ATSC-T (OTA) antenna hooked to a HDHomeRun Quatro. I get 22 UHF channels on the Quatro and can watch them on PC with Windows and HDHR App.
TVHeadEnd can see all four tuners and they work fine. When I use the predefined muxes for ATSC I only get 14 channels.
After looking I'm missing Virtual Channel 10.1, 10.2, 10.3, 10.4 (RF-26), and Virtual Channel 17.1, 17.2, 17.3 17.4 (RF-34).
I can look on the HDHomeRun tuner status page and see that 17.1 - 17.4 is 593.00 MHz and 10.1 - 10.4 is 545.000 MHz.
I tried to edit a Mux that failed and adjusted the frequency to 545.000 and again to 545.028 and they both fail still. Same with 593MHz range for 17.
I'm sure I'm missing something here but don't know enough to figure it out. I have tried using ALL of the predefined muxes with no joy.
Looking for somebody with a little more knowledge to lend a hand. If it matters these are WTEN, and WMHT out of Albany, New York.
In worse case scenario does anybody know how to for TVHeadEnd to scan a specific range in increments?
Thanks in Advance!