I'm having an issue with no services showing in TVHeadend. I'll give you a little background first.

I don't have a dedicated linux box so i'm using VMware 8.0 with Ubuntu 12.10 installed. I am running Openelec 2.0 on my AMD fusion HTPC and have no issues with tvheadend 3.2.18 running on that, but i'm not going to be running Openelec soon so that's why I need this VMware box working for TVheadend. This is the first time installing TVheadend on a dedicated linux system so I followed the Comprehensive guide to installing tvheadend on Ubuntu with a HDHomeRun. Everything went smooth and I thought all was well but I just can't get TVheadend to pull any services when scanning.

TVHeadend - 3.2.34
VMware - 8.0
Ubuntu - 12.10

HDHomeRun -HDHR3-US

I have no issues using the HDhomeRun software on the Ubuntu box and pulling up video with VLC.

This is what the Web UI looking like with debug enabled

Jan 27 20:10:13 dvb: "/dev/dvb/adapter0" tuning to "479,028 kHz" (Initial autoscan) Jan 27 20:10:14 dvb: "479,028 kHz" on adapter "HDHomeRun ATSC", status changed to OK Jan 27 20:10:27 dvb: "479,028 kHz" on adapter "HDHomeRun ATSC", status changed to No signal Jan 27 20:10:28 dvb: "479,028 kHz" on adapter "HDHomeRun ATSC", status changed to OK Jan 27 20:10:33 dvb: "/dev/dvb/adapter0" tuning to "707,028 kHz" (Initial autoscan) Jan 27 20:10:53 dvb: "/dev/dvb/adapter0" tuning to "485,028 kHz" (Initial autoscan) Jan 27 20:10:56 dvb: "485,028 kHz" on adapter "HDHomeRun ATSC", status changed to No signal Jan 27 20:10:57 dvb: "485,028 kHz" on adapter "HDHomeRun ATSC", status changed to OK Jan 27 20:11:13 dvb: "/dev/dvb/adapter0" tuning to "581,028 kHz" (Initial autoscan) Jan 27 20:11:33 dvb: "/dev/dvb/adapter0" tuning to "641,028 kHz" (Initial autoscan) Jan 27 20:11:53 dvb: "/dev/dvb/adapter0" tuning to "755,028 kHz" (Initial autoscan) Jan 27 20:12:13 dvb: "/dev/dvb/adapter0" tuning to "743,028 kHz" (Initial autoscan) Jan 27 20:12:33 dvb: "/dev/dvb/adapter0" tuning to "557,028 kHz" (Initial autoscan) Jan 27 20:12:53 dvb: "/dev/dvb/adapter0" tuning to "491,028 kHz" (Initial autoscan) Jan 27 20:13:13 dvb: "/dev/dvb/adapter0" tuning to "551,028 kHz" (Initial autoscan) Jan 27 20:13:33 dvb: "/dev/dvb/adapter0" tuning to "659,028 kHz" (Initial autoscan) Jan 27 20:13:35 dvb: "659,028 kHz" on adapter "HDHomeRun ATSC", status changed to Bad signal Jan 27 20:13:36 dvb: "659,028 kHz" on adapter "HDHomeRun ATSC", status changed to OK Jan 27 20:13:53 dvb: "/dev/dvb/adapter0" tuning to "85,028 kHz" (Initial autoscan) Jan 27 20:14:01 dvb: "85,028 kHz" on adapter "HDHomeRun ATSC", status changed to No signal Jan 27 20:14:02 dvb: "85,028 kHz" on adapter "HDHomeRun ATSC", status changed to OK

It will finish the scanning of Mux's but the services section shows 0.

I ran w_scan from terminal and everything looks fine

matt@ubuntu:/etc$ w_scan -c US
w_scan version 20120605 (compiled for DVB API 5.5)
using settings for UNITED STATES
ATSC
VSB US/CA, DVB-T TW
scan type TERRCABLE_ATSC, channellist 1
output format vdr-1.6
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
    /dev/dvb/adapter0/frontend0 -> TERRCABLE_ATSC "HDHomeRun ATSC": good :-)
    /dev/dvb/adapter1/frontend0 -> TERRCABLE_ATSC "HDHomeRun ATSC": good :-)
Using TERRCABLE_ATSC frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_ 
Using DVB API 5.6
frontend 'HDHomeRun ATSC' supports
INVERSION_AUTO
8VSB
16VSB
QAM_64
QAM_256
FREQ (54.00MHz ... 858.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 
57000: 8VSB(time: 00:00) (time: 00:01) signal ok:
    8VSB     f=57000 kHz
63000: 8VSB(time: 00:02) (time: 00:03) signal ok:
    8VSB     f=63000 kHz
69000: 8VSB(time: 00:03) (time: 00:04) signal ok:
    8VSB     f=69000 kHz
79000: 8VSB(time: 00:05) (time: 00:06) signal ok:
    8VSB     f=79000 kHz
85000: 8VSB(time: 00:06) (time: 00:07) signal ok:
    8VSB     f=85000 kHz
177000: 8VSB(time: 00:07) (time: 00:09) signal ok:
    8VSB     f=177000 kHz
183000: 8VSB(time: 00:09) (time: 00:10) signal ok:
    8VSB     f=183000 kHz
189000: 8VSB(time: 00:10) (time: 00:12) signal ok:
    8VSB     f=189000 kHz
195000: 8VSB(time: 00:12) (time: 00:13) signal ok:
    8VSB     f=195000 kHz
201000: 8VSB(time: 00:13) (time: 00:14) signal ok:
    8VSB     f=201000 kHz
207000: 8VSB(time: 00:15) (time: 00:16) signal ok:
    8VSB     f=207000 kHz
213000: 8VSB(time: 00:16) (time: 00:17) signal ok:

I'm not sure if the issue is with TVHeadend, DVBhdhomerun driver or with me running this within VMware.

Any help would be greatly appreciated

Thank you