-Access     ATA      ST3000DM001-1CH1 CC29 PQ: 0 ANSI: 5
845
[    3.476245] input: Logitech K400 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input2
846
[    3.476518] logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:12.0-4:1
847
[    3.481580] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
848
[    3.481585] sd 2:0:0:0: [sdc] 4096-byte physical blocks
849
[    3.481612] sd 2:0:0:0: [sdc] Write Protect is off
850
[    3.481615] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
851
[    3.481659] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
852
[    3.481712] sd 2:0:0:0: Attached scsi generic sg2 type 0
853
[    3.494069]  sdb: sdb1
854
[    3.494952] sd 1:0:0:0: [sdb] Attached SCSI disk
855
[    3.540803]  sdc: sdc1 sdc2
856
[    3.541733] sd 2:0:0:0: [sdc] Attached SCSI disk
857
[    3.560919] [drm] ib test on ring 5 succeeded
858
[    3.582084] [drm] Radeon Display Connectors
859
[    3.582086] [drm] Connector 0:
860
[    3.582087] [drm]   HDMI-A-1
861
[    3.582088] [drm]   HPD1
862
[    3.582091] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
863
[    3.582092] [drm]   Encoders:
864
[    3.582093] [drm]     DFP1: INTERNAL_UNIPHY
865
[    3.582094] [drm] Connector 1:
866
[    3.582095] [drm]   DVI-I-1
867
[    3.582096] [drm]   HPD2
868
[    3.582098] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
869
[    3.582098] [drm]   Encoders:
870
[    3.582099] [drm]     DFP2: INTERNAL_UNIPHY
871
[    3.582101] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
872
[    3.587897] random: fast init done
873
[    3.660316] [drm] fb mappable at 0xC0366000
874
[    3.660319] [drm] vram apper at 0xC0000000
875
[    3.660320] [drm] size 8294400
876
[    3.660322] [drm] fb depth is 24
877
[    3.660322] [drm]    pitch is 7680
878
[    3.660637] fbcon: radeondrmfb (fb0) is primary device
879
[    3.660885] Console: switching to colour frame buffer device 240x67
880
[    3.660965] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
881
[    3.676983] [drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0
882
[    4.169006] clocksource: Switched to clocksource tsc
883
[    4.947271] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
884
[    5.303939] ip_tables: (C) 2000-2006 Netfilter Core Team
885
[    5.319554] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
886
[    5.319867] systemd[1]: Detected architecture x86-64.
887
[    5.320556] systemd[1]: Set hostname to <bramley-PC>.
888
[    5.565244] systemd[1]: Listening on udev Control Socket.
889
[    5.565764] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
890
[    5.565877] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
891
[    5.565973] systemd[1]: Listening on Journal Socket (/dev/log).
892
[    5.566333] systemd[1]: Created slice User and Session Slice.
893
[    5.566474] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
894
[    5.566559] systemd[1]: Listening on Syslog Socket.
895
[    5.604861] random: crng init done
896
[    5.671807] lp: driver loaded but no devices found
897
[    5.685662] ppdev: user-space parallel port driver
898
[    5.823331] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
899
[    5.928940] systemd-journald[241]: Received request to flush runtime journal from PID 1
900
[    6.060708] Adding 1199220k swap on /swapfile.  Priority:-1 extents:5 across:1231988k SSFS
901
[    6.454617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
902
[    6.635242] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
903
[    6.635254] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
904
[    6.642342] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
905
[    6.738691] media: loading out-of-tree module taints kernel.
906
[    6.738797] media: module verification failed: signature and/or required key missing - tainting kernel
907
[    6.739844] media: Linux media interface: v0.10
908
[    6.746630] WARNING: You are using an experimental version of the media stack.
909
               	As the driver is backported to an older kernel, it doesn't offer
910
               	enough quality for its usage in production.
911
               	Use it with care.
912
               Latest git patches (needed if you report a bug to [email protected]):
913
               	00c1eb060dd39aa20b29140ebd6efa3b9c48840e tbs5520se: Fix frontend names.
