Mark Clarkstone wrote:
> What does the log at the bottom say? (click the bar).
>
> To test if the stick is working stop tvheadend (sudo service tvheadend stop), install w_scan (sudo apt install w-scan) and run it as "sudo w_scan -fc -Cde".
I don't know where to find Log files. But i found i should be able to set up what to log in Configuration -> Debugging -> Configuration. But in Configuration i don't see Debugging. By the way I use "HTS Tvheadend 4.3-1252~g595fd174f" (What bar do you mean?)
to the your w_scan. Yet it seems there are no drivers installed for it. This would explain the problem.
w_scan -fc -Cde
w_scan version 20161022 (compiled for DVB API 5.10)
WARNING: could not guess your country. Falling back to 'DE'
guessing country 'DE', use -c <country> to override
using settings for GERMANY
DVB cable
DVB-C
scan type CABLE, channellist 7
output format vdr-2.0
output charset 'DE'
Info: using DVB adapter auto detection.
main:3916: FATAL: ***** NO USEABLE CABLE CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
I found a driver and I will try it tomorrow if you don't have an other idea. thanks till now I will write you
https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-dualHD
The dmesg result you can see here
https://pastebin.com/kKKxHwTh