Elgato DHL tuner not seen by Tvheadend

Added by Pierrick HORPIN 21 days ago

Hi
I have install tvheadend 4.2 on raspberry, on linux the usb tuner is detected but in the tvheadend Gui there is no adapter detected :-(
What can I do ?

THanks for your help


Replies (5)

RE: Elgato DHL tuner not seen by Tvheadend - Added by Mark Clarkstone 21 days ago

Has the driver been loaded by the kernel? Check 'dmesg' for lines mentioning a dvb device, along the lines of "frontend registered". Or you can post your dmesg here if not sure. you can use termbin to paste it, so..

dmesg | nc termbin.com 9999

then paste the returned link here.

RE: Elgato DHL tuner not seen by Tvheadend - Added by Pierrick HORPIN 20 days ago

Hi Mark
thank you for your answer.

Yes it is regitered.

see dmesg here http://termbin.com/d17m

RE: Elgato DHL tuner not seen by Tvheadend - Added by Mark Clarkstone 20 days ago

as10x_usb: error during firmware upload part2

Looks suspicious, a quick google shows this: https://wiki.archlinux.org/index.php/PCTV_PicoStick_74e

RE: Elgato DHL tuner not seen by Tvheadend - Added by Pierrick HORPIN 20 days ago

hi,

I found another thread on google and modified /flash/cmdline.txt
now the Adapter is recognized wihin TVHeadend :)
but whan I do a scan no services are detected :(

see attachment.

Any help would be great !

RE: Elgato DHL tuner not seen by Tvheadend - Added by Mark Clarkstone 20 days ago

If you're using the pre-defined muxes, remove them and add a couple of muxes manually & tvh should find the rest. If you can't find any frequencies online use w_scan to discover the tuning params.

sudo apt-get install w-scan
sudo service tvheadend stop
sudo w_scan -ft -cfr > channels.conf

--- Once complete ---
sudo service tvheadend start

replace fr (france) with your current country code.

If you don't get any signal ok messages with the output something else is wrong.

(1-5/5)