914
[    6.753728] WARNING: You are using an experimental version of the media stack.
915
               	As the driver is backported to an older kernel, it doesn't offer
916
               	enough quality for its usage in production.
917
               	Use it with care.
918
               Latest git patches (needed if you report a bug to [email protected]):
919
               	00c1eb060dd39aa20b29140ebd6efa3b9c48840e tbs5520se: Fix frontend names.
920
[    6.789275] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
921
[    6.836866] Linux video capture interface: v2.00
922
[    6.836871] WARNING: You are using an experimental version of the media stack.
923
               	As the driver is backported to an older kernel, it doesn't offer
924
               	enough quality for its usage in production.
925
               	Use it with care.
926
               Latest git patches (needed if you report a bug to [email protected]):
927
               	00c1eb060dd39aa20b29140ebd6efa3b9c48840e tbs5520se: Fix frontend names.
928
[    6.981782] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
929
[    6.982762] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC898: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
930
[    6.982766] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
931
[    6.982769] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
932
[    6.982771] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
933
[    6.982774] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x1e
934
[    6.982776] snd_hda_codec_realtek hdaudioC1D0:    inputs:
935
[    6.982780] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
936
[    6.982783] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
937
[    6.982785] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
938
[    7.007135] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
939
[    7.007272] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
940
[    7.007398] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
941
[    7.007519] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
942
[    7.008768] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
943
[    7.041515] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
944
[    7.041758] dvbdev: DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
945
[    7.068727] i2c i2c-13: Added multiplexed i2c bus 14
946
[    7.068734] si2168 13-0064: Silicon Labs Si2168-B40 successfully identified
947
[    7.068737] si2168 13-0064: firmware version: B 4.0.2
948
[    7.091185] cx23885: cx23885 driver version 0.0.4 loaded
949
[    7.091431] cx23885: CORE cx23885[0]: subsystem: 6981:8888, board: TurboSight TBS 6981 DVB-S/S2 [card=40,autodetected]
950
[    7.104685] si2157 14-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
951
[    7.104728] usb 1-3: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
952
[    7.176714] rc rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc0
953
[    7.191352] Bluetooth: Core ver 2.22
954
[    7.191383] NET: Registered protocol family 31
955
[    7.191384] Bluetooth: HCI device and connection manager initialized
956
[    7.191393] Bluetooth: HCI socket layer initialized
957
[    7.191397] Bluetooth: L2CAP socket layer initialized
958
[    7.191414] Bluetooth: SCO socket layer initialized
959
[    7.278179] usbcore: registered new interface driver btusb
960
[    7.283751] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
961
[    7.284766] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
962
[    7.284778] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
963
[    7.286885] Broadcom 43xx driver loaded [ Features: PNL ]
964
[    7.397018] Bluetooth: hci0: BCM: chip id 63
965
[    7.414037] Bluetooth: hci0: BCM20702A
966
[    7.416047] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
967
[    7.416863] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17b5.hcd failed with error -2
968
[    7.416870] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17b5.hcd not found
969
[    7.460521] Registered IR keymap rc-total-media-in-hand-02
970
[    7.460660] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-3/rc/rc0/input9
971
[    7.460763] dvb-usb: schedule remote query interval to 100 msecs.
972
[    7.460837] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
973
[    7.460897] usbcore: registered new interface driver dvb_usb_cxusb
974
[    7.750949] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
975
[    7.867333] kvm: Nested Virtualization enabled
976
[    7.867338] kvm: Nested Paging enabled
977
[    8.393416] asus_wmi: ASUS WMI generic driver loaded
978
[    8.431400] asus_wmi: Initialization: 0x0
979
[    8.431463] asus_wmi: BIOS WMI version: 0.9
980
[    8.431558] asus_wmi: SFUN value: 0x0
981
[    8.432387] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
982
[    8.435952] asus_wmi: Number of fans: 1
983
[    8.935525] b43 bcma0:1 wlp3s0b1: renamed from wlan0
984
[    8.979639] audit: type=1400 audit(1496045657.840:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=698 comm="apparmor_parser"
985
[    8.982068] audit: type=1400 audit(1496045657.844:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=699 comm="apparmor_parser"
986
[    8.991381] audit: type=1400 audit(1496045657.852:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=701 comm="apparmor_parser"
987
[    8.991390] audit: type=1400 audit(1496045657.852:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=701 comm="apparmor_parser"
988
[    8.996079] audit: type=1400 audit(1496045657.856:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=704 comm="apparmor_parser"
989
[    8.996091] audit: type=1400 audit(1496045657.856:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=704 comm="apparmor_parser"
990
[    8.996097] audit: type=1400 audit(1496045657.856:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=704 comm="apparmor_parser"
991
[    8.996102] audit: type=1400 audit(1496045657.856:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=704 comm="apparmor_parser"
992
[    8.999755] audit: type=1400 audit(1496045657.860:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=705 comm="apparmor_parser"
993
[    9.016333] audit: type=1400 audit(1496045657.876:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=710 comm="apparmor_parser"
994
[    9.256589] cx25840 17-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
995
[    9.466694] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
996
[    9.466698] Bluetooth: BNEP filters: protocol multicast
997
[    9.466707] Bluetooth: BNEP socket layer initialized
998
[   10.332911] systemd[1]: motd-news.timer: Adding 23min 16.104980s random time.
999
[   10.509262] cx25840 17-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
1000
[   10.538478] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
1001
[   10.538486] cx23885: cx23885[0]: cx23885 based dvb card
1002
[   10.566442] cx24117 16-0055: creating new instance
1003
[   10.566452] i2c i2c-16: cx24117: Attaching frontend 0
1004
[   10.566458] dvbdev: DVB: registering new adapter (cx23885[0])
1005
[   10.566465] cx23885 0000:01:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6981 DVB-S/S2)...
1006
[   10.569947] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
1007
[   10.569952] cx23885: cx23885[0]: cx23885 based dvb card
1008
[   10.569966] cx24117 16-0055: attaching existing instance
1009
[   10.569973] i2c i2c-16: cx24117: Attaching frontend 1
1010
[   10.569978] dvbdev: DVB: registering new adapter (cx23885[0])
1011
[   10.569983] cx23885 0000:01:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6981 DVB-S/S2)...
1012
[   10.574446] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5
1013
[   10.574455] cx23885: cx23885[0]/0: found at 0000:01:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xfe600000
1014
[   10.799581] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
1015
[   10.909002] r8169 0000:04:00.0 enp4s0: link down
1016
[   10.909007] r8169 0000:04:00.0 enp4s0: link down
1017
[   10.911369] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
1018
[   10.959552] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
1019
[   11.160363] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
1020
[   11.278457] systemd[1]: motd-news.timer: Adding 12min 3.365128s random time.
1021
[   11.336848] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
1022
[   11.580881] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
1023
[   11.768432] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
1024
[   11.985925] IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
1025
[   14.244744] r8169 0000:04:00.0 enp4s0: link up
1026
[   14.244765] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
1027
[   17.527831] Bluetooth: RFCOMM TTY layer initialized
1028
[   17.527848] Bluetooth: RFCOMM socket layer initialized
1029
[   17.527861] Bluetooth: RFCOMM ver 1.11
1030
[   25.079762] systemd[1]: motd-news.timer: Adding 17min 10.211165s random time.
1031
[   32.554839] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-4/input2
1032
[   32.694114] input: Logitech K400 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:046D:C52B.0007/0003:046D:4024.0008/input/input11
1033
[   32.699755] logitech-hidpp-device 0003:046D:4024.0008: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:12.0-4:1
1034
[   35.643935] systemd[1]: motd-news.timer: Adding 2min 18.788882s random time.
1035
[   77.500684] logitech-hidpp-device 0003:046D:4024.0008: HID++ 2.0 device connected.
1036

(4-4/5)